2017-07-19 8:46 GMT+02:00 Clemens Ladisch :
> The HID interface is managed by another driver. The kernel driver
> already knows how to write to these registers with a control request
> instead (see below). Could you check if a control read request works,
> or if the response still goes through the HID pipe?
>
I've tried that, but unfortunately it didn't work. The input request reads
zero bytes.
Well, I think that means I'll have to use my workarount with libhidapi.
Below is my code. I don't feel very confident on all those bmRequestType,
bRequest, wValue and other parameters, I just used the ones from your
example. May be later I will be able to sniff the communication of the card
with its proprietary Windows driver, and if I get a different results I'll
revert back to you.
int cm106_read(libusb_device_handle *handle, char reg, uint16_t *data)
{
int res;
unsigned char buf[4] = {0x30, // 0x20 to write, 0x30 to read
0x00, // DATAL
0x00, // DATAH
reg}; // Register address
if ((res = libusb_control_transfer(handle, LIBUSB_ENDPOINT_OUT |
LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_ENDPOINT,
LIBUSB_REQUEST_SET_CONFIGURATION, 0, 0, buf, 4, 0)) != 4)
return res;
if ((res = libusb_control_transfer(handle, LIBUSB_ENDPOINT_IN |
LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_ENDPOINT,
LIBUSB_REQUEST_SET_CONFIGURATION, 0, 0, buf, 4, 0)) < 0) // <-- THIS
FUNCTION RETURNS 0
return res;
if (res != 3)
{
fprintf(stderr, "DEBUG Invalid response length"
return -1;
}
if (buf[0] & 0xe0 != 0x20) // No register data in the input
{
fprintf(stderr, "DEBUG data: %02X %02X %02X\n", buf[0],
buf[1], buf[2]);
return -1;
}
*data = (((uint16_t)buf[2]) << 8) + buf[1];
return 0;
}
// Just for completeness, the below function successfully writes the data
into cm106 registers
int cm106_write(libusb_device_handle *handle, char reg, uint16_t data)
{
unsigned char buf[4] = {0x20, // 0x20 to write,
0x30 to read
data & 0xff,// DATAL
(data >> 8) & 0xff, // DATAH
reg}; // Register address
return libusb_control_transfer(handle, LIBUSB_ENDPOINT_OUT |
LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_ENDPOINT,
LIBUSB_REQUEST_SET_CONFIGURATION, 0, 0, buf, 4, 0);
}
Thank you for your support!
Best regards
Denis Shulyaka
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot___
Alsa-user mailing list
Alsa-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-user
