Re: [AFMUG] Verizon GUDP
Will they transfer? Most everything like that when touched will convert On Sun, Jan 24, 2021, 9:57 AM Matt Hoppes wrote: > I have 3 Verizon grandfathered unlimited data plans. > > We are only using 1. > > Anyone here interested in one before I cancel them? > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT: Today's poor kids and streaming video
I like Plex as well. A lot of the streaming services are solely focused on keeping you focused in so you watch more. On Sun, Jan 24, 2021 at 3:11 PM Zach Underwood wrote: > I think Plex handle this really well. When you pause something it will > freeze the screen when some a button bar on the lower 1/3 then after a few > sec the button bar goes away. Then if you press down button will bring up a > screen overlay that will have cast info and description info. > > On Sun, Jan 24, 2021, 6:03 PM Chuck McCown via AF wrote: > >> I think it was the second star wars movie. Princess Leia was a prisoner >> of >> the big fat things. I was pretty sure I saw a nipple when she was >> struggling. Later we rented the VHS and I stepped through it. Pretty >> sure >> there was a nipple there. >> >> -Original Message- >> From: Nate Burke >> Sent: Sunday, January 24, 2021 3:53 PM >> To: Animal Farm >> Subject: [AFMUG] OT: Today's poor kids and streaming video >> >> Am I the only one that's annoyed when you pause a video stream, they dim >> the screen and pop up other information. How are you supposed to pause >> for the juicy bits? And what about stepping through a scene frame by >> frame? Today's poor kids probably have no concept of stepping through >> frame by frame.I mean at least the 2000's kids could pause the clear >> frame on the DVD and not having all the VHS tracking lines on the screen >> like I grew up with. >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT before and after
Yeah, we rod the cylinders normally. That takes times. 25 tamps at three different levels. 30 raps with a mallet etc. The spec shows we can also just vibrate them. So we put them all on a shake table this time. Much quicker. Inside the broken cylinders they were pretty solid and homogeneous. From: Bill Prince Sent: Sunday, January 24, 2021 4:03 PM To: af@af.afmug.com Subject: Re: [AFMUG] OT before and after You might have gotten higher load of there were fewer voids. I noticed a few voids in the "before" picture, and that is only on the surface. bp On 1/24/2021 3:01 PM, Chuck McCown via AF wrote: The concrete strength ranged between 1200 and 2000 psi. I tested 8 cylinders of two ages and 4 mixes today. Shooting for 1500 to 1650 psi. So I think I have it bracketed. Turns out the fancy additives we tried were no better than simple calcium chloride. From: Jaime Solorza Sent: Sunday, January 24, 2021 3:50 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT before and after How much psi? On Sun, Jan 24, 2021, 3:29 PM Chuck McCown via AF wrote: Cylinder test day Sent from my iPhone -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT before and after
Yes, it is filling a microtrench slot for Google Fiber. This is actually strong compared to other jurisdictions. SLC wants 500 psi and UDOT wants no more than 150 psi. From: Zach Underwood Sent: Sunday, January 24, 2021 4:07 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT before and after What is the reason for wanting such a low psi rating? It is to make it easier to remove in the future? On Sun, Jan 24, 2021, 6:02 PM Chuck McCown via AF wrote: The concrete strength ranged between 1200 and 2000 psi. I tested 8 cylinders of two ages and 4 mixes today. Shooting for 1500 to 1650 psi. So I think I have it bracketed. Turns out the fancy additives we tried were no better than simple calcium chloride. From: Jaime Solorza Sent: Sunday, January 24, 2021 3:50 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT before and after How much psi? On Sun, Jan 24, 2021, 3:29 PM Chuck McCown via AF wrote: Cylinder test day Sent from my iPhone -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT: Today's poor kids and streaming video
I think Plex handle this really well. When you pause something it will freeze the screen when some a button bar on the lower 1/3 then after a few sec the button bar goes away. Then if you press down button will bring up a screen overlay that will have cast info and description info. On Sun, Jan 24, 2021, 6:03 PM Chuck McCown via AF wrote: > I think it was the second star wars movie. Princess Leia was a prisoner > of > the big fat things. I was pretty sure I saw a nipple when she was > struggling. Later we rented the VHS and I stepped through it. Pretty > sure > there was a nipple there. > > -Original Message- > From: Nate Burke > Sent: Sunday, January 24, 2021 3:53 PM > To: Animal Farm > Subject: [AFMUG] OT: Today's poor kids and streaming video > > Am I the only one that's annoyed when you pause a video stream, they dim > the screen and pop up other information. How are you supposed to pause > for the juicy bits? And what about stepping through a scene frame by > frame? Today's poor kids probably have no concept of stepping through > frame by frame.I mean at least the 2000's kids could pause the clear > frame on the DVD and not having all the VHS tracking lines on the screen > like I grew up with. > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT before and after
What is the reason for wanting such a low psi rating? It is to make it easier to remove in the future? On Sun, Jan 24, 2021, 6:02 PM Chuck McCown via AF wrote: > The concrete strength ranged between 1200 and 2000 psi. I tested 8 > cylinders of two ages and 4 mixes today. > Shooting for 1500 to 1650 psi. So I think I have it bracketed. > > Turns out the fancy additives we tried were no better than simple calcium > chloride. > > *From:* Jaime Solorza > *Sent:* Sunday, January 24, 2021 3:50 PM > *To:* AnimalFarm Microwave Users Group > *Subject:* Re: [AFMUG] OT before and after > > How much psi? > > On Sun, Jan 24, 2021, 3:29 PM Chuck McCown via AF wrote: > >> Cylinder test day >> >> >> >> >> >> Sent from my iPhone >> -- >> AF mailing list >> AF@af.afmug.com >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> > -- > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT before and after
You might have gotten higher load of there were fewer voids. I noticed a few voids in the "before" picture, and that is only on the surface. bp On 1/24/2021 3:01 PM, Chuck McCown via AF wrote: The concrete strength ranged between 1200 and 2000 psi. I tested 8 cylinders of two ages and 4 mixes today. Shooting for 1500 to 1650 psi. So I think I have it bracketed. Turns out the fancy additives we tried were no better than simple calcium chloride. From: Jaime Solorza Sent: Sunday, January 24, 2021 3:50 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT before and after How much psi? On Sun, Jan 24, 2021, 3:29 PM Chuck McCown via AFwrote: Cylinder test day Sent from my iPhone -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT: Today's poor kids and streaming video
I think it was the second star wars movie. Princess Leia was a prisoner of the big fat things. I was pretty sure I saw a nipple when she was struggling. Later we rented the VHS and I stepped through it. Pretty sure there was a nipple there. -Original Message- From: Nate Burke Sent: Sunday, January 24, 2021 3:53 PM To: Animal Farm Subject: [AFMUG] OT: Today's poor kids and streaming video Am I the only one that's annoyed when you pause a video stream, they dim the screen and pop up other information. How are you supposed to pause for the juicy bits? And what about stepping through a scene frame by frame? Today's poor kids probably have no concept of stepping through frame by frame.I mean at least the 2000's kids could pause the clear frame on the DVD and not having all the VHS tracking lines on the screen like I grew up with. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT: Today's poor kids and streaming video
That pisses me off so much I could spit. We often notice little tidbits; we go back and stop at the time, but we can't see what we're looking for b/c the screen is cluttered with all sorts of other stuff overlayiong what we're trying to look closer at. Are you and us the only ones this ticks off? No! Please say no! bp On 1/24/2021 2:53 PM, Nate Burke wrote: Am I the only one that's annoyed when you pause a video stream, they dim the screen and pop up other information. How are you supposed to pause for the juicy bits? And what about stepping through a scene frame by frame? Today's poor kids probably have no concept of stepping through frame by frame. I mean at least the 2000's kids could pause the clear frame on the DVD and not having all the VHS tracking lines on the screen like I grew up with. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT before and after
The concrete strength ranged between 1200 and 2000 psi. I tested 8 cylinders of two ages and 4 mixes today. Shooting for 1500 to 1650 psi. So I think I have it bracketed. Turns out the fancy additives we tried were no better than simple calcium chloride. From: Jaime Solorza Sent: Sunday, January 24, 2021 3:50 PM To: AnimalFarm Microwave Users Group Subject: Re: [AFMUG] OT before and after How much psi? On Sun, Jan 24, 2021, 3:29 PM Chuck McCown via AF wrote: Cylinder test day Sent from my iPhone -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
Re: [AFMUG] OT: Today's poor kids and streaming video
People stream? My homeowners insurance just denied covering our VHS/DVD/TV combo which damaged in a power surge due to it being an antique. :( > On Jan 24, 2021, at 5:55 PM, Nate Burke wrote: > > Am I the only one that's annoyed when you pause a video stream, they dim the > screen and pop up other information. How are you supposed to pause for the > juicy bits? And what about stepping through a scene frame by frame? Today's > poor kids probably have no concept of stepping through frame by frame.I > mean at least the 2000's kids could pause the clear frame on the DVD and not > having all the VHS tracking lines on the screen like I grew up with. > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] OT: Today's poor kids and streaming video
Am I the only one that's annoyed when you pause a video stream, they dim the screen and pop up other information. How are you supposed to pause for the juicy bits? And what about stepping through a scene frame by frame? Today's poor kids probably have no concept of stepping through frame by frame.I mean at least the 2000's kids could pause the clear frame on the DVD and not having all the VHS tracking lines on the screen like I grew up with. -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
[AFMUG] Verizon GUDP
I have 3 Verizon grandfathered unlimited data plans. We are only using 1. Anyone here interested in one before I cancel them? -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com