Re: Printing Page Subforms in Columns/Rows in v17
Miyako, Sorry for a bit of a rant at 4d... I suppose I'll try working with hundreds of form objects rather than 40 or 50 page forms... Should work but if there is something better using Load Form, etc, I'd love to hear more. Thanks again, Alan On Mon, Mar 4, 2019 at 9:06 PM Alan Tilson wrote: > Hello Miyako, > > That is shocking and undocumented as far as I can tell. And expensive for > us since we have invested quite a few hours into this approach. > > So is it possible to print a form full of page forms using FORM Load and > Print Object? If yes, is there an example somewhere? > > Thanks a bunch for letting me know but it is very strange to have such a > cool feature and not be able to print it! > > Cheers, Alan > > On Mon, Mar 4, 2019 at 4:28 PM Keisuke Miyako via 4D_Tech < > 4d_tech@lists.4d.com> wrote: > >> printing is not supported for page subforms. >> it's as simple as that. >> >> the only way to "print" a page subform is to FORM LOAD and Print object. >> >> I don't understand how 4D picks the table for the page subforms, but it >> uses the same output form as before! >> >> >> >> ** >> 4D Internet Users Group (4D iNUG) >> Archive: http://lists.4d.com/archives.html >> Options: https://lists.4d.com/mailman/options/4d_tech >> Unsub: mailto:4d_tech-unsubscr...@lists.4d.com >> ** > > ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
Hello Miyako, That is shocking and undocumented as far as I can tell. And expensive for us since we have invested quite a few hours into this approach. So is it possible to print a form full of page forms using FORM Load and Print Object? If yes, is there an example somewhere? Thanks a bunch for letting me know but it is very strange to have such a cool feature and not be able to print it! Cheers, Alan On Mon, Mar 4, 2019 at 4:28 PM Keisuke Miyako via 4D_Tech < 4d_tech@lists.4d.com> wrote: > printing is not supported for page subforms. > it's as simple as that. > > the only way to "print" a page subform is to FORM LOAD and Print object. > > I don't understand how 4D picks the table for the page subforms, but it > uses the same output form as before! > > > > ** > 4D Internet Users Group (4D iNUG) > Archive: http://lists.4d.com/archives.html > Options: https://lists.4d.com/mailman/options/4d_tech > Unsub: mailto:4d_tech-unsubscr...@lists.4d.com > ** ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
printing is not supported for page subforms. it's as simple as that. the only way to "print" a page subform is to FORM LOAD and Print object. I don't understand how 4D picks the table for the page subforms, but it uses the same output form as before! ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
Using print form the page forms don't print at all... On Mon, Mar 4, 2019 at 4:09 PM Alan Tilson wrote: > And I also tried moving the Page Subforms into the header, no change. > > On Mon, Mar 4, 2019 at 4:08 PM Alan Tilson wrote: > >> I created a new project form for the Page Subform and copied the objects >> into it. Same result. >> >> On Mon, Mar 4, 2019 at 3:51 PM Alan Tilson wrote: >> >>> I did try changing the Page Subform form to a project form, but the >>> results are the same. >>> >>> I don't understand how 4D picks the table for the page subforms, but it >>> uses the same output form as before! >>> >>> Ideas? >>> >>> Alan >>> >>> On Mon, Mar 4, 2019 at 3:25 PM Alan Tilson wrote: >>> Hello everyone, I'm creating a SPC inspection sheet for part dimensions and I'm using a page subform for each dimension. I loop through and set the subform object values and it looks ok on screen. However, when I print it the subform contest are replaced with the output form for the dimensions table. The page subforms are laid out in rows and columns, currently bassically 5x8. Is this not possible? Any ideas and/or suggestions would be appreciated! Alan Tilson >>> ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
And I also tried moving the Page Subforms into the header, no change. On Mon, Mar 4, 2019 at 4:08 PM Alan Tilson wrote: > I created a new project form for the Page Subform and copied the objects > into it. Same result. > > On Mon, Mar 4, 2019 at 3:51 PM Alan Tilson wrote: > >> I did try changing the Page Subform form to a project form, but the >> results are the same. >> >> I don't understand how 4D picks the table for the page subforms, but it >> uses the same output form as before! >> >> Ideas? >> >> Alan >> >> On Mon, Mar 4, 2019 at 3:25 PM Alan Tilson wrote: >> >>> Hello everyone, >>> >>> I'm creating a SPC inspection sheet for part dimensions and I'm using a >>> page subform for each dimension. I loop through and set the subform object >>> values and it looks ok on screen. However, when I print it the subform >>> contest are replaced with the output form for the dimensions table. >>> >>> The page subforms are laid out in rows and columns, currently bassically >>> 5x8. >>> >>> Is this not possible? >>> >>> Any ideas and/or suggestions would be appreciated! >>> Alan Tilson >>> >> ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
I created a new project form for the Page Subform and copied the objects into it. Same result. On Mon, Mar 4, 2019 at 3:51 PM Alan Tilson wrote: > I did try changing the Page Subform form to a project form, but the > results are the same. > > I don't understand how 4D picks the table for the page subforms, but it > uses the same output form as before! > > Ideas? > > Alan > > On Mon, Mar 4, 2019 at 3:25 PM Alan Tilson wrote: > >> Hello everyone, >> >> I'm creating a SPC inspection sheet for part dimensions and I'm using a >> page subform for each dimension. I loop through and set the subform object >> values and it looks ok on screen. However, when I print it the subform >> contest are replaced with the output form for the dimensions table. >> >> The page subforms are laid out in rows and columns, currently bassically >> 5x8. >> >> Is this not possible? >> >> Any ideas and/or suggestions would be appreciated! >> Alan Tilson >> > ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Re: Printing Page Subforms in Columns/Rows in v17
I did try changing the Page Subform form to a project form, but the results are the same. I don't understand how 4D picks the table for the page subforms, but it uses the same output form as before! Ideas? Alan On Mon, Mar 4, 2019 at 3:25 PM Alan Tilson wrote: > Hello everyone, > > I'm creating a SPC inspection sheet for part dimensions and I'm using a > page subform for each dimension. I loop through and set the subform object > values and it looks ok on screen. However, when I print it the subform > contest are replaced with the output form for the dimensions table. > > The page subforms are laid out in rows and columns, currently bassically > 5x8. > > Is this not possible? > > Any ideas and/or suggestions would be appreciated! > Alan Tilson > ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **
Printing Page Subforms in Columns/Rows in v17
Hello everyone, I'm creating a SPC inspection sheet for part dimensions and I'm using a page subform for each dimension. I loop through and set the subform object values and it looks ok on screen. However, when I print it the subform contest are replaced with the output form for the dimensions table. The page subforms are laid out in rows and columns, currently bassically 5x8. Is this not possible? Any ideas and/or suggestions would be appreciated! Alan Tilson ** 4D Internet Users Group (4D iNUG) Archive: http://lists.4d.com/archives.html Options: https://lists.4d.com/mailman/options/4d_tech Unsub: mailto:4d_tech-unsubscr...@lists.4d.com **