0] = m_axis_data_tvalid[1];
> assign s_axis_data_tlast[0] = m_axis_data_tlast[1];
> assign s_axis_data_tdata[31:0] = m_axis_data_tdata[63:32];
>
>
>
>
> - Original Message -
> Subject: Re: [USRP-users] RFNoC flowgraph runs right the second time
> Date: 7/25/18 10:42 a
Thanks Martin. I tried that, but it actually seems to be working when I look
at the results. I saw you post earlier to someone about changing UHD's logging
level. Is this something that can be done via a config file? I looked around,
but all I could find was some references to c++ usage.
> Ja
Jason,
this is a tough one. I have no ideas, other than 'throw in a couple of
ILAs and see where it's stuck'.
-- M
On 07/23/2018 12:03 PM, Jason Matusiak via USRP-users wrote:
> I have a flowgraph with a custom RFNoC block in the middle. That block
> has 2 inputs and 2 outputs. Just to get sta
I have a flowgraph with a custom RFNoC block in the middle. That block has 2
inputs and 2 outputs. Just to get started and work out the MIMO functionality,
all I do is cross the the inputs to the outputs (so input 0 comes out output 1).
What I am seeing is that if I run the flowgraph after lo