[installation-issues] [Issue 113586] Unable to get correct ver sion of OpenSymbol
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=113586 --- Additional comments from t...@openoffice.org Wed Nov 17 08:02:58 + 2010 --- Adding work-arounds listed in another issue here: To work around this problem there are 3 possible ways: 1) If the installation was done with root privileges everything should be fine. That is the system wide font should have been updated properly. 2) remove the system wide installed font manually (and from all other places the system might look for the font), then install the new font system wide manually. The new font can be found within the OOo installation (named opens___.ttf). For windows the directory to look into is 'Basis\share\fonts\truetype' 3) Remove all OpenSymbol fonts from the installation but NOT the one from with the OOo installation. In that case OOo should make use of the font version found in the installation and that will (always) be the correct version. However this solution will be a bad idea if you want to print, because in that case the printer will not find the OpenSymbol font. On the other hand, since now the correct Unicode points get used by Math, you will probably still have luck as long as some other installed font provides the characters in question. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115620] formula editor can't show greek leters like %PI
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115620 --- Additional comments from t...@openoffice.org Wed Nov 17 08:04:17 + 2010 --- I just copied the list of workarounds from issue 115038 to issue 113586. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115615] Changed saved Data reve rts to original after reopening text document
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115615 User ab changed the following: What|Old value |New value Assigned to|ab|hbrinkm Component|framework |Word processor QA contact|iss...@framework |iss...@sw Subcomponent|scripting |code --- Additional comments from a...@openoffice.org Wed Nov 17 08:17:54 + 2010 --- Anyway this has nothing to do with framework / scripting. - Word processor / code, - hbrinkm - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115615] Changed saved Data reve rts to original after reopening text document
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115615 User ab changed the following: What|Old value |New value Assigned to|ab|hbrinkm Component|framework |Word processor QA contact|iss...@framework |iss...@sw Subcomponent|scripting |code --- Additional comments from a...@openoffice.org Wed Nov 17 08:17:54 + 2010 --- Anyway this has nothing to do with framework / scripting. - Word processor / code, - hbrinkm - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115593] basic: config provider ap plies settings after restart
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115593 User ab changed the following: What|Old value |New value Assigned to|ab|sb --- Additional comments from a...@openoffice.org Wed Nov 17 08:21:36 + 2010 --- ab-sb: As discussed please have a look - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115625] Improve OOo save times by splitting a large file to many.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115625 Issue #|115625 Summary|Improve OOo save times by splitting a large file to ma |ny. Component|framework Version|OOo 3.3 RC4 Platform|Unknown URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|FEATURE Priority|P3 Subcomponent|code Assigned to|tm Reported by|de_logics --- Additional comments from de_log...@openoffice.org Wed Nov 17 08:31:39 + 2010 --- As seen from Issue 110349, the saving mechanism of OOo is - 1) Unreliable 2) Slow For large files, actually the slow part is obvious, there's no work around except by incremental saving, which's difficult to implement. However the saving mechanism could be enhanced by splitting a large file into many parts with a predefined nomenclature. There should be a saving mechanism by which a document will be split to many parts after it has reached a certain size (which will be defined by the user). All splitted files will contain info about the size after which the file should be split, by using this and the nomenclature of the broken files (which will be searched for) the document will be opened as a whole. The document will be broken from the beginning to the end, thus saving a document will only recreate a single file rather than many or a large file. It might happen that a user deletes certain section of the document, making one part lighter... this will be accepted as it is. To fix this issue however there's be an option to recompute all the parts and recreate them. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 115619] introduce osl_setThreadNa me
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115619 User sb changed the following: What|Old value |New value Status|NEW |STARTED Target milestone|--- |OOo 3.4 --- Additional comments from s...@openoffice.org Wed Nov 17 08:31:52 + 2010 --- Pthreads does not support naming threads, AFAIK. There may be platform specific solutions, however (reportedly, prctl(PR_SET_NAME) can be used for this on Linux 2.6); the question, then, is whether all those platform specific solutions can set a name after the thread is created, i.e., whether an additional osl_setThreadName is OK or we rather need an enhanced osl_createThread. Investigation needed. Apart from that: - Not sure returning a sal_Bool (instead of void) from osl_setThreadName is worth it, given the function will be relevant for debugging purposes only, anyway. - The Windows patch differs slightly from what is suggested at http://msdn.microsoft.com/en-us/library/xcb2z8hs.aspx (0x406D1388 vs. MS_VC_EXCEPTION, DWORD vs. ULONG_PTR). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[l10n-issues] [Issue 91304] Update of Slovak autocorre ction file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91304 User sba changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 08:37:21 + 2010 --- OK in OOO330_m15 and DEV300_m93. Closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@l10n.openoffice.org For additional commands, e-mail: issues-h...@l10n.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112722] Format statement problem with dd and nn
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112722 User ab changed the following: What|Old value |New value Status|NEW |STARTED Target milestone|--- |OOo 3.x --- Additional comments from a...@openoffice.org Wed Nov 17 08:40:05 + 2010 --- STARTED, OOo 3.x - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112383] CLng(HFFFFFFFF) fails on 64-bits rather than returning -1
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112383 User ab changed the following: What|Old value |New value Status|NEW |STARTED Target milestone|--- |OOo 3.x --- Additional comments from a...@openoffice.org Wed Nov 17 08:40:19 + 2010 --- STARTED, OOo 3.x - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 99401] user-dictionaries: positiv e dictionaries vs. negativ dictionaries
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=99401 User sba changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 08:41:37 + 2010 --- OK in OOO330_m15 and DEV300_m93. Closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115398] copytablewizard: integer fields from MS Access are created autoincremen t or double in ODBC
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115398 --- Additional comments from lu...@openoffice.org Wed Nov 17 08:43:26 + 2010 --- No new problems encountered with bit fields since I applied the patch. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115626] NetBeans plugin: bad val ue/ entries for localized properties
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115626 Issue #|115626 Summary|NetBeans plugin: bad value/ entries for localized pr |operties Component|udk Version|current Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|sg Reported by|sb --- Additional comments from s...@openoffice.org Wed Nov 17 08:49:31 + 2010 --- http://qa.openoffice.org/issues/show_bug.cgi?id=115386#desc18 claims that the NetBeans plugin produces xcu files that contain erroneous value/ entries for localized properties. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 114278] Simplify security tab pag e of PDF export dialog
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114278 User hi changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from h...@openoffice.org Wed Nov 17 08:50:18 + 2010 --- Verified with cws pl08 = ok - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 109028] Palooca crashes Open Offi ce 3.1-3.1.1 Calc
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=109028 User of changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |WORKSFORME --- Additional comments from o...@openoffice.org Wed Nov 17 08:55:29 + 2010 --- I've tested this extension with OOo 3.3 RC5 and can't see that crash. If there are further problems you should refer to the creators of this extension. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 115553] PDF/A export with transpa rent objects broken
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115553 User hi changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from h...@openoffice.org Wed Nov 17 08:58:28 + 2010 --- Verified with cws pl08 = ok - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115583] FileSendOutlineToPresenta tion crashes Writer
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115583 --- Additional comments from o...@openoffice.org Wed Nov 17 08:59:18 + 2010 --- *** Issue 115612 has been marked as a duplicate of this issue. *** - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115612] Crash when using paste sp ecial, RTF
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115612 User os changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |DUPLICATE --- Additional comments from o...@openoffice.org Wed Nov 17 08:59:18 + 2010 --- Duplicate *** This issue has been marked as a duplicate of 115583 *** - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115617] Black border around video
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115617 User wg changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from w...@openoffice.org Wed Nov 17 09:10:31 + 2010 --- The bug you mention deals with a black border around the images in fullscreen mode under linux. Your problem is something completely different (black bar around the video). Please tell me the issue number of the previous reportings and attach a document for reproducing this. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115386] Extensions not working
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115386 User sb changed the following: What|Old value |New value Assigned to|tm|sb Target milestone|--- |OOo 3.3 --- Additional comments from s...@openoffice.org Wed Nov 17 09:11:51 + 2010 --- md decided to target this issue for OOo 3.3 after all. For the NetBeans problem, I filed issue 115626. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 Issue #|115627 Summary|jvmaccess ABI changed incompatibly Component|udk Version|OOO330m15 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|code Assigned to|sb Reported by|sb --- Additional comments from s...@openoffice.org Wed Nov 17 09:14:21 + 2010 --- see http://www.openoffice.org/servlets/ReadMsg?list=releasesmsgNo=16342 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 User sb changed the following: What|Old value |New value Target milestone|--- |OOo 3.3 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 User khirano changed the following: What|Old value |New value CC|''|'khirano' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115546] [non-pro] Assertion fail ed to load image in Formula-editing mode
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115546 User tl changed the following: What|Old value |New value Status|NEW |STARTED --- Additional comments from t...@openoffice.org Wed Nov 17 09:23:35 + 2010 --- . - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 112880] CLng omit thousand separa tors
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112880 User ab changed the following: What|Old value |New value Status|NEW |STARTED Priority|P4|P3 Target milestone|--- |OOo 3.x --- Additional comments from a...@openoffice.org Wed Nov 17 09:36:35 + 2010 --- STARTED, P4 - P3, OOo 3.x - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115628] fault in AutoCorrect (Ger man Version)
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115628 Issue #|115628 Summary|fault in AutoCorrect (German Version) Component|Word processor Version|OOO320m18 Platform|PC URL| OS/Version|Windows Vista Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|editing Assigned to|writerneedsconfirm Reported by|sisyphos --- Additional comments from sisyp...@openoffice.org Wed Nov 17 09:37:19 + 2010 --- - open OpenOffice Writer (German Language Version) - verify that Extras|Autokorrektur|Ersetzung und Ausnahmen für Sprache is set to Deutsch(Deutschland). - mark the following 20 lines in this text here with the mouse and press Control and C at the same time: -- -- - — ... (c) (r) (tm) - -- -- - Accesoir Acksessoir beerits cm2 dachet Entgeld Freundinen Garrantie - leftclick with the mouse into the Writer window - press the keys control and v at the same time - select FORMAT|AUTOKORREKTUR|ANWENDEN - View the result: Some lines have been changed correctly according to the Ersetzung list, others haven't: lines 1-4 and 9-12. This is the fault. This also happens with self created replacement pairs in the list containing or - e.g.. AutoKorrektur works fine if you enter the above expressions manually, but not if you have to correct prefabricrated text coming from OpenOCR for example. Some further details: - place the cursor at the end of the first line in the Writer document (behind -- ) - delete the space at the end with the BACKSPACE key - press the SPACE key or the RETURN key View the result: The line has changed now according to the replacement list. Keep in mind that the inserted 20 lines already had a SPACE and a RETURN at the end of each line, which did not help. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115628] fault in AutoCorrect (Ger man Version)
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115628 --- Additional comments from sisyp...@openoffice.org Wed Nov 17 09:40:49 + 2010 --- Created an attachment (id=75027) the content of this file is not correctly changed by AutoKorrektur|Anwenden - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115386] Extensions not working
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115386 User vitriol changed the following: What|Old value |New value CC|'kso,md,mh,sb'|'kso,md,mh,sb,vitriol' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 User vitriol changed the following: What|Old value |New value CC|'khirano' |'khirano,vitriol' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115629] OOo 3.3 RC4 Base crashes when standard filter applied
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115629 Issue #|115629 Summary|OOo 3.3 RC4 Base crashes when standard filter applied Component|Database access Version|OOo 3.3 RC4 Platform|Unknown URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|none Assigned to|dbaneedsconfirm Reported by|jgsylvester --- Additional comments from jgsylves...@openoffice.org Wed Nov 17 09:56:28 + 2010 --- I have created a database using OOo 3.3 RC4. This database was created from using Mozilla Thunderbird 3.1.6 as an Address Data Source. I open this database, and select the table addressbook (one of three tables created by Address Data Source Wizard procedure). I then apply the Standard Filter to find any match on any field. When the filter is applied, OOo 3.3 RC4 crashes. For example, in table addressnook, I wish to apply standard filetr on First Name like John. When I entered OK to apply the filter, OOo crashes every time. It would seem that the database created in this fashion is somehow corrupted. I can apply the standard filter on other databases with no problem. I perform the following steps: Open OOo Base 3.3. RC4. Select Wizard-Address Data Source. I thn select Thunderbird as the external address book. I click Next. For my case, there are three address books defined in Thunderbird. OOo Base allows my to select main address book. I select the first addressbook and click Next. I then specify a path and name to the new database to be created, and enter Finish. The database is then created. I open this database, and open Table addressbook. I than select the Standard filter, with any conditions. For example, First Name Like John. When I eneter OK to apply the stanbdard filter, OOo crashes. The smae type of crash occurs when I try to apply the standard filter on any of the other tables. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115629] OOo 3.3 RC4 Base crashes when standard filter applied
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115629 --- Additional comments from jgsylves...@openoffice.org Wed Nov 17 09:58:34 + 2010 --- Created an attachment (id=75028) database created from Thunderbird data source - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115629] OOo 3.3 RC4 Base crashes when standard filter applied
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115629 User oj changed the following: What|Old value |New value Assigned to|dbaneedsconfirm |oj Ever confirmed| |1 Status|UNCONFIRMED |NEW Target milestone|--- |OOo 3.4 --- Additional comments from o...@openoffice.org Wed Nov 17 10:12:23 + 2010 --- Grabbing - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[porting-issues] [Issue 115619] introduce osl_setThreadNa me
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115619 --- Additional comments from f...@openoffice.org Wed Nov 17 10:13:28 + 2010 --- The windows version was taken from http://blogs.msdn.com/b/stevejs/archive/2005/12/19/505815.aspx. As I understood comments around this page, the actual exception code does not really matter, except that no other place should use that specific code. Thanks for taking that! - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@porting.openoffice.org For additional commands, e-mail: issues-h...@porting.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 115537] Mac languagepacks should not offer mounted Offices
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115537 User is changed the following: What|Old value |New value Assigned to|is|of --- Additional comments from i...@openoffice.org Wed Nov 17 10:22:51 + 2010 --- is - of: please verify in cws native347. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[script-issues] [Issue 92642] dim name as String promp ts runtime error BASIC syntax error
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92642 User sba changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 10:23:08 + 2010 --- OK in OOO330_m15. Closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@script.openoffice.org For additional commands, e-mail: issues-h...@script.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 113990] presenter console does no t work with multiple screens
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=113990 --- Additional comments from a...@openoffice.org Wed Nov 17 10:37:45 + 2010 --- The extension repository holds versions of extensions for the last released Office version. At this moment this is the OpenOffice 3.2.1. The presenter console extension working with it is version 1.0.3, which can be found in the repository. If you use a 3.3 development version then you have to use the development version of the extension (v.1.1.0 in this case) as well. As soon as OpenOffice 3.3 is released, presenter console extension v.1.1.0 should be placed in the repository. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 114640] Text Error in log file is not always a packaging error
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114640 User is changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from i...@openoffice.org Wed Nov 17 10:43:43 + 2010 --- Verified in cws native347 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[l10n-issues] [Issue 95769] Add Malagasy,Plateau_Madag ascar [plt-MG] locale data.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95769 User sba changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 10:44:47 + 2010 --- Note: For the currency, both MGA and Ar. are available. OK in OOO330_m15. Closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@l10n.openoffice.org For additional commands, e-mail: issues-h...@l10n.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 115586] Some language packs missi ng translation in 'Add or Remove Programs' pan el
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115586 User is changed the following: What|Old value |New value Assigned to|is|of --- Additional comments from i...@openoffice.org Wed Nov 17 10:51:10 + 2010 --- is - of: please verify in cws native347. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 111050] Impossible to automate PD F/A generation
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=111050 User mav changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from m...@openoffice.org Wed Nov 17 11:01:23 + 2010 --- Looks good in pl08. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 93174] [non-pro] Error: tried to set a wrong value on the progressbar
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93174 User fs changed the following: What|Old value |New value Status|REOPENED |RESOLVED Resolution| |FIXED --- Additional comments from f...@openoffice.org Wed Nov 17 11:04:00 + 2010 --- regina, please submit a separate issue for Calc. This issue here was about Writer, and though the assertion is the same, the root cause is very likely different. resetting issue back to fixed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 93174] [non-pro] Error: tried to set a wrong value on the progressbar
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93174 User fs changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from f...@openoffice.org Wed Nov 17 11:04:29 + 2010 --- seen assertion fixed in m93 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 93174] [non-pro] Error: tried to set a wrong value on the progressbar
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93174 User fs changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from f...@openoffice.org Wed Nov 17 11:04:44 + 2010 --- closing - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115630] Connector area hatch not displayed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115630 Issue #|115630 Summary|Connector area hatch not displayed Component|Presentation Version|OOO320m19 Platform|PC URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|viewing Assigned to|graphicsneedsconfirm Reported by|jaakov --- Additional comments from jaa...@openoffice.org Wed Nov 17 11:06:25 + 2010 --- Reproduce: 1. Create an empty presentation 2. Using the drawing toolbar, create the flowchart connector (circle, not a simple one, but from the flowchart menu button) 3. Right-Click on it, select Area... 4. In tab Hatching, select the any hatch, say, Black 0 degrees, and confirm [Ok] 5. Press F5 to view the slide. Observe the white-area circle with a usual black border. Required: the area of the circle should be hatched, not white. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115629] OOo 3.3 RC4 Base crashes when standard filter applied
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115629 User oj changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |FIXED --- Additional comments from o...@openoffice.org Wed Nov 17 11:07:29 + 2010 --- Fixed in cws dba34b - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115631] openoffice impress displa ys fonts correctly in normal view and incorrec tly in slide show
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115631 Issue #|115631 Summary|openoffice impress displays fonts correctly in normal |view and incorrectly in slide show Component|Presentation Version|OOO320m19 Platform|PC URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|viewing Assigned to|graphicsneedsconfirm Reported by|jaakov --- Additional comments from jaa...@openoffice.org Wed Nov 17 11:08:01 + 2010 --- 1. Create an empty presentation. 2. Choose the Centered Text layout. 3. Click the box and type into it: a||b where || is a symbol with code U+2551 which is inserted via the Insert - Special Character ... menu. 4. Mark everything and set its font to Courier 10 Pitch. 5. Click outside the box two separate times to unmark the box. 6. Press F5 for Slide Show. Observe that the output is a||` The same happens when many other fonts are chosen, say, Century Schoolbook L or URW Bookman L. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115632] Changing fill colour in a nimations doesn't work in presence of nearby o verlapping objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115632 Issue #|115632 Summary|Changing fill colour in animations doesn't work in pre |sence of nearby overlapping objects Component|Presentation Version|OOO320m19 Platform|PC URL| OS/Version|Linux Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|viewing Assigned to|graphicsneedsconfirm Reported by|jaakov --- Additional comments from jaa...@openoffice.org Wed Nov 17 11:10:45 + 2010 --- Reproduce: 1. Draw a rectangle using drawing pane 2. Draw the letter A using T from the drawing pane, so that the letter is outside of, but almost touching the rectangle. 3. Create an emphasis animation for the rectangle that changes the fill color of the rectangle to red on click. 4. Start view by F5, then click once. Observe that the red colour is first solid, but after a second a part of the area near the letter changes its color back to blue. Required: solid colour all the time after the click. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[l10n-issues] [Issue 115633] Add kab and son to i18npo ol
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115633 Issue #|115633 Summary|Add kab and son to i18npool Component|l10n Version|current Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|i18npool Assigned to|er Reported by|ihi --- Additional comments from i...@openoffice.org Wed Nov 17 12:05:34 + 2010 --- Please add the two languages: Kabyle isocode kab Songhay isocode son to i18npool. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@l10n.openoffice.org For additional commands, e-mail: issues-h...@l10n.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[l10n-issues] [Issue 115633] Add kab and son to i18npo ol
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115633 --- Additional comments from i...@openoffice.org Wed Nov 17 12:07:41 + 2010 --- note: there is a cws l10nnewlangs where you can add them - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@l10n.openoffice.org For additional commands, e-mail: issues-h...@l10n.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115630] Connector area hatch not displayed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115630 User wg changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from w...@openoffice.org Wed Nov 17 12:27:44 + 2010 --- Sorry, not reproducible. Is this an original OOo version you are using or from some other distributor? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[l10n-issues] [Issue 115633] Add kab and son to i18npo ol
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115633 User er changed the following: What|Old value |New value Assigned to|er|erack Issue type|DEFECT|ENHANCEMENT --- Additional comments from e...@openoffice.org Wed Nov 17 12:29:05 + 2010 --- @ihi: thanks for the offer, but as I do all i18n work in my spare time I usually create a separate CWS where I gather all new locales related stuff. Reassigning to spare time account. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@l10n.openoffice.org For additional commands, e-mail: issues-h...@l10n.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115632] Changing fill colour in a nimations doesn't work in presence of nearby o verlapping objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115632 User wg changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from w...@openoffice.org Wed Nov 17 12:30:57 + 2010 --- Sorry, not reproducible. Is this an original OOo version you are using or from some other distributor? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 113990] presenter console does no t work with multiple screens
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=113990 --- Additional comments from str...@openoffice.org Wed Nov 17 12:39:56 + 2010 --- It's ok, but how (and where) I can now download the becoming 1.1.0 extension version? If you want that simple users could you help testing new OOo versions, give them a simple way to do it. I just click on Show all versions, but I get only this page with 1.0.3 version for the various platforms http://extensions.services.openoffice.org/it/node/814/releases If I register also to the extensions page, I'll see more versions? Why you don't follow the Mozilla Way and list also the alpha, beta and rc versions? As well as you could find here for: - Flagfox extension https://addons.mozilla.org/it/firefox/addon/5791/versions/ - Pearl Crescent Page Saver Basic extension https://addons.mozilla.org/it/firefox/addon/10367/versions/ for example using two famous and useful Firefox extensions. Thank you, Carlo - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 114929] Reset of indentation on a pplying List Style does not work with a select ion
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114929 User mru changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from m...@openoffice.org Wed Nov 17 12:41:38 + 2010 --- Checked in DEV300m93. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 112141] Reintroduce color codes f or mime type icons
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112141 --- Additional comments from methylene_b...@openoffice.org Wed Nov 17 12:58:18 + 2010 --- For whatever it may be worth, yet another Vote for Color Icons has been started on the a ref=http://wiki.services.openoffice.org/wiki/Talk:ODF_icons_i-team;newly created wiki for the i-team /a. At this point I really do have to wonder who is making us repeat ourselves over and over again. It's as if the responsible parties can only write and not read English. Is Oracle behind this or some philosophical, idealistic Open-Document movement at the top? Is it a conspiracy to kill OpenOffice? Must we find a way to pry OpenOffice out of the hands of corporate sponsorship? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 113990] presenter console does no t work with multiple screens
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=113990 User af changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |WORKSFORME --- Additional comments from a...@openoffice.org Wed Nov 17 12:58:28 + 2010 --- @strata: You are absolutely right in criticizing the current conditions. I do not know of any way of downloading the 1.1.0 version of the extension. At the moment you can not even download a release candidate from the OOo website (RC4 is already removed, RC5 not yet available.) I am also aware that one easily uses the wrong version of the extension. But I guess this is one of the downsides of testing an unreleased developer version. When I discover a way to access the proper 1.1.0 version of the extension, I will post it here. I am sorry for the inconvenience. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 101078] WaE in sw
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=101078 User os changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from o...@openoffice.org Wed Nov 17 12:59:58 + 2010 --- set to verified - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 104053] Some style list boxes don 't show all styles in table dialog
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=104053 User os changed the following: What|Old value |New value Assigned to|os|mru --- Additional comments from o...@openoffice.org Wed Nov 17 13:01:26 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 105063] end key behaves faulty in lines ending with space - line break
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=105063 User os changed the following: What|Old value |New value Assigned to|os|mru --- Additional comments from o...@openoffice.org Wed Nov 17 13:01:53 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 112141] Reintroduce color codes f or mime type icons
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112141 User cornouws changed the following: What|Old value |New value CC|'cornouws,darobm,ed2,glepp|'darobm,ed2,gleppert,goran |ert,goranrakic,hatchjn,ite|rakic,hatchjn,itet,jbfaure |t,jbfaure,kamataki,kongnan|,kamataki,kongnan,laurentg |,laurentgodard,lendo,lh,lu|odard,lendo,lh,luctur,md,m |ctur,md,mh,of,prowlerxpla,|h,of,prowlerxpla,st,sweige |st,sweigel,vitriol' |l,vitriol' --- Additional comments from corno...@openoffice.org Wed Nov 17 13:05:57 + 2010 --- - sorry, can't be of any help here anymore - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 26822] toolbar is not restored af ter undo
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=26822 User nn changed the following: What|Old value |New value Status|STARTED |RESOLVED Resolution| |FIXED Target milestone|OOo Later |OOo 3.4 --- Additional comments from n...@openoffice.org Wed Nov 17 13:05:58 + 2010 --- Fixed in CWS dr78. b) similar problem from above is no error. If the image is not selected, it's correct to keep the cell toolbar. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 114861] Writer: Undo of Apply Li st Style causes hard-set indentation values a t paragraph
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114861 User mru changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from m...@openoffice.org Wed Nov 17 13:18:49 + 2010 --- Checked in DEV300m93. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 110287] sw: Omit caption separato r, if caption text is empty
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=110287 User os changed the following: What|Old value |New value Assigned to|os|mru --- Additional comments from o...@openoffice.org Wed Nov 17 13:19:16 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 112413] Wrong output range when s electing DB rows for printing
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112413 User os changed the following: What|Old value |New value Assigned to|os|hi --- Additional comments from o...@openoffice.org Wed Nov 17 13:19:35 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 112630] Writer is not generating emails with mail merge and pdf
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112630 User os changed the following: What|Old value |New value Assigned to|os|hi --- Additional comments from o...@openoffice.org Wed Nov 17 13:20:05 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115314] crash when inserting a te xt frame with a doc-local macro assigned to th e Click object event
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115314 User os changed the following: What|Old value |New value Assigned to|os|mru --- Additional comments from o...@openoffice.org Wed Nov 17 13:21:19 + 2010 --- Reassigned for verification - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[dba-issues] [Issue 115634] unable to edit a file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115634 Issue #|115634 Summary|unable to edit a file Component|Database access Version|1.0.0 Platform|All URL| OS/Version|Windows 7 Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|none Assigned to|dbaneedsconfirm Reported by|lodiaz --- Additional comments from lod...@openoffice.org Wed Nov 17 13:39:49 + 2010 --- After creating and editing a database file and subsequently saving, the file will open in a read only mode and I am unable to edit again. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@dba.openoffice.org For additional commands, e-mail: issues-h...@dba.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115630] Connector area hatch not displayed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115630 --- Additional comments from jaa...@openoffice.org Wed Nov 17 13:52:07 + 2010 --- Created an attachment (id=75029) Example of bad presentation - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115593] basic: config provider ap plies settings after restart
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115593 User sb changed the following: What|Old value |New value CC|'brinzing'|'brinzing,pl' --- Additional comments from s...@openoffice.org Wed Nov 17 13:54:20 + 2010 --- @hitec_tsc: Cannot reproduce in DEV300_m93: In Writer, File - Export as PDF... dialog shows, for example, a value of 90% for General - Images - JPEG compression - Quality. Cancel that dialog, execute the attached Basic code, open the dialog again, the example value has changed to 95% now (and is grayed out, as Lossless compression is enabled now). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115630] Connector area hatch not displayed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115630 --- Additional comments from jaa...@openoffice.org Wed Nov 17 13:56:58 + 2010 --- A version shipped with debian (Version 1:3.2.1-7 in debian's classification). Their own bugtracking page for impress seems not being taken care of at the moment, so I decided to check upstream. The testcase is attached. Please notice that the error occurs only in the slide show mode; editing mode and PDF export work as expected. Please confirm or reject, providing the version you are using. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 112141] Reintroduce color codes f or mime type icons
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112141 --- Additional comments from tomm...@openoffice.org Wed Nov 17 13:57:59 + 2010 --- @cornows bye, at least you tried to hear us. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115617] Black border around video
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115617 --- Additional comments from mok...@openoffice.org Wed Nov 17 14:03:02 + 2010 --- Created an attachment (id=75030) Sample file with sample video clip (see other attachment) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115632] Changing fill colour in a nimations doesn't work in presence of nearby o verlapping objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115632 --- Additional comments from jaa...@openoffice.org Wed Nov 17 14:04:51 + 2010 --- Created an attachment (id=75031) Example of bad animation. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115632] Changing fill colour in a nimations doesn't work in presence of nearby o verlapping objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115632 --- Additional comments from jaa...@openoffice.org Wed Nov 17 14:06:14 + 2010 --- The Debian version (1:3.2.1-7 according to their classification). Their own bugtacking page for impress seems unmaintained at the moment, so I decided to check upstream. I've created an attachment. After opening the file, press F5 and click to trigger animation. Observe differently coloured regions near letter A. Please confirm or reject denoting the impress version you are using. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115617] Black border around video
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115617 --- Additional comments from mok...@openoffice.org Wed Nov 17 14:10:49 + 2010 --- I've attached a sample file (without a video - for some reason your site won't let me upload one to the issue report). The link I gave is the only thing I could find, though there was a similar issue with images posted in a forum somewhere. As I was messing with it, I noticed two things: 1) This applies to *any* video, of any format. Mpg, avi, asf, anything. 2) It's somehow linked to video size. If I drag a video to make it larger, the actual video stays the same size and the black border increases in thickness to compensate. If I reduce the video size by about 30%, the border completely goes away. Note that this is not a *real* workaround - the inability to scale video is a major bug and renders Impress useless to me. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 97556] Main screen is not repaint ed properly in RTL
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=97556 User sba changed the following: What|Old value |New value Status|VERIFIED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 14:12:46 + 2010 --- OK in OOO330_m15. Closed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115386] Extensions not working
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115386 User sb changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |FIXED --- Additional comments from s...@openoffice.org Wed Nov 17 14:24:16 + 2010 --- fixed as http://hg.services.openoffice.org/cws/sb136/rev/f96ada186859 (transplanting sb132: #i114155# use 'en' as additional fallback locale after 'en-US') plus http://hg.services.openoffice.org/cws/sb136/rev/9b04618aea27 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 User sb changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |FIXED --- Additional comments from s...@openoffice.org Wed Nov 17 14:24:26 + 2010 --- fixed as http://hg.services.openoffice.org/cws/sb136/rev/e28089260e26 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@udk.openoffice.org For additional commands, e-mail: issues-h...@udk.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[tools-issues] [Issue 108776] export all num_put symbol s
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=108776 --- Additional comments from s...@openoffice.org Wed Nov 17 14:26:05 + 2010 --- (clean-up had to be partially reverted to avoid ABI incompatibility of jvmaccess library, see issue 115627) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@tools.openoffice.org For additional commands, e-mail: issues-h...@tools.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 115635] xprint is way obsolete
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115635 Issue #|115635 Summary|xprint is way obsolete Component|gsl Version|DEV300m93 Platform|All URL| OS/Version|Unix, X11 Status|NEW Status whiteboard| Keywords| Resolution| Issue type|TASK Priority|P3 Subcomponent|code Assigned to|hdu Reported by|hdu --- Additional comments from h...@openoffice.org Wed Nov 17 14:29:37 + 2010 --- XPRINTing hasn't been used since even before OOo 1.0. Most remainders disappeared with the changes for issue 99633. Now finish off this su...bsystem for good. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 114072] second calc document too long on opening
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=114072 --- Additional comments from laurentgod...@openoffice.org Wed Nov 17 14:33:24 + 2010 --- the problem is due to a broadcast to all open documents each time a named ranges is inserted while opening the second document solved by kohei in libreoffice http://cgit.freedesktop.org/libreoffice/calc/commit/?id=4e3c4a8560a0e5d6e26693bfacaba5e2bc0f50d2 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 115635] xprint is way obsolete
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115635 User hdu changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |FIXED --- Additional comments from h...@openoffice.org Wed Nov 17 14:37:36 + 2010 --- Done in CWS vcl117. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115631] openoffice impress displa ys fonts correctly in normal view and incorrec tly in slide show
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115631 --- Additional comments from j...@openoffice.org Wed Nov 17 14:54:37 + 2010 --- are you sure the other fonts do have the glyph U+2551 ? btw. do you use the Linux build from download.openoffice.org or do you use a Linux distribution based build ? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115636] Mailmerge does not work a nd It does not provide any error msg
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115636 Issue #|115636 Summary|Mailmerge does not work and It does not provide any er |ror msg Component|Word processor Version|1.0.0 Platform|Unknown URL| OS/Version|All Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|configuration Assigned to|writerneedsconfirm Reported by|mcanonic --- Additional comments from mcano...@openoffice.org Wed Nov 17 15:07:02 + 2010 --- I have some problem with MailMerge. Doing the exact things with the same setup I see two different behaviours: - at home, I can send my 226 emails - at work, I cannot send, and the mailmerge does not say anything One of the weird thing is that in the sending status window I can see: 0 of 0 email sent What I do not understand in of 0. How is it possible? Of course, the test connection works well. Is there a way to debug this? Thanks, M - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115618] [regression] Pdf export: in some fonts Hebrew becomes Gibberish
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115618 User hi changed the following: What|Old value |New value CC|'kaplan' |'kaplan,pl' Assigned to|hi|hdu Ever confirmed| |1 Status|UNCONFIRMED |NEW Target milestone|--- |OOo 3.4 --- Additional comments from h...@openoffice.org Wed Nov 17 15:39:51 + 2010 --- Confirmed, but too late for 3.3 Thereofore set to 3.4 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115632] Changing fill colour in a nimations doesn't work in presence of nearby o verlapping objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115632 --- Additional comments from j...@openoffice.org Wed Nov 17 15:40:25 + 2010 --- works like a charm on Solaris x86 with OOo330m15 (OOo 3.3.0 RC5) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115593] basic: config provider ap plies settings after restart
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115593 --- Additional comments from hitec_...@openoffice.org Wed Nov 17 15:44:33 + 2010 --- @sb: I have just tested in OOO330m15 and cannot reproduce it there either. It seems like it is working there just as intended. Tested again in OOO320m18 and there it will not be applied till restart. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[udk-issues] [Issue 115627] jvmaccess ABI changed inc ompatibly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115627 User sb changed the following: What|Old value |New value Status|RESOLVED |VERIFIED --- Additional comments from s...@openoffice.org Wed Nov 17 15:51:05 + 2010 --- verified as follows: 1 Pointing .../openoffice.org/basis3.2/ure-link of a unxlngi6.pro OOo 3.2 installation to .../openoffice.org/ure of a unxlngi6.pro OOo CWS sb136 installation and starting the OOo 3.2 installation soffice succeeds now (it failed before with ...openoffice.org3/program/../basis-link/ure-link/lib/libjvmaccessgcc3.so.3: version `UDK_3.1' not found (required by .../openoffice.org3/program/../basis-link/program/libvclli.so)). 2 Executing the below Bash command on a Linux machine indicates that the only changes in symbol im-/exports between all the executables and dynamic libraries of plain OOO330_m15 unxlngi6.pro and CWS sb136 unxlngi6.pro are those turning back the jvmaccess incompatibility: $ cd /cws/so-cwsserv03/sb136/OOO330/unxlngi6.pro find bin lib -path lib/python/lib-dynload -prune -o -type f ! -name '*.o' -exec bash -ec 'file $0 | fgrep -qw ELF { diff (objdump -T /so/ws/OOO330/unxlngi6.pro/$(printf %s $0 | sed -e s:^\\(bin\\|lib\\):.m15:) | sed -e s/[ \t][ \t]*/ /g -e s/^.*: file format .*// -e s/^[0-9a-f][0-9a-f]* .* [0-9a-f][0-9a-f]* // | c++filt | LC_ALL=C sort) (objdump -T $0 | sed -e s/[ \t][ \t]*/ /g -e s/^.*: file format .*// -e s/^[0-9a-f][0-9a-f]* .* [0-9a-f][0-9a-f]* // | c++filt | LC_ALL=C sort) || printf ^^^ %s ^^^\n $0; }' {} \; 35a36,38 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3.1 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) 70,72d72 UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3_0_0 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) ^^^ lib/javavm.uno.so ^^^ 8237a8238,8239 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() 8294,8295d8295 UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() ^^^ lib/libvclli.so ^^^ 25a26,27 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() 43,44d44 UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() ^^^ lib/javaloader.uno.so ^^^ 26a27 UDK_3.1 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) 54d54 UDK_3_0_0 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) ^^^ lib/libjuhx.so ^^^ 35a36,40 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3.1 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) 50,54d54 UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() UDK_3_0_0 jvmaccess::VirtualMachine::VirtualMachine(JavaVM_*, int, bool, JNIEnv_*) ^^^ lib/libjava_uno.so ^^^ 209a210,211 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() 223,224d224 UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3_0_0 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() ^^^ lib/libsvgfilterli.so ^^^ 2178a2179,2180 UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::AttachGuard(rtl::Referencejvmaccess::VirtualMachine const) UDK_3.1 jvmaccess::VirtualMachine::AttachGuard::~AttachGuard() 2250,2251d2251 UDK_3_0_0
[graphics-issues] [Issue 115637] OLE file include in Impre ss
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115637 Issue #|115637 Summary|OLE file include in Impress Component|Presentation Version|OOo 3.2 Platform|All URL| OS/Version|Windows XP Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|code Assigned to|graphicsneedsconfirm Reported by|cyril74 --- Additional comments from cyri...@openoffice.org Wed Nov 17 15:53:56 + 2010 --- I wanted to include some OLE object to show some diagrams in an Impress slideshow. The source file is the same for all my diagrams. I need to include each diagrams in separated pages of the slideshow. When I update the diagrams in Calc, i need to update the slideshow ones, that's why I use OLE objects. When I update the data in the slideshow all OLE objects reset the view position. It shows the upper left corner of my source file instead of the diagram that i whant to show. The enhancement needed is: Add a way to lock the view of OLE objects to forgive the reset of the view position on data update. or Add a way to lock the view on an object in the source file of OLE object. Example: Make the view locked on a diagram. When I move the diagram in the source file, the OLE object view follow it. if it's possible. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[gsl-issues] [Issue 115635] xprint is way obsolete
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115635 User pl changed the following: What|Old value |New value Target milestone|--- |OOo 3.4 --- Additional comments from p...@openoffice.org Wed Nov 17 16:00:52 + 2010 --- target - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@gsl.openoffice.org For additional commands, e-mail: issues-h...@gsl.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115386] Extensions not working
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115386 --- Additional comments from s...@openoffice.org Wed Nov 17 16:06:40 + 2010 --- For verification, it can be checked that in a Swedish OOo installation (regardless of system locale selected when starting soffice, it is the installed OOo UI locale that matters here, see Tools - Options... - Language Settings - Languages - Language of - User interface), 1 After installing gdocs_2.3.0.oxt from http://extensions.services.openoffice.org/fr/project/ooo2gd, the Fil top-level menu in a Writer window contains an English Google Docs Zoho sub-menu and there is a Tillägget 1 floating window. 2 After installing Linguist-1.4.oxt from http://extensions.services.openoffice.org/en/project/Linguist, there is an English Linguist top-level menu in a Writer window. 3 After installing BookmarksMenu-0.6.2.oxt from http://extensions.services.openoffice.org/en/project/bookmarksmenu, there is an English Bookmarks Menu... menu entry (and English dialog, when you select it) at Verktyg - Tillägg. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115593] basic: config provider ap plies settings after restart
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115593 User sb changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |WORKSFORME --- Additional comments from s...@openoffice.org Wed Nov 17 16:12:48 + 2010 --- . - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115593] basic: config provider ap plies settings after restart
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115593 User sb changed the following: What|Old value |New value Status|RESOLVED |CLOSED --- Additional comments from s...@openoffice.org Wed Nov 17 16:13:08 + 2010 --- . - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[graphics-issues] [Issue 115631] openoffice impress displa ys fonts correctly in normal view and incorrec tly in slide show
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115631 --- Additional comments from jaa...@openoffice.org Wed Nov 17 16:19:15 + 2010 --- Neither of the fonts Courier 10 Pitch, Century Schoolbook L, URW Bookman L seems to have this glyph, at least not according to the Insert Special Character However, this issue seems to affect not the charater itself, but its successors, which is bad if there is not just a single following character b as in the example, but lots of text... Essentially, everything after the glyph is unreadable. Expected behaviour is, that the glyph U+2551 is rendered the best possible way (which actually produces a good result currently), and that the text afterwards is NOT affected. Debian version (1:3.2.1-7 according to debian's classfication) is used. But the debian bugs-of- impress page seems to be unmaintained in the last time, so I'm reporting here. Please check with your version and confirm or reject giving your version number. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@graphics.openoffice.org For additional commands, e-mail: issues-h...@graphics.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 112141] Reintroduce color codes f or mime type icons
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=112141 --- Additional comments from areynal...@openoffice.org Wed Nov 17 16:32:02 + 2010 --- Must we find a way to pry OpenOffice out of the hands of corporate sponsorship Well, LibreOffice is trying to do exactly that. Someone mentioned it in the thread, and it seems promising. I am using Beta2 right now. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 115638] mishmash - resize OLE obj ects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115638 Issue #|115638 Summary|mishmash - resize OLE objects Component|Word processor Version|OOo 3.3 RC4 Platform|All URL| OS/Version|All Status|UNCONFIRMED Status whiteboard| Keywords| Resolution| Issue type|FEATURE Priority|P3 Subcomponent|formatting Assigned to|writerneedsconfirm Reported by|stenm --- Additional comments from st...@openoffice.org Wed Nov 17 16:32:16 + 2010 --- Hi A problem is related at least to OLE objects from ChemBioDrow, 12 and ChemSkech 12 and 11 - under WinXP SP3 or Kubuntu 10.10 and all 3.x versions of OO.org When I tried setup of Size via Object menu I had those problems: - original size in cm is not equal to relative size 100%. It seems that is ration between size of the object (formula) to size of of the original OLE object and of course vertical and horizontal size in % is different. Size in cm seems related to real size of draw and not size of page. So, when I inserted several draws with different contents, I had to manually calculated for example 80% from Original Size to made it looks similar. - sometime - difficult to reproduce, When I changed value Width I could see automatically calculated value of Height, but at the end only Width value was applied to OLE. (Keep Ratio was ticked.) - editing of a content leads to deformation of the content after return to Writer. Size of OLE object should be manually resize and again manually recalculated relative size. - if I clicked on Original Size, Width = 27.29 cm button and then ticked Width Relative I got value Width = 100% but when I untick that I got different value of Width = 25.70 cm. (all ticks relative and keep ratio were at the beginning blank, inserted OLE object was filed up to all corners of an original size A4, landscape) - Could be nice if I ticked Keep Ration and then object keep same ration all the time, even if I drag the side or conner of the object by mouse. - those OLE objects sometime look different under Linux and Win version OO.Org. Many thanks S- - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115639] disable sfx2/qa/cppunit f or now
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115639 Issue #|115639 Summary|disable sfx2/qa/cppunit for now Component|framework Version|DEV300m93 Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|PATCH Priority|P1 Subcomponent|code Assigned to|vg Reported by|sb --- Additional comments from s...@openoffice.org Wed Nov 17 16:36:16 + 2010 --- On Windows, building sfx2 can fail if there is an old sfx2 library in solver, as sfx2/qa/cppunit will erroneously prefer a solver sfx2 library over the one in the local output tree on Windows. As a workaround, the attached DEV300_m93-sfx2.patch will change sfx2/qa/cppunit so that it is not built during a normal build, but only built via subsequenttests. This workaround should be removed once the new build environment removes the delivering of libraries from local output trees to solver (I'll write a follow up issue for that). @vg: please apply as master fix, as unattended build bots (feedme) suffer from this problem - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115639] disable sfx2/qa/cppunit f or now
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115639 --- Additional comments from s...@openoffice.org Wed Nov 17 16:36:50 + 2010 --- Created an attachment (id=75032) fix - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115640] revert issue 115639 worka round again
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115640 Issue #|115640 Summary|revert issue 115639 workaround again Component|framework Version|current Platform|All URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P3 Subcomponent|code Assigned to|sb Reported by|sb --- Additional comments from s...@openoffice.org Wed Nov 17 16:38:16 + 2010 --- see issue 115639 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 115639] disable sfx2/qa/cppunit f or now
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=115639 --- Additional comments from s...@openoffice.org Wed Nov 17 16:38:55 + 2010 --- (I'll write a follow up issue for that: issue 115640) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@framework.openoffice.org For additional commands, e-mail: issues-h...@framework.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org