Re: [AFMUG] Cambium 13.4
I've seen the 'Reg Bug' as we have come to call it on PMP100 equipment using RADIUS on v13.1.3, and possibly a few times on the short time that we had equipment on v12.1. It wasn't ever noticed on v11.2 for us. I can't speak on PMP450, we don't have enough of it deployed to have noticed it yet. This was a known problem in previous release notes though - On rare occasion, when using RADIUS, SMs may go into “Registering” state and does not pass traffic. Proxy access to the SM is still available. Workaround is to drop the session and allow the SM to re-register or disable RADIUS altogether. I don't remember seeing in the notes where this was stated as fixed, but I also don't remember seeing it mentioned as a 'still known problem or limitation'. Date: Sun, 19 Jul 2015 02:13:10 + From: mhopk...@onlinenw.com To: af@afmug.com Subject: Re: [AFMUG] Cambium 13.4 Yes we use radius. On Jul 17, 2015 7:38 PM, Mark Radabaugh m...@amplex.net wrote: Do you use RADIUS?I have seen that before with RADIUS but have not seen it to date on the 13.4 units we are running, but we don’t run RADIUS authentication currently Mark On Jul 17, 2015, at 8:10 PM, Matt Hopkins mhopk...@onlinenw.com wrote: This was not a browser cache issue. The APs that had the Registering issue had anywhere from 9-65 SMs. Cambium support advised me to downgrade to 13.2.1 and said that it was a known issue. Matt HopkinsOnlineNW support503.687.1030supp...@onlinenw.com onlinenw.com On 7/17/2015 4:34 PM, George Skorup wrote: Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt HopkinsNetwork Administrator 503.687.1030supp...@onlinenw.com onlinenw.com
Re: [AFMUG] Cambium 13.4
Yes we use radius. On Jul 17, 2015 7:38 PM, Mark Radabaugh m...@amplex.net wrote: Do you use RADIUS?I have seen that before with RADIUS but have not seen it to date on the 13.4 units we are running, but we don’t run RADIUS authentication currently Mark On Jul 17, 2015, at 8:10 PM, Matt Hopkins mhopk...@onlinenw.com wrote: This was not a browser cache issue. The APs that had the Registering issue had anywhere from 9-65 SMs. Cambium support advised me to downgrade to 13.2.1 and said that it was a known issue. Matt Hopkins OnlineNW Support 503.687.1030 supp...@onlinenw.com http://onlinenw.com/ onlinenw.com On 7/17/2015 4:34 PM, George Skorup wrote: Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com http://onlinenw.com/ onlinenw.com
Re: [AFMUG] Cambium 13.4
Do you use RADIUS?I have seen that before with RADIUS but have not seen it to date on the 13.4 units we are running, but we don’t run RADIUS authentication currently Mark On Jul 17, 2015, at 8:10 PM, Matt Hopkins mhopk...@onlinenw.com wrote: This was not a browser cache issue. The APs that had the Registering issue had anywhere from 9-65 SMs. Cambium support advised me to downgrade to 13.2.1 and said that it was a known issue. Matt Hopkins OnlineNW Support 503.687.1030 supp...@onlinenw.com mailto:supp...@onlinenw.com http://onlinenw.com/onlinenw.com http://onlinenw.com/ On 7/17/2015 4:34 PM, George Skorup wrote: Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com mailto:supp...@onlinenw.com http://onlinenw.com/onlinenw.com http://onlinenw.com/
Re: [AFMUG] Cambium 13.4
I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com http://onlinenw.com onlinenw.com http://onlinenw.com
[AFMUG] Cambium 13.4
I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com http://onlinenw.com onlinenw.com http://onlinenw.com
Re: [AFMUG] Cambium 13.4
Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com http://onlinenw.com onlinenw.com http://onlinenw.com
Re: [AFMUG] Cambium 13.4
This was not a browser cache issue. The APs that had the Registering issue had anywhere from 9-65 SMs. Cambium support advised me to downgrade to 13.2.1 and said that it was a known issue. Matt Hopkins OnlineNW Support 503.687.1030 supp...@onlinenw.com http://onlinenw.com onlinenw.com http://onlinenw.com On 7/17/2015 4:34 PM, George Skorup wrote: Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com http://onlinenw.com onlinenw.com http://onlinenw.com
Re: [AFMUG] Cambium 13.4
Seen it brother. We downgraded Sent from my iPhone On Jul 17, 2015, at 8:10 PM, Matt Hopkins mhopk...@onlinenw.com wrote: This was not a browser cache issue. The APs that had the Registering issue had anywhere from 9-65 SMs. Cambium support advised me to downgrade to 13.2.1 and said that it was a known issue. Matt Hopkins OnlineNW Support 503.687.1030 supp...@onlinenw.com onlinenw.com On 7/17/2015 4:34 PM, George Skorup wrote: Oh, forgot to mention, I didn't see any change in power levels either. On 7/17/2015 6:33 PM, George Skorup wrote: I've updated a couple 5GHz 450 sectors so far and haven't seen this. They all have less than 20 SMs though. Do yours have a lot of SMs? Are you also sure it's not a browser cache issue? Yes, the Lites are a special build, 13.2.1.3 which Cambium hasn't made available so I've also been hesitant to update any of them. On 7/17/2015 5:59 PM, Matt Hopkins wrote: I just wanted to throw out a heads-up for a Friday afternoon. What is happening is that some of the SMs are displayed as registering in the AP even after they are registered. You could click on the SM in the table and it would take you to the SM like normal still. This happened on a 2.4 450 and multiple 5GHz 450 APs. The signal doesn't seem to matter as some of the SMs had signals as good as -67 with 29 SNR. Traffic would not pass over the SM and if they had an additional VC for voice it wouldn't ever establish. I also saw that overall signal levels of SMs were 5 db (give or take) worse on 13.4. Additionally it seems that Lite APs (-APL) are not letting me roll back to 13.2.1, or any other version for that matter. I am glad I only upgraded a handful of APs because I'm excited for the new CoA feature. -- Matt Hopkins Network Administrator 503.687.1030 supp...@onlinenw.com onlinenw.com
