On 11/04/2014 03:52 PM, Alastair Neil wrote:
Thanks Jirka
So is this the workflow?
set the hosted-engine maintenance to global
shutdown the engine VM
make changes via virsh or editing vm.conf
sync changes to the other ha nodes
restart the VM
set hosted-engine maintenance
Hi.
No. I see no disks, VMs or templates on the imported storage domain. I do see
two OVF_STORE disks listed under 'Disks'
Regards.
Raul
- Original Message -
> From: "Maor Lipchuk"
> To: "Raul Laansoo"
> Cc: "Piotr Kliczewski" , "users"
> Sent: Wednesday, 5 November, 2014 9:01:36 AM
>
Hi Raul,
It is a known issue which should be fixed once
http://gerrit.ovirt.org/#/c/33154 will be merged.
Please disregard this log, it only indicates about disks which are not
OVF_STORE disks, the error there is misleading.
did you managed to register those VMs to the engine?
Regards,
Maor
Good morning.
Just a thought. Should the recovery only work when the 'source' data center has
already updated to 3.5 (both node and engine) or can I recover storage domains
from 3.4 data centers?
Regards.
Raul
- Original Message -
> From: "Raul Laansoo"
> To: "Maor Lipchuk"
> Cc: "Pio
[+gluster-users]
On 11/04/2014 05:05 PM, ml ml wrote:
Hello List,
i have a 2 Node Cluster with GlusterFS. After putting one machine in
Maintance and turning it off and on again the glustefs starts its
resync.
However, this process seems to be very slow.
iotop and iftop only show me a few hund
Hi,
Let me start with our original ovirt setup:
3 domains:
1. Test/dev
2. Production
3. Sandbox
1 ovirt-engine on vmware.
After the update to 3.5 I created 2 new VM's. Both on oVirt this time on
domain Test/dev.
I ran engine-setup on both the 2 new vms (and of course a engine-setup
aft
On 11/04/2014 01:54 PM, Nikita Kodkani wrote:
Hi,
To add further...
I read it somewhere on google, that to execute the shell commands in the
JavaScript we have to use node.js at the backend.
We don't want to spend time on learning the technology in this time frame.
-Does ovirt-engine provide A
On 04.11.2014 19:39, Einav Cohen wrote:
Hello Einav,
> OVF_STOREs are images that contain the meta-data of VMs and Disks
> that reside on that data-domain. This meta-data is used in case
> the data-domain is imported/exported to/from a different data-
> center or a different ovirt setup.
>
> more
OVF_STOREs are images that contain the meta-data of VMs and Disks
that reside on that data-domain. This meta-data is used in case
the data-domain is imported/exported to/from a different data-
center or a different ovirt setup.
more details in [1].
there is a BZ that requests separating these
Hello,
out of curiosity: After my DC was upgraded to 3.5 I have two disk images
called OVF_STORE on every data domain. What is their purpose?
Thanks
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen
I will he I.teresting to see your iscsi setup with drbd. Did you got
splitbrain before failure?
Did you check if your target went to readonly mode?
Thanks
Arman.
On Nov 4, 2014 5:40 PM, "Gianluca Cecchi" wrote:
>
> On Tue, Nov 4, 2014 at 11:39 AM, Itamar Heim wrote:
>
>> On 10/27/2014 06:48 PM,
On Tue, Nov 4, 2014 at 11:39 AM, Itamar Heim wrote:
> On 10/27/2014 06:48 PM, Gianluca Cecchi wrote:
>
>> Hello,
>> an iSCSI SD went down and it seems it is not able to come up again.
>>
>> From an iSCSI point of view all seems ok..
>>
>> [root@ovnode04 vdsm]# iscsiadm -m session -P 1
>> Target:
I am creating a VM and the copy from template operation has gone haywire
causing significant performance issues on the host server. I’d like to cancel
the copying image action (it’s been running ~3hours on a 3GB disk image copy)
but I cannot find anything in the web UI to cancel a task. Is th
- Original Message -
> From: "Vojtech Szocs"
> To: "Einav Cohen"
> Cc: "Oved Ourfali" , users@ovirt.org
> Sent: Tuesday, November 4, 2014 2:12:05 PM
> Subject: Re: [ovirt-users] webhook
>
>
>
> - Original Message -
> > From: "Einav Cohen"
> > To: "Vojtech Szocs"
> > Cc: "Ov
hello guys,
I'm triyng to use ovirt-scheduler-proxy, and for this, now, I'm starting
with examples available on:
https://github.com/oVirt/ovirt-scheduler-proxy/tree/master/doc/plugin_samples
so, on ovirt 3.5 fresh installation I've installed ovirt-scheduler-proxy
package (by yum), th
The app in Google may be half year old but there is a movement in git
[1] and the author recently called for testing or comments on
spice-devel ML.
David
[1]
https://github.com/iiordanov/remote-desktop-clients/tree/master/eclipse_projects/Opaque
On Pá, 2014-10-31 at 07:56 +0100, Gianluca Cecch
Thanks Jirka
So is this the workflow?
set the hosted-engine maintenance to global
> shutdown the engine VM
> make changes via virsh or editing vm.conf
> sync changes to the other ha nodes
> restart the VM
> set hosted-engine maintenance to none
Also, the patch for the broker will be in 3.5.1?
Hi everybody
when installing my first node (ovirt engine 3.5, iso node 3.0.4)
I start getting the node in my cluster and suddenly get
the following message :
Host Noeud-1 installation failed. Network error during communication
with the host
but my node is still available !!!
can somebody he
Hi all,
let us invite you to try out the latest addition to VDSM hooks: simple IPv6
configuration with oVirt's custom network properties :-)
In oVirt GUI you can now control 4 properties understood by VDSM's new IPv6
hook:
ipv6addr, ipv6gateway (IPv6 addresses)
ipv6autoconf, dhcpv6 (booleans
Hi,
To add further...
I read it somewhere on google, that to execute the shell commands in the
JavaScript we have to use node.js at the backend.
We don't want to spend time on learning the technology in this time frame.
-Does ovirt-engine provide API's for executing the shell commands?
Thanks,
- Original Message -
> From: "Yair Zaslavsky"
> To: "Einav Cohen"
> Cc: "Vojtech Szocs" , "Oved Ourfali" ,
> users@ovirt.org
> Sent: Friday, October 31, 2014 10:51:03 PM
> Subject: Re: [ovirt-users] webhook
>
>
>
> - Original Message -
> > From: "Einav Cohen"
> > To: "Vojte
- Original Message -
> From: "Einav Cohen"
> To: "Vojtech Szocs"
> Cc: "Oved Ourfali" , users@ovirt.org
> Sent: Friday, October 31, 2014 8:01:34 PM
> Subject: Re: [ovirt-users] webhook
>
> > - Original Message -
> > From: "Vojtech Szocs"
> > Sent: Friday, October 31, 2014 11:5
Hi,
currently ksmd is a single process
and is thus bound to one core.
This leads to some scaling problems such as:
If you got a lot of vms on one host with huge amounts
of ram you can observe that the cpu usage by ksmd
goes easily to 100%.
I wonder if ksmd could not be split up
in child/worker
On Sun, Nov 02, 2014 at 04:23:20AM -0800, Fawzy Ibrhim wrote:
> Can you give me the steps on how to run the VM using virsh on oVirt manager?
> I have tried that before but it asked for password and it did not accept the
> oVirt admin's password.
Vdsm configures libvirt so that it's HARDER to sta
Hello List,
i have a 2 Node Cluster with GlusterFS. After putting one machine in
Maintance and turning it off and on again the glustefs starts its
resync.
However, this process seems to be very slow.
iotop and iftop only show me a few hundred K/s.
Is this normal?
Thanks,
Mario
Il 04/11/2014 11:43, Itamar Heim ha scritto:
> On 11/04/2014 09:06 AM, Sven Kieske wrote:
>>
>>
>> On 04/11/14 02:43, Juan Carlos YJ. Lin wrote:
>>> Installed Ovirt 3.5 Hosted Engine,
>>> During first attemp fail network issue
>>> Durign second attemp, run ok, installs ans engine up
>>> But Default
On 11/04/2014 11:47 AM, Nikita Kodkani wrote:
It is designed in javascript/HTML. We had initially designed some
feature using CLI. But now we just want to execute command when we hit
the button/tab.
vojtech - sounds like ovirt.js could be the best fit here?
-Nikita
i
On Tue, Nov 4, 2014 a
It is designed in javascript/HTML. We had initially designed some feature
using CLI. But now we just want to execute command when we hit the
button/tab.
-Nikita
i
On Tue, Nov 4, 2014 at 4:09 PM, Itamar Heim wrote:
> On 11/04/2014 06:30 AM, Nikita Kodkani wrote:
>
>> Hi,
>>
>> I have the CLI d
Hi,
The patch has been merged to 3.5 and is not yet included at centos.
In the mean time you can do as root:
vdsm-tool sebool-config
Mooli.
- Original Message -
> Hi,
>
> Can someone post status on this one?
> https://bugzilla.redhat.com/show_bug.cgi?id=1157185
>
> I got into this on
On 11/04/2014 09:06 AM, Sven Kieske wrote:
On 04/11/14 02:43, Juan Carlos YJ. Lin wrote:
Installed Ovirt 3.5 Hosted Engine,
During first attemp fail network issue
Durign second attemp, run ok, installs ans engine up
But Default Cluster created withou CPU type and when Hosted Engine try to adop
On 11/04/2014 06:30 AM, Nikita Kodkani wrote:
Hi,
I have the CLI designed for the RHEV-M. I have also designed some GUI in
ovirt-engine.
Now I am stuckup with the integration. Could you suggest how to connect
the ovirt-engine GUI with the backend CLI commands?
which language is your gui?
why u
Hi,
I have the CLI designed for the RHEV-M. I have also designed some GUI in
ovirt-engine.
Now I am stuckup with the integration. Could you suggest how to connect the
ovirt-engine GUI with the backend CLI commands?
Thanks,
Nikita Kodkani
___
Users maili
Hi,
Can someone post status on this one?
https://bugzilla.redhat.com/show_bug.cgi?id=1157185
I got into this one in one of my hosts after upgrading to Centos 6.6 and
vdsm-4.16.7-1.gitdb83943.el6.x86_64
thanks
G
___
Users mailing list
Users@ovirt.org
I forgot to set the WWID-s to the original values (LUNs were clones) and tried
again, same result.
- Original Message -
> From: "Maor Lipchuk"
> To: "Raul Laansoo" , "Piotr Kliczewski"
>
> Cc: "users"
> Sent: Tuesday, 4 November, 2014 10:43:03 AM
> Subject: Re: [ovirt-users] Import FC
Progress. Now it does import/attach, but now VMs/disks are visible in storage
domain and error is logged:
2014-11-04 10:58:18,511 ERROR
[org.ovirt.engine.core.bll.GetUnregisteredDisksQuery] (ajp--127.0.0.1-8702-7)
[2bc90d28] Could not get populated disk, reason: null
Thank you.
Raul
- Or
- Original Message -
> From: "Sandro Bonazzola"
> To: "Itamar Heim" , "Giorgio Bersano"
>
> Cc: "users"
> Sent: Tuesday, November 4, 2014 9:43:18 AM
> Subject: Re: [ovirt-users] qemu-kvm from Jenkins - renamed packages to rhev?
>
> Il 03/11/2014 23:01, Itamar Heim ha scritto:
> > On
- Original Message -
> On Sun, Sep 14, 2014 at 03:17:39PM +0300, Itamar Heim wrote:
> > On 09/12/2014 03:22 PM, Itamar Heim wrote:
> > >With oVirt 3.5 nearing GA, time to ask for "what do you want to see in
> > >oVirt 3.6"?
> > >
> >
> > Even the short list of items mentions so far are big
I think I already saw this issue related to jsonRPC.
Pioter,
does the error at [1] looks familiar to you,
I remember that you worked on a bug which fixed an issue at the force detach?
Raul,
meanwhile can u please try to set the Host not to use json-RPC, and check if
that works for you.
do the fo
I have successfully installed my VM however suddenly when I log out
ovirt-engine then need to run again the VM and it give me error message
"Cannot run VM. Low disk space on target Storage Domain local_storage."
I am sure that I did not change any setting just run another one vm to try
it out...
On 04/11/14 02:43, Juan Carlos YJ. Lin wrote:
> Installed Ovirt 3.5 Hosted Engine,
> During first attemp fail network issue
> Durign second attemp, run ok, installs ans engine up
> But Default Cluster created withou CPU type and when Hosted Engine try to
> adopt the system fails
>
> Create
40 matches
Mail list logo