Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
At 01:43 AM 29/05/2004, Clemens Ladisch wrote: No other message? There should be at least an error message when the driver fails to initialize. Please try to compile the kernel with ALSA's "Debug detection" enabled, or --with-debug=detect when configuring the package. Ok, here dmesg, with debug=detect. usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd :00:1d.0: Intel Corp. 82801DB USB (Hub #1) PCI: Setting latency timer of device :00:1d.0 to 64 uhci_hcd :00:1d.0: irq 16, io base d800 uhci_hcd :00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd :00:1d.1: Intel Corp. 82801DB USB (Hub #2) PCI: Setting latency timer of device :00:1d.1 to 64 uhci_hcd :00:1d.1: irq 19, io base d400 uhci_hcd :00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd :00:1d.2: Intel Corp. 82801DB USB (Hub #3) PCI: Setting latency timer of device :00:1d.2 to 64 uhci_hcd :00:1d.2: irq 18, io base d000 uhci_hcd :00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new full speed USB device using address 2 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/usb/usbaudio.c:2569: 2:1:1: add audio endpoint 0x1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/usb/usbaudio.c:2569: 2:2:1: add audio endpoint 0x82 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [4] FU [Speaker Playback Switch] ch = 1, val = 0/1/1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [4] FU [Speaker Playback Volume] ch = 2, val = 0/255/1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [2] FU [Speaker Playback Switch] ch = 1, val = 0/1/1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [2] FU [Speaker Playback Volume] ch = 2, val = 0/255/1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [7] FU [Speaker Playback Switch] ch = 1, val = 0/1/1 ALSA /mnt/software/linux/alsa/alsa-driver-1.0.5rc1/alsa-kernel/usb/usbmixer.c:866: [7] FU [Speaker Playback Volume] ch = 2, val = 0/255/1 snd-usb-audio: probe of 1-2:1.0 failed with error -5 usbcore: registered new driver snd-usb-audio -- Luke Yelavich http://www.audioslack.com [EMAIL PROTECTED] --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Luke Yelavich wrote: > usbcore: registered new driver snd-usb-audio No other message? There should be at least an error message when the driver fails to initialize. Please try to compile the kernel with ALSA's "Debug detection" enabled, or --with-debug=detect when configuring the package. Regards, Clemens --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
At 11:14 PM 27/05/2004, Clemens Ladisch wrote: Luke Yelavich wrote: > below is the information I get when attempting to use this soundcard under > a 2.6.6 kernel with alsa drivers 1.0.5rc1 and hotplug. > > dmes: > usbaudio: device 3 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces This is the OSS driver (audio). Put the line audio into the file /etc/hotplug/blacklist to prevent it from loading (or deactivate it in the kernel config). Clemens This made no difference. I completely disabled hotplug and loaded the modules manually. First the usb controller module, and then the snd-usb-audio module. The output of dmesg is below usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd :00:1d.0: Intel Corp. 82801DB USB (Hub #1) PCI: Setting latency timer of device :00:1d.0 to 64 uhci_hcd :00:1d.0: irq 16, io base d800 uhci_hcd :00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd :00:1d.1: Intel Corp. 82801DB USB (Hub #2) PCI: Setting latency timer of device :00:1d.1 to 64 uhci_hcd :00:1d.1: irq 19, io base d400 uhci_hcd :00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd :00:1d.2: Intel Corp. 82801DB USB (Hub #3) PCI: Setting latency timer of device :00:1d.2 to 64 uhci_hcd :00:1d.2: irq 18, io base d000 uhci_hcd :00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-2: new full speed USB device using address 2 usb 1-2: device not accepting address 2, error -71 usb 1-2: new full speed USB device using address 3 usb 1-2: device not accepting address 3, error -71 usbcore: registered new driver snd-usb-audio -- Luke Yelavich http://www.audioslack.com [EMAIL PROTECTED] --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Luke Yelavich wrote: > below is the information I get when attempting to use this soundcard under > a 2.6.6 kernel with alsa drivers 1.0.5rc1 and hotplug. > > dmes: > usbaudio: device 3 audiocontrol interface 0 has 1 input and 1 output AudioStreaming > interfaces This is the OSS driver (audio). Put the line audio into the file /etc/hotplug/blacklist to prevent it from loading (or deactivate it in the kernel config). HTH Clemens --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Hi again all I don't know what became of the info I sent to the list previously, but below is the information I get when attempting to use this soundcard under a 2.6.6 kernel with alsa drivers 1.0.5rc1 and hotplug. dmes: usb 2-2: new full speed USB device using address 3 usbaudio: device 3 audiocontrol interface 0 has 1 input and 1 output AudioStreaming interfaces usbaudio: device 3 interface 2 altsetting 1 unsupported channels 4 framesize 2 usbaudio: device 3 interface 1 altsetting 1 unsupported channels 4 framesize 2 usbaudio: constructing mixer for Terminal 8 type 0x0301 usbaudio: registered mixer 14,16 usbaudio: constructing mixer for Terminal 12 type 0x0101 usbaudio: unit 11 invalid MIXER_UNIT descriptor (bitmap too small) usbaudio: registered mixer 14,32 usb_audio_parsecontrol: usb_audio_state at f7b00f5c hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-:00:1d.0-2 lsusb -v Bus 004 Device 001: ID : Virtual Hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x Virtual idProduct 0x Hub bcdDevice2.06 iManufacturer 3 Linux 2.6.6 uhci_hcd iProduct2 Intel Corp. 82801DB USB (Hub #3) iSerial 1 :00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 Self Powered MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type none wMaxPacketSize 2 bInterval 255 Language IDs: (length=4) 0409 English(US) Bus 003 Device 001: ID : Virtual Hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x Virtual idProduct 0x Hub bcdDevice2.06 iManufacturer 3 Linux 2.6.6 uhci_hcd iProduct2 Intel Corp. 82801DB USB (Hub #2) iSerial 1 :00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 Self Powered MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type none wMaxPacketSize 2 bInterval 255 Language IDs: (length=4) 0409 English(US) Bus 002 Device 003: ID 0a92:0091 Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass0 Interface bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a92 idProduct 0x0091 bcdDevice1.00 iManufacturer 1 AUDIOTRAK iProduct2 MAYA44 USB iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 295 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Ok, lsusb -v is below. WHen the unit is plugged in, it doesn't even appear in /proc/asound, although snd-usb-audio is loaded. I tried it with and without hotplug. Luke Bus 004 Device 001: ID : Virtual Hub Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass9 Hub bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x Virtual idProduct 0x Hub bcdDevice2.06 iManufacturer 3 Linux 2.6.6-ThinkPad uhci_hcd iProduct2 Intel Corp. 82801DB USB (Hub #3) iSerial 1 :00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 Self Powered MaxPower0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes3 Transfer TypeInterrupt Synch Type none wMaxPacketSize 2 bInterval 255 Language IDs: (length=4) 0409 English(US) Bus 003 Device 003: ID 0a92:0091 Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass0 Interface bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0a92 idProduct 0x0091 bcdDevice1.00 iManufacturer 1 AUDIOTRAK iProduct2 MAYA44 USB iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 295 bNumInterfaces 4 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength10 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 142 bInCollection 2 baInterfaceNr( 0) 1 baInterfaceNr( 1) 2 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 3 wTerminalType 0x0603 Line Connector bAssocTerminal 0 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength10 bDescriptorType36 bDescriptorSubtype 6 (FEATURE_UNIT) bUnitID 4 bSourceID 3 bControlSize1 bmaControls( 0) 0x01 Mute bmaControls( 0) 0x02 Volume bmaControls( 0) 0x02 Volume iFeature0 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0603 Line Connector bAssocTerminal 9 bNrChannels 2 wChannelConfig 0x0003 Left Front (L) Right Front (R) iChannelNames 0 iTerminal 0 AudioControl Interface Descriptor: bLength
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Hallo, Luke Yelavich hat gesagt: // Luke Yelavich wrote: > As above. The vendor and product IDs given are 0xa92 and 0x91 respectively. Oops, that's sad: I thought, this was almost the same device as the other Maya's which worked out of the box, > If there is any more information I can give, please let me know. Normally "lsusb -vv" is needed. Ciao -- Frank Barknecht _ __footils.org__ --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
Re: [Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Luke Yelavich wrote: > As above. The vendor and product IDs given are 0xa92 and 0x91 respectively. > > If there is any more information I can give, please let me know. Output of "lsusb -v"? And what exactly does "doesn't work" mean? Regards, Clemens --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
[Alsa-devel] MAYA44 USB audio device doesn't work with 1.0.4.
Hi all As above. The vendor and product IDs given are 0xa92 and 0x91 respectively. If there is any more information I can give, please let me know. -- Luke Yelavich http://www.audioslack.com [EMAIL PROTECTED] --- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click ___ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
