Re: Show Libr output
IBM 3590 Tape Drive and Medium Changer rmt5 Available 30-68-00-1,0 IBM 3590 Tape Drive and Medium Changer Original Message Subject: Re: Show Libr output Date: Sat, 11 May 2002 00:51:24 +0300 From: Zlatko Krastev [EMAIL PROTECTED] Reply-To: ADSM: Dist Stor Manager [EMAIL PROTECTED] To: [EMAIL PROTECTED] Mike, I suspect you have have upgraded the drives but did recreated all the rmtN devices (through rmdev -dl rmtN cfgmgr). I might be wrong as well. Still am trying to figure out what is wrong. Can you try something else - the output of lsattr -El rmt0 lsattr -El rmt2 (is there any difference) lslpp -L 'adsm* tivoli*' (or maybe even lslpp -L) lsdev -Cc tape Sorry for being so uninformed but I have no 3590E on hand. Anyway Richard's info is very different (goodness, why) !? BTW: you wrote AIX 4.3.1. Is this a typo or not? Which ML? Are you still on ADSM 3.1 as from your post in Feb? Zlatko Krastev IT Consultant P.S. This Rejected posting came from bounce back of my post at one of ADSM-L subscribers' mail server. No real need to reply both if happens again ,-) Zlatko To: Zlatko Krastev [EMAIL PROTECTED], [EMAIL PROTECTED] cc: Subject:Re: Show Libr output Zlatko, Here's the output you requested. As you can see, same model and microcode levels (it's the same across all five drives. I've done the same Show Libr on our other two servers, one with 3590B1A's, one with 3590E1A's. The B1A's: RMT0 (/dev/rmt0): type=8, mod=17, busy=0 online=1, The E1A's: (Sun server, others are AIX) RMT0 (/dev/rmt/3st): type=8, mod=48, busy=0, online=1, The problem we are having with the one drive is that some tapes that are written on it are not mounted on any other drives. When a session needs that tape and RMT2 is busy, the session immediately fails, the tape is not mounted. We have not removed the device and readded it through AIX, as we feel we may risk losing the ability to mount these tapes. But comparing the output from the Show Libr commands, is it possible that RMT2 is correct (it is the same as the 3590E1A's on the other server) and the other four drives are not (they are the same as the 3590B1A's on the other server)? Thanks, Mike $ lscfg -vl rmt0 DEVICELOCATION DESCRIPTION rmt0 30-60-00-0,0 IBM 3590 Tape Drive and Medium Changer ManufacturerIBM Machine Type and Model..03590E1A Serial Number...00026813 Device Specific.(FW)E35A Loadable Microcode LevelA0B00E26 $ lscfg -vl rmt2 DEVICELOCATION DESCRIPTION rmt2 10-78-00-2,0 IBM 3590 Tape Drive and Medium Changer ManufacturerIBM Machine Type and Model..03590E1A Serial Number...00026920 Device Specific.(FW)E35A Loadable Microcode LevelA0B00E26 Zlatko Krastev wrote: what is the output of lscfg -vl rmt0 lscfg -vl rmt2 Zlatko Krastev IT Consulant Please respond to [EMAIL PROTECTED] Sent by:ADSM: Dist Stor Manager [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject:Show Libr output In investigating a tape drive problem, I found the output from the Show Libr command to be interesting, specifically the type=8, mod=## fields: RMT2 (/dev/rmt2): type=8, mod=48, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2527744, isScsi=1 last dismounted volume RMT0 (/dev/rmt0): type=8, mod=17, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2523440, isScsi=1 last dismounted volume All five drives are 3590E1A's, four drives show type=8, mod=17, but RMT2 shows something different. This is the drive we are having problems with. Does anyone know what these fields mean, and what values mean what, under AIX 4.3.1? Thanks, Mike
Re: Show Libr output
I see different output. AIX 4.3.3, TSM 5.1. tsm: ORCAshow libr MMSV-libList: head=31573A28, tail=31574268 Library L3494 (type 349X): reference count = 0, online = 1, borrowed drives = 0, update count = 0 basicCfgBuilt = 1, libInfoBuild = 1, definingPathToLibrary = 0 addLibPath = 0, driveListBusy = 0 libvol_lock_id=0, libvolLock_count=0, SeqnBase=0 Library is shared. library extension at 31572A08 autochanger list: dev=/dev/lmcp0, busy=0, online=1 drive list: DRIVE_3590_D0: Device Class = 3590, RD Capabilities = 00F0, (3590E-C,3590E-B,3590C,3590B), WR Capabilities = 00C0, (3590E-C,3590E-B), Drive state: EMPTY, Drive Descriptor state = NO PENDING CHANGES, online = 1, polled = 0, Inquiry String = , Device Type From Inquiry =, allocated to (), volume owner is (), priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed = 0, update count = 0, checking = 0, offline time/date: 00:00:00 1900/00/00 349X-specific fields: devNo=12794240, isScsi=1 last dismounted volume Library L3583 (type SCSI): reference count = 2, online = 0, borrowed drives = 0, update count = 0 basicCfgBuilt = 1, libInfoBuild = 0, definingPathToLibrary = 0 addLibPath = 0, driveListBusy = 0 libvol_lock_id=0, libvolLock_count=0, SeqnBase=0 Library is shared. library extension at 31572BF8 autochanger list: dev=/dev/smc0, busy=1, online=1 drive list: DRIVE_3580_D0: Device Class = LTO, RD Capabilities = 0003, (ULTRIUMC,ULTRIUM), WR Capabilities = 0003, (ULTRIUMC,ULTRIUM), Drive state: UNKNOWN, Drive Descriptor state = NO PENDING CHANGES, online = 0, polled = 0, Inquiry String = , Device Type From Inquiry =, allocated to (), volume owner is (), priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed = 0, update count = 0, checking = 0, offline time/date: 00:00:00 1900/00/00 Clean Freq(GB)=-1, Bytes Proc(KB)=0, needsClean=0. SCSI-specific fields: None === AIX 4.3.3, TSM 4.2.1.9: tsm: ORCAshow libr MMSV-libList: head=326BF360, tail=326C1CF0 Library L3494 (type 349X): reference count = 0, online = 1, borrowed drives = 0, update count = 0 driveListBusy = 0 libvol_lock_id=0, libvolLock_count=0, SeqnBase=0 Library is shared. library extension at 326BE300 autochanger list: dev=/dev/lmcp0, busy=0, online=1 drive list: DRIVE_3590_D0: Device Class = 3590, RD Capabilities = 00F0, (3590E-C,3590E-B,3590C,3590B), WR Capabilities = 00C0, (3590E-C,3590E-B), Drive state: EMPTY, Drive Descriptor state = NO PENDING CHANGES, online = 1, polled = 0, allocated to (), volume owner is (), priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed = 0, update count = 0, checking = 0, offline time/date: 00:00:00 1900/00/00 349X-specific fields: devNo=12794240, isScsi=1 last dismounted volume Library L3583 (type SCSI): reference count = 0, online = 0, borrowed drives = 0, update count = 0 driveListBusy = 0 libvol_lock_id=0, libvolLock_count=0, SeqnBase=0 Library is shared. library extension at 326BE7A0 autochanger list: dev=/dev/smc0, busy=0, online=0 drive list: DRIVE_3580_D0: Device Class = LTO, RD Capabilities = 0003, (ULTRIUMC,ULTRIUM), WR Capabilities = 0003, (ULTRIUMC,ULTRIUM), Drive state: UNKNOWN, Drive Descriptor state = NO PENDING CHANGES, online = 0, polled = 0, allocated to (), volume owner is (), priorReadFailed = 0, priorWriteFailed = 0, priorLocateFailed = 0, update count = 0, checking = 0, offline time/date: 00:00:00 1900/00/00 Clean Freq(GB)=-1, Bytes Proc(KB)=0, needsClean=0. SCSI-specific fields: None
Re: Show Libr output
Mike, I suspect you have have upgraded the drives but did recreated all the rmtN devices (through rmdev -dl rmtN cfgmgr). I might be wrong as well. Still am trying to figure out what is wrong. Can you try something else - the output of lsattr -El rmt0 lsattr -El rmt2 (is there any difference) lslpp -L 'adsm* tivoli*' (or maybe even lslpp -L) lsdev -Cc tape Sorry for being so uninformed but I have no 3590E on hand. Anyway Richard's info is very different (goodness, why) !? BTW: you wrote AIX 4.3.1. Is this a typo or not? Which ML? Are you still on ADSM 3.1 as from your post in Feb? Zlatko Krastev IT Consultant P.S. This Rejected posting came from bounce back of my post at one of ADSM-L subscribers' mail server. No real need to reply both if happens again ,-) Zlatko To: Zlatko Krastev [EMAIL PROTECTED], [EMAIL PROTECTED] cc: Subject:Re: Show Libr output Zlatko, Here's the output you requested. As you can see, same model and microcode levels (it's the same across all five drives. I've done the same Show Libr on our other two servers, one with 3590B1A's, one with 3590E1A's. The B1A's: RMT0 (/dev/rmt0): type=8, mod=17, busy=0 online=1, The E1A's: (Sun server, others are AIX) RMT0 (/dev/rmt/3st): type=8, mod=48, busy=0, online=1, The problem we are having with the one drive is that some tapes that are written on it are not mounted on any other drives. When a session needs that tape and RMT2 is busy, the session immediately fails, the tape is not mounted. We have not removed the device and readded it through AIX, as we feel we may risk losing the ability to mount these tapes. But comparing the output from the Show Libr commands, is it possible that RMT2 is correct (it is the same as the 3590E1A's on the other server) and the other four drives are not (they are the same as the 3590B1A's on the other server)? Thanks, Mike $ lscfg -vl rmt0 DEVICELOCATION DESCRIPTION rmt0 30-60-00-0,0 IBM 3590 Tape Drive and Medium Changer ManufacturerIBM Machine Type and Model..03590E1A Serial Number...00026813 Device Specific.(FW)E35A Loadable Microcode LevelA0B00E26 $ lscfg -vl rmt2 DEVICELOCATION DESCRIPTION rmt2 10-78-00-2,0 IBM 3590 Tape Drive and Medium Changer ManufacturerIBM Machine Type and Model..03590E1A Serial Number...00026920 Device Specific.(FW)E35A Loadable Microcode LevelA0B00E26 Zlatko Krastev wrote: what is the output of lscfg -vl rmt0 lscfg -vl rmt2 Zlatko Krastev IT Consulant Please respond to [EMAIL PROTECTED] Sent by:ADSM: Dist Stor Manager [EMAIL PROTECTED] To: [EMAIL PROTECTED] cc: Subject:Show Libr output In investigating a tape drive problem, I found the output from the Show Libr command to be interesting, specifically the type=8, mod=## fields: RMT2 (/dev/rmt2): type=8, mod=48, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2527744, isScsi=1 last dismounted volume RMT0 (/dev/rmt0): type=8, mod=17, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2523440, isScsi=1 last dismounted volume All five drives are 3590E1A's, four drives show type=8, mod=17, but RMT2 shows something different. This is the drive we are having problems with. Does anyone know what these fields mean, and what values mean what, under AIX 4.3.1? Thanks, Mike
Show Libr output
In investigating a tape drive problem, I found the output from the Show Libr command to be interesting, specifically the type=8, mod=## fields: RMT2 (/dev/rmt2): type=8, mod=48, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2527744, isScsi=1 last dismounted volume RMT0 (/dev/rmt0): type=8, mod=17, busy=1, online=1, polled=0, available=1, createPending=0 priorReadFailed=0, priorWriteFailed=0 priorLocateFailed=0, update=0, checking=0, offline time/date: 00:00:00 1900/00/00 Log sense counters last dismount: 349X-specific fields: devNo=2523440, isScsi=1 last dismounted volume All five drives are 3590E1A's, four drives show type=8, mod=17, but RMT2 shows something different. This is the drive we are having problems with. Does anyone know what these fields mean, and what values mean what, under AIX 4.3.1? Thanks, Mike