Re: [AFMUG] New project
Stop working out so much? ;-) - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "George Skorup" <geo...@cbcast.com> To: af@afmug.com Sent: Thursday, January 12, 2017 7:38:56 PM Subject: Re: [AFMUG] New project Yeah, just one extra clamp half, longer all-thread for the top mount and extra nuts and washers is pretty much all I meant. I think that will work fine for a sloped leg. You may want to also consider another version. We have several sites with large legs. I usually have to order the Valmont clamp halves that are 7" hole to hole center. And a couple sites off the top of my head are even bigger legs. On 1/12/2017 7:24 PM, Chuck McCown wrote: Howzat? From: Chuck McCown Sent: Thursday, January 12, 2017 6:13 PM To: af@afmug.com Subject: Re: [AFMUG] New project Dang it... From: Mathew Howard Sent: Thursday, January 12, 2017 5:23 PM To: af Subject: Re: [AFMUG] New project It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup < geo...@cbcast.com > wrote: Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: Like this? From: George Skorup Sent: Friday, January 06, 2017 6:00 PM To: af@afmug.com Subject: Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
That works, but I'd like to see a little beef on those outriggers. bp <part15sbs{at}gmail{dot}com> On 1/12/2017 5:24 PM, Chuck McCown wrote: Howzat? *From:* Chuck McCown *Sent:* Thursday, January 12, 2017 6:13 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] New project Dang it... *From:* Mathew Howard *Sent:* Thursday, January 12, 2017 5:23 PM *To:* af *Subject:* Re: [AFMUG] New project It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup <geo...@cbcast.com> wrote: Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: Like this? *From:* George Skorup *Sent:* Friday, January 06, 2017 6:00 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
Yeah, just one extra clamp half, longer all-thread for the top mount and extra nuts and washers is pretty much all I meant. I think that will work fine for a sloped leg. You may want to also consider another version. We have several sites with large legs. I usually have to order the Valmont clamp halves that are 7" hole to hole center. And a couple sites off the top of my head are even bigger legs. On 1/12/2017 7:24 PM, Chuck McCown wrote: Howzat? *From:* Chuck McCown *Sent:* Thursday, January 12, 2017 6:13 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] New project Dang it... *From:* Mathew Howard *Sent:* Thursday, January 12, 2017 5:23 PM *To:* af *Subject:* Re: [AFMUG] New project It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup <geo...@cbcast.com> wrote: Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: Like this? *From:* George Skorup *Sent:* Friday, January 06, 2017 6:00 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
Dang it... From: Mathew Howard Sent: Thursday, January 12, 2017 5:23 PM To: af Subject: Re: [AFMUG] New project It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup <geo...@cbcast.com> wrote: Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: Like this? From: George Skorup Sent: Friday, January 06, 2017 6:00 PM To: af@afmug.com Subject: Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
It's upside down... On Thu, Jan 12, 2017 at 6:15 PM, George Skorup <geo...@cbcast.com> wrote: > Looks fine from my rockin chair. > > > On 1/12/2017 5:23 PM, Chuck McCown wrote: > > Like this? > > *From:* George Skorup > *Sent:* Friday, January 06, 2017 6:00 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] New project > > Looks nice. The only thing I would recommend is bracing so the pipes > aren't too shaky. And make it so it can be installed plumb on a sloped > tower leg. > > On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: > > Current products on the market have a limited range or pipes they fit. > > This goes from 1”OD to 4.5”OD > > > >
Re: [AFMUG] New project
Looks fine from my rockin chair. On 1/12/2017 5:23 PM, Chuck McCown wrote: Like this? *From:* George Skorup *Sent:* Friday, January 06, 2017 6:00 PM *To:* af@afmug.com *Subject:* Re: [AFMUG] New project Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
OK, yeah, that is doable... thanks for the suggestion. From: That One Guy /sarcasm Sent: Monday, January 09, 2017 10:52 AM To: af@afmug.com Subject: Re: [AFMUG] New project a second clamp and nuts/washers on the top mount is all it would take On Fri, Jan 6, 2017 at 7:18 PM, Chuck McCown <ch...@wbmfg.com> wrote: The customer can install the bolts any way they want. Hard to make it plumb on a sloping tower leg. I have other mounts that will allow for that. From: Bill Prince Sent: Friday, January 06, 2017 6:07 PM To: af@afmug.com Subject: Re: [AFMUG] New project What George said plus turn the bolts around on the outriggers so they don't interfere with the radios. bp <part15sbs{at}gmail{dot}com> On 1/6/2017 5:00 PM, George Skorup wrote: Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] New project
a second clamp and nuts/washers on the top mount is all it would take On Fri, Jan 6, 2017 at 7:18 PM, Chuck McCown <ch...@wbmfg.com> wrote: > The customer can install the bolts any way they want. > Hard to make it plumb on a sloping tower leg. I have other mounts that > will allow for that. > > *From:* Bill Prince > *Sent:* Friday, January 06, 2017 6:07 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] New project > > > What George said plus turn the bolts around on the outriggers so they > don't interfere with the radios. > > > > bp > <part15sbs{at}gmail{dot}com> > > > On 1/6/2017 5:00 PM, George Skorup wrote: > > Looks nice. The only thing I would recommend is bracing so the pipes > aren't too shaky. And make it so it can be installed plumb on a sloped > tower leg. > > On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: > > Current products on the market have a limited range or pipes they fit. > > This goes from 1”OD to 4.5”OD > > > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.
Re: [AFMUG] New project
The customer can install the bolts any way they want. Hard to make it plumb on a sloping tower leg. I have other mounts that will allow for that. From: Bill Prince Sent: Friday, January 06, 2017 6:07 PM To: af@afmug.com Subject: Re: [AFMUG] New project What George said plus turn the bolts around on the outriggers so they don't interfere with the radios. bp <part15sbs{at}gmail{dot}com> On 1/6/2017 5:00 PM, George Skorup wrote: Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
What George said plus turn the bolts around on the outriggers so they don't interfere with the radios. bpOn 1/6/2017 5:00 PM, George Skorup wrote: Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD
Re: [AFMUG] New project
Looks nice. The only thing I would recommend is bracing so the pipes aren't too shaky. And make it so it can be installed plumb on a sloped tower leg. On 1/6/2017 6:09 PM, ch...@wbmfg.com wrote: Current products on the market have a limited range or pipes they fit. This goes from 1”OD to 4.5”OD