Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Mathew Howard]

The 900mhz PTP is definitely SM hardware.
Apparently I was wrong about them supporting sync over power... looks like
you would indeed need a timing port device. But in that case, any old sync
pipe should work, shouldn't it?

http://community.cambiumnetworks.com/t5/Sub-6-GHz/PTP450-900-BHM-Sync-Options/td-p/74379

I suspect we are actually talking about a PMP AP though, so we'd need to
clarify that

On Thu, Jun 18, 2020 at 8:53 PM Forrest Christian (List Account) <
li...@packetflux.com> wrote:

> I see that everyone else is as confused as I am about some of these PTP
> Radios.
>
> I'm about 100% certain that the 900Mhz PTP is be the AP hardware, in which
> case it should support any timing method you throw at it:  Canopy sync,
> cambium sync, or aux port sync.
>
> For a single radio,the Syncbox Aux Port is probably the least expensive
> option, although I personally would throw the combination of a syncbox
> basic, sitemonitor base 3, and powerinjector+canopy sync at it as that will
> allow you to power and control any other radios at the site and gain
> temperature and telemetry for the site.
>
> On the syncbox only option, The Syncbox Aux Port get's its power from the
> radio, just turn on uGPS power in the AP, and run a cat5 from the aux port
> to this unit.
>
> If this isn't based on the AP hardware, then we need to go to plan B,
> which will probably be a timing port device, but I'll need to research more.
>
> On Thu, Jun 18, 2020 at 12:30 PM  wrote:
>
>> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
>> recommendation for which PacketFlux injector to use?
>>
>> [I have some old syncpipes, but they are not new enough.]
>>
>> Thank you, Chris
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
>
> --
> - Forrest
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Forrest Christian (List Account)]

I see that everyone else is as confused as I am about some of these PTP
Radios.

I'm about 100% certain that the 900Mhz PTP is be the AP hardware, in which
case it should support any timing method you throw at it:  Canopy sync,
cambium sync, or aux port sync.

For a single radio,the Syncbox Aux Port is probably the least expensive
option, although I personally would throw the combination of a syncbox
basic, sitemonitor base 3, and powerinjector+canopy sync at it as that will
allow you to power and control any other radios at the site and gain
temperature and telemetry for the site.

On the syncbox only option, The Syncbox Aux Port get's its power from the
radio, just turn on uGPS power in the AP, and run a cat5 from the aux port
to this unit.

If this isn't based on the AP hardware, then we need to go to plan B, which
will probably be a timing port device, but I'll need to research more.

On Thu, Jun 18, 2020 at 12:30 PM  wrote:

> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>


-- 
- Forrest
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Mathew Howard]

I'm fairly certain the PTP version has sync ability, but I don't remember
what sync sources work with it... it seems to me that it only worked with
sync over power. I checked into it at one point because we were putting in
a PTP450i 900mhz link, but I never actually bothered trying to use sync
because it wasn't close enough to any of our 900mhz APs for me to care.

On Thu, Jun 18, 2020 at 4:54 PM Ken Hohhof  wrote:

> I also missed that.
>
>
>
> I’m not sure the PTP version even has sync capability, you’d have to check
> the spec sheet or user manual.  I wouldn’t use 900 MHz for backhaul so I am
> not familiar with the product, other than as you say, it’s the SM hardware
> (and therefore I assume needs 24V power).
>
>
>
> *From:* AF  *On Behalf Of *Mathew Howard
> *Sent:* Thursday, June 18, 2020 4:32 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Oh, wait... I just realized he said *PTP* 450i... if that's the case, that
> changes things (that would be the same hardware, physically, as the 900mhz
> 450i SM). The 900mhz PMP450i SM does have the old 6 pin connector on it,
> but I don't remember if that's usable for sync or not.. you might need sync
> over power.
>
>
>
> If it is actually a PMP450i AP, then yeah, the simplest thing for a single
> AP is to just get the AUX port Syncbox Junior and be done with it.
>
>
>
>
>
> On Thu, Jun 18, 2020 at 4:21 PM Ken Hohhof  wrote:
>
> AUX port is RJ45.  Apparently you can make a 6pin to 8pin adapter cable
> following instructions in the Cambium documentation, to convert from timing
> port to AUX port.
>
>
>
> Syncpipes have been EOL for awhile, so I forget how many versions there
> were.  I know there was a BASIC and a PARASITIC.  I don’t remember if there
> was a version that could be powered directly from a timing/UGPS/AUX port.
>
>
>
> Personally, I’d spend the $130 and get the new version.  Or if it’s a
> SyncPipe BASIC, buy a PowerInjector+CambiumSync.
>
>
>
>
>
> *From:* AF  *On Behalf Of *Steve Jones
> *Sent:* Thursday, June 18, 2020 3:46 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Is the aux port sync the old input? Can he just hang his old syncpipe off
> that directly
>
>
>
> On Thu, Jun 18, 2020, 3:41 PM Ken Hohhof  wrote:
>
> I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox
> Junior AUX port version.
>
> https://store.packetflux.com/syncbox-junior-aux-port-version/
>
>
>
>
>
> *From:* AF  *On Behalf Of *
> cg...@graytechsoftware.com
> *Sent:* Thursday, June 18, 2020 2:17 PM
> *To:* 'AnimalFarm Microwave Users Group' 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Thank you. This is a small site with a handful of customers… and I only
> need sync on this one radio. Will any of the smaller units work?
>
>
>
> *From:* AF  *On Behalf Of *Ryan Ray
> *Sent:* Thursday, June 18, 2020 2:55 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
>
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ken Hohhof]

I also missed that.

 

I’m not sure the PTP version even has sync capability, you’d have to check the 
spec sheet or user manual.  I wouldn’t use 900 MHz for backhaul so I am not 
familiar with the product, other than as you say, it’s the SM hardware (and 
therefore I assume needs 24V power).

 

From: AF  On Behalf Of Mathew Howard
Sent: Thursday, June 18, 2020 4:32 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Oh, wait... I just realized he said *PTP* 450i... if that's the case, that 
changes things (that would be the same hardware, physically, as the 900mhz 450i 
SM). The 900mhz PMP450i SM does have the old 6 pin connector on it, but I don't 
remember if that's usable for sync or not.. you might need sync over power.

 

If it is actually a PMP450i AP, then yeah, the simplest thing for a single AP 
is to just get the AUX port Syncbox Junior and be done with it. 

 

 

On Thu, Jun 18, 2020 at 4:21 PM Ken Hohhof mailto:af...@kwisp.com> > wrote:

AUX port is RJ45.  Apparently you can make a 6pin to 8pin adapter cable 
following instructions in the Cambium documentation, to convert from timing 
port to AUX port.

 

Syncpipes have been EOL for awhile, so I forget how many versions there were.  
I know there was a BASIC and a PARASITIC.  I don’t remember if there was a 
version that could be powered directly from a timing/UGPS/AUX port.

 

Personally, I’d spend the $130 and get the new version.  Or if it’s a SyncPipe 
BASIC, buy a PowerInjector+CambiumSync.

 

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of Steve Jones
Sent: Thursday, June 18, 2020 3:46 PM
To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Is the aux port sync the old input? Can he just hang his old syncpipe off that 
directly

 

On Thu, Jun 18, 2020, 3:41 PM Ken Hohhof mailto:af...@kwisp.com> > wrote:

I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox Junior 
AUX port version.

https://store.packetflux.com/syncbox-junior-aux-port-version/

 

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of cg...@graytechsoftware.com  
Sent: Thursday, June 18, 2020 2:17 PM
To: 'AnimalFarm Microwave Users Group' mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Thank you. This is a small site with a handful of customers… and I only need 
sync on this one radio. Will any of the smaller units work?

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of Ryan Ray
Sent: Thursday, June 18, 2020 2:55 PM
To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Rackinjector you use the Power Injection for Cambium Sync Board cards. For a 
powerinjector you use the Powerinjector Plus Cambium-Style

 

On Thu, Jun 18, 2020 at 11:30 AM mailto:cg...@graytechsoftware.com> > wrote:

I have a site where I need sync only for a PTP 450i 900 MHz AP. Any 
recommendation for which PacketFlux injector to use? 

[I have some old syncpipes, but they are not new enough.]

Thank you, Chris

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Mathew Howard]

Oh, wait... I just realized he said *PTP* 450i... if that's the case, that
changes things (that would be the same hardware, physically, as the 900mhz
450i SM). The 900mhz PMP450i SM does have the old 6 pin connector on it,
but I don't remember if that's usable for sync or not.. you might need sync
over power.

If it is actually a PMP450i AP, then yeah, the simplest thing for a single
AP is to just get the AUX port Syncbox Junior and be done with it.


On Thu, Jun 18, 2020 at 4:21 PM Ken Hohhof  wrote:

> AUX port is RJ45.  Apparently you can make a 6pin to 8pin adapter cable
> following instructions in the Cambium documentation, to convert from timing
> port to AUX port.
>
>
>
> Syncpipes have been EOL for awhile, so I forget how many versions there
> were.  I know there was a BASIC and a PARASITIC.  I don’t remember if there
> was a version that could be powered directly from a timing/UGPS/AUX port.
>
>
>
> Personally, I’d spend the $130 and get the new version.  Or if it’s a
> SyncPipe BASIC, buy a PowerInjector+CambiumSync.
>
>
>
>
>
> *From:* AF  *On Behalf Of *Steve Jones
> *Sent:* Thursday, June 18, 2020 3:46 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Is the aux port sync the old input? Can he just hang his old syncpipe off
> that directly
>
>
>
> On Thu, Jun 18, 2020, 3:41 PM Ken Hohhof  wrote:
>
> I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox
> Junior AUX port version.
>
> https://store.packetflux.com/syncbox-junior-aux-port-version/
>
>
>
>
>
> *From:* AF  *On Behalf Of *
> cg...@graytechsoftware.com
> *Sent:* Thursday, June 18, 2020 2:17 PM
> *To:* 'AnimalFarm Microwave Users Group' 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Thank you. This is a small site with a handful of customers… and I only
> need sync on this one radio. Will any of the smaller units work?
>
>
>
> *From:* AF  *On Behalf Of *Ryan Ray
> *Sent:* Thursday, June 18, 2020 2:55 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
>
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ken Hohhof]

AUX port is RJ45.  Apparently you can make a 6pin to 8pin adapter cable 
following instructions in the Cambium documentation, to convert from timing 
port to AUX port.

 

Syncpipes have been EOL for awhile, so I forget how many versions there were.  
I know there was a BASIC and a PARASITIC.  I don’t remember if there was a 
version that could be powered directly from a timing/UGPS/AUX port.

 

Personally, I’d spend the $130 and get the new version.  Or if it’s a SyncPipe 
BASIC, buy a PowerInjector+CambiumSync.

 

 

From: AF  On Behalf Of Steve Jones
Sent: Thursday, June 18, 2020 3:46 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Is the aux port sync the old input? Can he just hang his old syncpipe off that 
directly

 

On Thu, Jun 18, 2020, 3:41 PM Ken Hohhof mailto:af...@kwisp.com> > wrote:

I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox Junior 
AUX port version.

https://store.packetflux.com/syncbox-junior-aux-port-version/

 

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of cg...@graytechsoftware.com  
Sent: Thursday, June 18, 2020 2:17 PM
To: 'AnimalFarm Microwave Users Group' mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Thank you. This is a small site with a handful of customers… and I only need 
sync on this one radio. Will any of the smaller units work?

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of Ryan Ray
Sent: Thursday, June 18, 2020 2:55 PM
To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Rackinjector you use the Power Injection for Cambium Sync Board cards. For a 
powerinjector you use the Powerinjector Plus Cambium-Style

 

On Thu, Jun 18, 2020 at 11:30 AM mailto:cg...@graytechsoftware.com> > wrote:

I have a site where I need sync only for a PTP 450i 900 MHz AP. Any 
recommendation for which PacketFlux injector to use? 

[I have some old syncpipes, but they are not new enough.]

Thank you, Chris

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Mathew Howard]

Yeah, it has the aux port. I'm pretty sure we have at least one of those
that's setup that way.

It seems to me that you can use the aux port like the old sync port, if you
make the proper cable... but I could be remembering wrong.

On Thu, Jun 18, 2020 at 3:41 PM Ken Hohhof  wrote:

> I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox
> Junior AUX port version.
>
> https://store.packetflux.com/syncbox-junior-aux-port-version/
>
>
>
>
>
> *From:* AF  *On Behalf Of *
> cg...@graytechsoftware.com
> *Sent:* Thursday, June 18, 2020 2:17 PM
> *To:* 'AnimalFarm Microwave Users Group' 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Thank you. This is a small site with a handful of customers… and I only
> need sync on this one radio. Will any of the smaller units work?
>
>
>
> *From:* AF  *On Behalf Of *Ryan Ray
> *Sent:* Thursday, June 18, 2020 2:55 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
>
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Steve Jones]

Is the aux port sync the old input? Can he just hang his old syncpipe off
that directly

On Thu, Jun 18, 2020, 3:41 PM Ken Hohhof  wrote:

> I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox
> Junior AUX port version.
>
> https://store.packetflux.com/syncbox-junior-aux-port-version/
>
>
>
>
>
> *From:* AF  *On Behalf Of *
> cg...@graytechsoftware.com
> *Sent:* Thursday, June 18, 2020 2:17 PM
> *To:* 'AnimalFarm Microwave Users Group' 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Thank you. This is a small site with a handful of customers… and I only
> need sync on this one radio. Will any of the smaller units work?
>
>
>
> *From:* AF  *On Behalf Of *Ryan Ray
> *Sent:* Thursday, June 18, 2020 2:55 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
>
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ken Hohhof]

I think that AP has an AUX port, doesn’t it?  So you could use a Syncbox Junior 
AUX port version.

https://store.packetflux.com/syncbox-junior-aux-port-version/

 

 

From: AF  On Behalf Of cg...@graytechsoftware.com
Sent: Thursday, June 18, 2020 2:17 PM
To: 'AnimalFarm Microwave Users Group' 
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Thank you. This is a small site with a handful of customers… and I only need 
sync on this one radio. Will any of the smaller units work?

 

From: AF mailto:af-boun...@af.afmug.com> > On Behalf 
Of Ryan Ray
Sent: Thursday, June 18, 2020 2:55 PM
To: AnimalFarm Microwave Users Group mailto:af@af.afmug.com> >
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Rackinjector you use the Power Injection for Cambium Sync Board cards. For a 
powerinjector you use the Powerinjector Plus Cambium-Style

 

On Thu, Jun 18, 2020 at 11:30 AM mailto:cg...@graytechsoftware.com> > wrote:

I have a site where I need sync only for a PTP 450i 900 MHz AP. Any 
recommendation for which PacketFlux injector to use? 

[I have some old syncpipes, but they are not new enough.]

Thank you, Chris

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ryan Ray]

Yep

On Thu, Jun 18, 2020 at 12:17 PM  wrote:

> Thank you. This is a small site with a handful of customers… and I only
> need sync on this one radio. Will any of the smaller units work?
>
>
>
> *From:* AF  *On Behalf Of *Ryan Ray
> *Sent:* Thursday, June 18, 2020 2:55 PM
> *To:* AnimalFarm Microwave Users Group 
> *Subject:* Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?
>
>
>
> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
>
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[cgray]

Thank you. This is a small site with a handful of customers… and I only need 
sync on this one radio. Will any of the smaller units work?

 

From: AF  On Behalf Of Ryan Ray
Sent: Thursday, June 18, 2020 2:55 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

 

Rackinjector you use the Power Injection for Cambium Sync Board cards. For a 
powerinjector you use the Powerinjector Plus Cambium-Style

 

On Thu, Jun 18, 2020 at 11:30 AM mailto:cg...@graytechsoftware.com> > wrote:

I have a site where I need sync only for a PTP 450i 900 MHz AP. Any 
recommendation for which PacketFlux injector to use? 

[I have some old syncpipes, but they are not new enough.]

Thank you, Chris

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ryan Ray]

https://store.packetflux.com/powerinjector-plus-cambium-style-sync/

https://store.packetflux.com/packetflux-rackinjector/

https://store.packetflux.com/rackinjector-injection-card-for-cambium-sync/



On Thu, Jun 18, 2020 at 11:55 AM Ryan Ray  wrote:

> Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
> For a powerinjector you use the *Powerinjector Plus Cambium-Style*
>
> On Thu, Jun 18, 2020 at 11:30 AM  wrote:
>
>> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
>> recommendation for which PacketFlux injector to use?
>>
>> [I have some old syncpipes, but they are not new enough.]
>>
>> Thank you, Chris
>> --
>> AF mailing list
>> AF@af.afmug.com
>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[Ryan Ray]

Rackinjector you use the *Power Injection for Cambium Sync Board* cards.
For a powerinjector you use the *Powerinjector Plus Cambium-Style*

On Thu, Jun 18, 2020 at 11:30 AM  wrote:

> I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
> recommendation for which PacketFlux injector to use?
>
> [I have some old syncpipes, but they are not new enough.]
>
> Thank you, Chris
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] PacketFlux Sync for PTP 450i 900 MHz?

[cgray]

I have a site where I need sync only for a PTP 450i 900 MHz AP. Any
recommendation for which PacketFlux injector to use? 

[I have some old syncpipes, but they are not new enough.]

Thank you, Chris

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] ePMP and 450 co-sync

[Josh Luthman]

No one has said they have issues I don't believe.  Just sync up your
settings and you're good to go.  Need to make sure you have certain
versions+ to gain compatibility.

Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373


On Thu, Jun 18, 2020 at 11:54 AM Kurt Fankhauser 
wrote:

> How well is the sync working between ePMP and PMP450 platforms for
> co-locating equipment? I see Cambium has a co-location tool on their
> website but looking for some real world feedback, thanks
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] ePMP and 450 co-sync

[Kurt Fankhauser]

How well is the sync working between ePMP and PMP450 platforms for
co-locating equipment? I see Cambium has a co-location tool on their
website but looking for some real world feedback, thanks
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com