Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Howard As far as I know, shift +E is a Gold Wave command, since I have used it with various screen readers. However, that doesn't make it a definitive. I would need to refer back to the shortcut manual to confirm. Cordially Philip Philip Francis Anderson Independence for life! Making a Difference, Making it Happen! Winner of "Let's Do Enterprise North Staffordshire 2007. "Laborate pro sapientia et salute" - Let us work for wisdom and health. Contact: Lan: 01782 970755 Mob: 07948 568191 E: p...@philip-anderson.co.uk Available for media interviews and after-dinner speeches. Confidentiality: The content of this email is intended for the recipient specified in this message only and maybe legally privileged. It is strictly forbidden to share any part of this message with any third party without the written consent of the sender. If you received this message in error, please reply to p...@philip-anderson.co.uk and follow with its deletion, so that I can prevent a similar mistake from occurring in the future. Thank you for your cooperation. Consider The Environment. Do not print this email and it's associated content unless it is absolutely necessary. The recipient should check this email and any attachments for the presence of viruses. While every effort to safeguard this message from viruses has been taken, no liability is accepted for any damage caused by any virus transmitted by this email. -Original Message- From: all-audio@groups.io On Behalf Of Howard Traxler Sent: 12 September 2022 13:39 To: all-audio@groups.io Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is this "Shift +E" command part of GoldWave or part of an NVDA addon or JAWS script? I didn't know it exists. I use NVDA. Howard On 9/11/2022 6:08 PM, Philip Francis Anderson wrote: > Hello Darren > > I don't know whether this is what you're looking for, > But, Regarding obtaining a file length reading, > I tend to use > Shift +E, > This brings up a dialogue box. > From here, just tab till you hear, finish > And it will read out the file duration. > > You can also use this same dialogue option to jump to specific points in > your file. > To do this, use the "Time Start" option (the first dialogue box in the menu) > to entre the time from where you would like to start listening and tab to > "OK.". > > Hope this helps. > > Cordially > Philip > Philip Francis Anderson > Independence for life! Making a Difference, Making it Happen! > Winner of "Let's Do Enterprise North Staffordshire 2007. > > "Laborate pro sapientia et salute" - Let us work for wisdom and health. > > Contact: > Lan: 01782 970755 > Mob: 07948 568191 > E: p...@philip-anderson.co.uk > > Available for media interviews and after-dinner speeches. > > Confidentiality: > The content of this email is intended for the recipient specified in this > message only and maybe legally privileged. It is strictly forbidden to share > any part of this message with any third party without the written consent of > the sender. > If you received this message in error, please reply to > p...@philip-anderson.co.uk and follow with its deletion, so that I can > prevent a similar mistake from occurring in the future. > Thank you for your cooperation. > > Consider The Environment. Do not print this email and it's associated > content unless it is absolutely necessary. > The recipient should check this email and any attachments for the presence > of viruses. While every effort to safeguard this message from viruses has > been taken, no liability is accepted for any damage caused by any virus > transmitted by this email. > > -Original Message- > From: all-audio@groups.io On Behalf Of Darran Ross > Sent: 11 September 2022 23:08 > To: all-audio@groups.io > Subject: [all-audio] Goldwave and Issues with Start Marker, I think! > > Hi List. > > Out of nowhere, my version of Goldwave has started acting erratically so far > as the start marker is concerned. I'm hoping someone on this list will have > a fix, because after a week and more of trying to track this problem down, > I'm left defeated! > > When I finish a recording, my first action is to always hit control a to get > the total length of that file. Control a as all GW users will know, is the > keystroke to move the start marker to the beginning of the file, and the end > marker to the finish. > > And here's my problem. Control A no longer seems to do this. I can finish a > recording and no matter the length, the time is always reported as 0.00, I > have to move the start marker to the end of the file and then control A will > give me the correct reading. > > Other things have coincided with this behaviour, dropping
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Howard, could I suggest you change the subject field? - Original Message - From: "Howard Traxler" To: Sent: Monday, September 12, 2022 7:00 PM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! You're right! It went in without a problem. It even set up the input device the way I wanted. Now I'm having trouble with the mic. Have a meeting this afternoon and can't get the mic to work. Howard On 9/12/2022 10:49 AM, dennis wrote: it should work the same as 5.68. On 9/12/2022 10:44 AM, Howard Traxler wrote: My new GoldWave installed in the "program files" folder; but the older one (5.68) remains in the program files (x86) folder; and that's the one that runs from the desktop shortcut. Looks like I'll have to remove the old one and point the shortcut to the new one. In addition, I'll have to put in my registration codes. Then comes the big problem: choosing and setting up a recording device. I'll be back. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25915 (20220912) https://www.eset.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4272): https://groups.io/g/all-audio/message/4272 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
You're right! It went in without a problem. It even set up the input device the way I wanted. Now I'm having trouble with the mic. Have a meeting this afternoon and can't get the mic to work. Howard On 9/12/2022 10:49 AM, dennis wrote: it should work the same as 5.68. On 9/12/2022 10:44 AM, Howard Traxler wrote: My new GoldWave installed in the "program files" folder; but the older one (5.68) remains in the program files (x86) folder; and that's the one that runs from the desktop shortcut. Looks like I'll have to remove the old one and point the shortcut to the new one. In addition, I'll have to put in my registration codes. Then comes the big problem: choosing and setting up a recording device. I'll be back. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4271): https://groups.io/g/all-audio/message/4271 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
it should work the same as 5.68. On 9/12/2022 10:44 AM, Howard Traxler wrote: My new GoldWave installed in the "program files" folder; but the older one (5.68) remains in the program files (x86) folder; and that's the one that runs from the desktop shortcut. Looks like I'll have to remove the old one and point the shortcut to the new one. In addition, I'll have to put in my registration codes. Then comes the big problem: choosing and setting up a recording device. I'll be back. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -- This email has been checked for viruses by Avast antivirus software. www.avast.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4270): https://groups.io/g/all-audio/message/4270 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
My new GoldWave installed in the "program files" folder; but the older one (5.68) remains in the program files (x86) folder; and that's the one that runs from the desktop shortcut. Looks like I'll have to remove the old one and point the shortcut to the new one. In addition, I'll have to put in my registration codes. Then comes the big problem: choosing and setting up a recording device. I'll be back. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4269): https://groups.io/g/all-audio/message/4269 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
there is no different settup. it works better than 5.7. you will love it. On 9/12/2022 9:05 AM, Howard Traxler wrote: GoldWave sent me version 6.65 and it installed itself. Does anyone else have this version; and how is it. I think I'm gonna need help to set up to record. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -- This email has been checked for viruses by Avast antivirus software. www.avast.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4268): https://groups.io/g/all-audio/message/4268 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
GoldWave sent me version 6.65 and it installed itself. Does anyone else have this version; and how is it. I think I'm gonna need help to set up to record. Howard On 9/12/2022 8:43 AM, dennis wrote: yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4267): https://groups.io/g/all-audio/message/4267 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
yes it's the same. i for sure think you need to upgrade to latest version. i seam to remember having the same issue until i upgraded too. On 9/12/2022 6:07 AM, Darran Ross wrote: Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -- This email has been checked for viruses by Avast antivirus software. www.avast.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4266): https://groups.io/g/all-audio/message/4266 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
What is the current version of GoldWave? At this date (9/12/22) the latest one I have is 5.68. Going to try to load it on my win11 machine. Howard On 9/11/2022 6:33 PM, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: Hi List. Out of nowhere, my version of Goldwave has started acting erratically so far as the start marker is concerned. I'm hoping someone on this list will have a fix, because after a week and more of trying to track this problem down, I'm left defeated! When I finish a recording, my first action is to always hit control a to get the total length of that file. Control a as all GW users will know, is the keystroke to move the start marker to the beginning of the file, and the end marker to the finish. And here's my problem. Control A no longer seems to do this. I can finish a recording and no matter the length, the time is always reported as 0.00, I have to move the start marker to the end of the file and then control A will give me the correct reading. Other things have coincided with this behaviour, dropping a marker is no longer resulting in the time stamp being announce, I just hear start or finish. This is really effecting my ability to edit, especially as many of the keystrokes are deeply imbedded in muscle memory. The constant having to slow down and make these awkward adjustments to get accurate file lengths etc is proving to be really frustrating! Does this sound like an issue anyone can offer up a solution for? I've run up against a brick wall and really don't know what to try next. I can only think that I've made some kind of alteration to GW, but for the life of me I can't figure out what I may have done. Any advice will be very gratefully received. Darran -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4265): https://groups.io/g/all-audio/message/4265 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Is this "Shift +E" command part of GoldWave or part of an NVDA addon or JAWS script? I didn't know it exists. I use NVDA. Howard On 9/11/2022 6:08 PM, Philip Francis Anderson wrote: Hello Darren I don't know whether this is what you're looking for, But, Regarding obtaining a file length reading, I tend to use Shift +E, This brings up a dialogue box. From here, just tab till you hear, finish And it will read out the file duration. You can also use this same dialogue option to jump to specific points in your file. To do this, use the "Time Start" option (the first dialogue box in the menu) to entre the time from where you would like to start listening and tab to "OK.". Hope this helps. Cordially Philip Philip Francis Anderson Independence for life! Making a Difference, Making it Happen! Winner of "Let's Do Enterprise North Staffordshire 2007. "Laborate pro sapientia et salute" - Let us work for wisdom and health. Contact: Lan: 01782 970755 Mob: 07948 568191 E: p...@philip-anderson.co.uk Available for media interviews and after-dinner speeches. Confidentiality: The content of this email is intended for the recipient specified in this message only and maybe legally privileged. It is strictly forbidden to share any part of this message with any third party without the written consent of the sender. If you received this message in error, please reply to p...@philip-anderson.co.uk and follow with its deletion, so that I can prevent a similar mistake from occurring in the future. Thank you for your cooperation. Consider The Environment. Do not print this email and it's associated content unless it is absolutely necessary. The recipient should check this email and any attachments for the presence of viruses. While every effort to safeguard this message from viruses has been taken, no liability is accepted for any damage caused by any virus transmitted by this email. -Original Message- From: all-audio@groups.io On Behalf Of Darran Ross Sent: 11 September 2022 23:08 To: all-audio@groups.io Subject: [all-audio] Goldwave and Issues with Start Marker, I think! Hi List. Out of nowhere, my version of Goldwave has started acting erratically so far as the start marker is concerned. I'm hoping someone on this list will have a fix, because after a week and more of trying to track this problem down, I'm left defeated! When I finish a recording, my first action is to always hit control a to get the total length of that file. Control a as all GW users will know, is the keystroke to move the start marker to the beginning of the file, and the end marker to the finish. And here's my problem. Control A no longer seems to do this. I can finish a recording and no matter the length, the time is always reported as 0.00, I have to move the start marker to the end of the file and then control A will give me the correct reading. Other things have coincided with this behaviour, dropping a marker is no longer resulting in the time stamp being announce, I just hear start or finish. This is really effecting my ability to edit, especially as many of the keystrokes are deeply imbedded in muscle memory. The constant having to slow down and make these awkward adjustments to get accurate file lengths etc is proving to be really frustrating! Does this sound like an issue anyone can offer up a solution for? I've run up against a brick wall and really don't know what to try next. I can only think that I've made some kind of alteration to GW, but for the life of me I can't figure out what I may have done. Any advice will be very gratefully received. Darran -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4264): https://groups.io/g/all-audio/message/4264 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Thanks Philip, Dennis and John. Dennis, I'm using GW 5.70, and I've got Auto Scroll Lock checked in the View Menu. I'm assuming this is referred to as Follow Playback Control in new versions? I'm assuming that basically they're one and the same? John, yes, I do have my window maximized. For a brief moment or too earlier in the week I did think this was the problem, sadly though not the case. Philip, your suggestion isn't a procedure I'm currently used to using, but I'll start giving it a go and see how it works out. When all's said and done, perhaps updating to the latest versions of GW and JAWS scripts may be the sensible thing to do. If it continues to happen, it may well be PC through the window time!! Please feel free to toss any other suggestions into the mix. Darran - Original Message - From: "John Covici" To: Sent: Monday, September 12, 2022 3:40 AM Subject: Re: [all-audio] Goldwave and Issues with Start Marker, I think! Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: > Hi List. > > Out of nowhere, my version of Goldwave has started acting > erratically so far as the start marker is concerned. I'm hoping > someone on this list will have a fix, because after a week and > more of trying to track this problem down, I'm left defeated! > > When I finish a recording, my first action is to always hit > control a to get the total length of that file. Control a as > all GW users will know, is the keystroke to move the start > marker to the beginning of the file, and the end marker to the > finish. > > And here's my problem. Control A no longer seems to do this. I > can finish a recording and no matter the length, the time is > always reported as 0.00, I have to move the start marker to the > end of the file and then control A will give me the correct > reading. > > Other things have coincided with this behaviour, dropping a > marker is no longer resulting in the time stamp being announce, > I just hear start or finish. > > This is really effecting my ability to edit, especially as many > of the keystrokes are deeply imbedded in muscle memory. The > constant having to slow down and make these awkward adjustments > to get accurate file lengths etc is proving to be really > frustrating! > > Does this sound like an issue anyone can offer up a solution > for? I've run up against a brick wall and really don't know > what to try next. I can only think that I've made some kind of > alteration to GW, but for the life of me I can't figure out > what I may have done. > > Any advice will be very gratefully received. > > Darran > > > > > > > -- This email has been checked for viruses by Avast antivirus software. www.avast.com -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com __ ESET Internet Security __ This email was scanned, no threats were found. Detection engine version: 25912 (20220912) https://www.eset.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4263): https://groups.io/g/all-audio/message/4263 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Is your window maximized, check that as well. On Sun, 11 Sep 2022 19:33:42 -0400, dennis wrote: > > make sure follow playback control l is checked in the view menue. > > On 9/11/2022 5:08 PM, Darran Ross wrote: > > Hi List. > > > > Out of nowhere, my version of Goldwave has started acting > > erratically so far as the start marker is concerned. I'm hoping > > someone on this list will have a fix, because after a week and > > more of trying to track this problem down, I'm left defeated! > > > > When I finish a recording, my first action is to always hit > > control a to get the total length of that file. Control a as > > all GW users will know, is the keystroke to move the start > > marker to the beginning of the file, and the end marker to the > > finish. > > > > And here's my problem. Control A no longer seems to do this. I > > can finish a recording and no matter the length, the time is > > always reported as 0.00, I have to move the start marker to the > > end of the file and then control A will give me the correct > > reading. > > > > Other things have coincided with this behaviour, dropping a > > marker is no longer resulting in the time stamp being announce, > > I just hear start or finish. > > > > This is really effecting my ability to edit, especially as many > > of the keystrokes are deeply imbedded in muscle memory. The > > constant having to slow down and make these awkward adjustments > > to get accurate file lengths etc is proving to be really > > frustrating! > > > > Does this sound like an issue anyone can offer up a solution > > for? I've run up against a brick wall and really don't know > > what to try next. I can only think that I've made some kind of > > alteration to GW, but for the life of me I can't figure out > > what I may have done. > > > > Any advice will be very gratefully received. > > > > Darran > > > > > > > > > > > > > > > > -- > This email has been checked for viruses by Avast antivirus software. > www.avast.com > > > > > > -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una cov...@ccs.covici.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4262): https://groups.io/g/all-audio/message/4262 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
make sure follow playback control l is checked in the view menue. On 9/11/2022 5:08 PM, Darran Ross wrote: Hi List. Out of nowhere, my version of Goldwave has started acting erratically so far as the start marker is concerned. I'm hoping someone on this list will have a fix, because after a week and more of trying to track this problem down, I'm left defeated! When I finish a recording, my first action is to always hit control a to get the total length of that file. Control a as all GW users will know, is the keystroke to move the start marker to the beginning of the file, and the end marker to the finish. And here's my problem. Control A no longer seems to do this. I can finish a recording and no matter the length, the time is always reported as 0.00, I have to move the start marker to the end of the file and then control A will give me the correct reading. Other things have coincided with this behaviour, dropping a marker is no longer resulting in the time stamp being announce, I just hear start or finish. This is really effecting my ability to edit, especially as many of the keystrokes are deeply imbedded in muscle memory. The constant having to slow down and make these awkward adjustments to get accurate file lengths etc is proving to be really frustrating! Does this sound like an issue anyone can offer up a solution for? I've run up against a brick wall and really don't know what to try next. I can only think that I've made some kind of alteration to GW, but for the life of me I can't figure out what I may have done. Any advice will be very gratefully received. Darran -- This email has been checked for viruses by Avast antivirus software. www.avast.com -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4261): https://groups.io/g/all-audio/message/4261 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
Re: [all-audio] Goldwave and Issues with Start Marker, I think!
Hello Darren I don't know whether this is what you're looking for, But, Regarding obtaining a file length reading, I tend to use Shift +E, This brings up a dialogue box. >From here, just tab till you hear, finish And it will read out the file duration. You can also use this same dialogue option to jump to specific points in your file. To do this, use the "Time Start" option (the first dialogue box in the menu) to entre the time from where you would like to start listening and tab to "OK.". Hope this helps. Cordially Philip Philip Francis Anderson Independence for life! Making a Difference, Making it Happen! Winner of "Let's Do Enterprise North Staffordshire 2007. "Laborate pro sapientia et salute" - Let us work for wisdom and health. Contact: Lan: 01782 970755 Mob: 07948 568191 E: p...@philip-anderson.co.uk Available for media interviews and after-dinner speeches. Confidentiality: The content of this email is intended for the recipient specified in this message only and maybe legally privileged. It is strictly forbidden to share any part of this message with any third party without the written consent of the sender. If you received this message in error, please reply to p...@philip-anderson.co.uk and follow with its deletion, so that I can prevent a similar mistake from occurring in the future. Thank you for your cooperation. Consider The Environment. Do not print this email and it's associated content unless it is absolutely necessary. The recipient should check this email and any attachments for the presence of viruses. While every effort to safeguard this message from viruses has been taken, no liability is accepted for any damage caused by any virus transmitted by this email. -Original Message- From: all-audio@groups.io On Behalf Of Darran Ross Sent: 11 September 2022 23:08 To: all-audio@groups.io Subject: [all-audio] Goldwave and Issues with Start Marker, I think! Hi List. Out of nowhere, my version of Goldwave has started acting erratically so far as the start marker is concerned. I'm hoping someone on this list will have a fix, because after a week and more of trying to track this problem down, I'm left defeated! When I finish a recording, my first action is to always hit control a to get the total length of that file. Control a as all GW users will know, is the keystroke to move the start marker to the beginning of the file, and the end marker to the finish. And here's my problem. Control A no longer seems to do this. I can finish a recording and no matter the length, the time is always reported as 0.00, I have to move the start marker to the end of the file and then control A will give me the correct reading. Other things have coincided with this behaviour, dropping a marker is no longer resulting in the time stamp being announce, I just hear start or finish. This is really effecting my ability to edit, especially as many of the keystrokes are deeply imbedded in muscle memory. The constant having to slow down and make these awkward adjustments to get accurate file lengths etc is proving to be really frustrating! Does this sound like an issue anyone can offer up a solution for? I've run up against a brick wall and really don't know what to try next. I can only think that I've made some kind of alteration to GW, but for the life of me I can't figure out what I may have done. Any advice will be very gratefully received. Darran -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4260): https://groups.io/g/all-audio/message/4260 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
[all-audio] Goldwave and Issues with Start Marker, I think!
Hi List. Out of nowhere, my version of Goldwave has started acting erratically so far as the start marker is concerned. I'm hoping someone on this list will have a fix, because after a week and more of trying to track this problem down, I'm left defeated! When I finish a recording, my first action is to always hit control a to get the total length of that file. Control a as all GW users will know, is the keystroke to move the start marker to the beginning of the file, and the end marker to the finish. And here's my problem. Control A no longer seems to do this. I can finish a recording and no matter the length, the time is always reported as 0.00, I have to move the start marker to the end of the file and then control A will give me the correct reading. Other things have coincided with this behaviour, dropping a marker is no longer resulting in the time stamp being announce, I just hear start or finish. This is really effecting my ability to edit, especially as many of the keystrokes are deeply imbedded in muscle memory. The constant having to slow down and make these awkward adjustments to get accurate file lengths etc is proving to be really frustrating! Does this sound like an issue anyone can offer up a solution for? I've run up against a brick wall and really don't know what to try next. I can only think that I've made some kind of alteration to GW, but for the life of me I can't figure out what I may have done. Any advice will be very gratefully received. Darran -=-=-=-=-=-=-=-=-=-=-=- Groups.io Links: You receive all messages sent to this group. View/Reply Online (#4259): https://groups.io/g/all-audio/message/4259 Mute This Topic: https://groups.io/mt/93621543/21656 Group Owner: all-audio+ow...@groups.io Unsubscribe: https://groups.io/g/all-audio/leave/1074140/21656/405281159/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
