Re: ibm ultrium lto library/tape loader using chg-zd-mtx (freebsd)(amanda2.4.4)
Question: What does /usr/local/sbin/mt -f /dev/pass2 status give you? Armand Sulter [EMAIL PROTECTED] 8/25/2004 9:31:28 AM I'm trying to get this puppy to work with 3 tapes for now, i can control the robot fine with the mtx program but amanda keeps giving me : bash-2.04$ /usr/local/sbin/amlabel bef Test01 slot 2 amlabel: could not load slot 2: could not determine current slot, are you sure your drive slot is 2 I put the tape from slot 1 in the drive, it knows theres one in slot 2 and 3 but it keeps complaining about the 'current' slot. From what i can tell the output of the mtx command is in a format the regex's from the glue script should match. changer.conf firstslot=1 # First slot lastslot=3 # Last slot cleanslot=-1# Don't use a cleaning tape slot driveslot=0 # This is the slot of the drive havereader=0# Do not use the barcode reader autoclean=0 # Do not autoclean offline_before_unload=0 # Does not require offline before unload havebarcode=0 amanda.conf (snippet) - runtapes 1 tapedev /dev/pass2 changerdev /dev/pass3 tapetype IBM-LTO3580 mtx results - bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 status Storage Changer /dev/pass3:1 Drives, 20 Slots ( 1 Import/Export ) Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = Storage Element 1:Empty:VolumeTag= Storage Element 2:Full :VolumeTag= Storage Element 3:Full :VolumeTag= Storage Element 4:Empty:VolumeTag= Storage Element 5:Empty:VolumeTag= Storage Element 6:Empty:VolumeTag= Storage Element 7:Empty:VolumeTag= Storage Element 8:Empty:VolumeTag= Storage Element 9:Empty:VolumeTag= Storage Element 10:Empty:VolumeTag= Storage Element 11:Empty:VolumeTag= Storage Element 12:Empty:VolumeTag= Storage Element 13:Empty:VolumeTag= Storage Element 14:Empty:VolumeTag= Storage Element 15:Empty:VolumeTag= Storage Element 16:Empty:VolumeTag= Storage Element 17:Empty:VolumeTag= Storage Element 18:Empty:VolumeTag= Storage Element 19:Empty:VolumeTag= Storage Element 20 IMPORT/EXPORT:Empty:VolumeTag= bash-2.04$ /usr/local/sbin/mtx -f /dev/pass2 inquiry Product Type: Tape Drive Vendor ID: 'IBM ' Product ID: 'ULTRIUM-TD1 ' Revision: '12U2' Attached Changer: No bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'C7200 ' Revision: '126I' Attached Changer: No does anyone have any experience with these ? With best regards, Armand Sulter - Systems Administration ENTER.NET - The Road to the Internet Starts Here! (tm) (610) 437-2221 * http://www.enter.net/ * email:[EMAIL PROTECTED]
Re: ibm ultrium lto library/tape loader using chg-zd-mtx (freebsd)(amanda2.4.4)
It comes back with : bash-2.04# mt -f /dev/pass2 status mt: /dev/pass2: Operation not permitted Are you saying i should be able to access /dev/pass2 as a regular tape drive ? i read somewhere sometimes you have to use the changer as tapedev, tried that tho, same results. With best regards, Armand Sulter - Systems Administration ENTER.NET - The Road to the Internet Starts Here! (tm) (610) 437-2221 * http://www.enter.net/ * email:[EMAIL PROTECTED] On Wed, 25 Aug 2004, Frazier Scott wrote: Question: What does /usr/local/sbin/mt -f /dev/pass2 status give you? Armand Sulter [EMAIL PROTECTED] 8/25/2004 9:31:28 AM I'm trying to get this puppy to work with 3 tapes for now, i can control the robot fine with the mtx program but amanda keeps giving me : bash-2.04$ /usr/local/sbin/amlabel bef Test01 slot 2 amlabel: could not load slot 2: could not determine current slot, are you sure your drive slot is 2 I put the tape from slot 1 in the drive, it knows theres one in slot 2 and 3 but it keeps complaining about the 'current' slot. From what i can tell the output of the mtx command is in a format the regex's from the glue script should match. changer.conf firstslot=1 # First slot lastslot=3 # Last slot cleanslot=-1# Don't use a cleaning tape slot driveslot=0 # This is the slot of the drive havereader=0# Do not use the barcode reader autoclean=0 # Do not autoclean offline_before_unload=0 # Does not require offline before unload havebarcode=0 amanda.conf (snippet) - runtapes 1 tapedev /dev/pass2 changerdev /dev/pass3 tapetype IBM-LTO3580 mtx results - bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 status Storage Changer /dev/pass3:1 Drives, 20 Slots ( 1 Import/Export ) Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = Storage Element 1:Empty:VolumeTag= Storage Element 2:Full :VolumeTag= Storage Element 3:Full :VolumeTag= Storage Element 4:Empty:VolumeTag= Storage Element 5:Empty:VolumeTag= Storage Element 6:Empty:VolumeTag= Storage Element 7:Empty:VolumeTag= Storage Element 8:Empty:VolumeTag= Storage Element 9:Empty:VolumeTag= Storage Element 10:Empty:VolumeTag= Storage Element 11:Empty:VolumeTag= Storage Element 12:Empty:VolumeTag= Storage Element 13:Empty:VolumeTag= Storage Element 14:Empty:VolumeTag= Storage Element 15:Empty:VolumeTag= Storage Element 16:Empty:VolumeTag= Storage Element 17:Empty:VolumeTag= Storage Element 18:Empty:VolumeTag= Storage Element 19:Empty:VolumeTag= Storage Element 20 IMPORT/EXPORT:Empty:VolumeTag= bash-2.04$ /usr/local/sbin/mtx -f /dev/pass2 inquiry Product Type: Tape Drive Vendor ID: 'IBM ' Product ID: 'ULTRIUM-TD1 ' Revision: '12U2' Attached Changer: No bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'C7200 ' Revision: '126I' Attached Changer: No does anyone have any experience with these ? With best regards, Armand Sulter - Systems Administration ENTER.NET - The Road to the Internet Starts Here! (tm) (610) 437-2221 * http://www.enter.net/ * email:[EMAIL PROTECTED]
Re: ibm ultrium lto library/tape loader using chg-zd-mtx(freebsd)(amanda2.4.4)
Yup. I was trying to set up amanda using chg-zd-mtx. mtx -f /dev/sg5 yielded info on the changer, and mtx -f /dev/sg4 yielded info on the drive so I figured tapedev should be /dev/sg4. When I couldn't get the tests to work, I looked at the script and discovered that in the places it accesses tapedev, it uses the mt command. So, I changed my tapedev to /dev/nst0 (the no-rewind device I usually use with mt), and it worked like a charm. Now I'm just trying to figure out how to enable host control of compression on my Dell PowerVault 120T DDS4. Frazier. Armand Sulter [EMAIL PROTECTED] 8/25/2004 11:25:26 AM It comes back with : bash-2.04# mt -f /dev/pass2 status mt: /dev/pass2: Operation not permitted Are you saying i should be able to access /dev/pass2 as a regular tape drive ? i read somewhere sometimes you have to use the changer as tapedev, tried that tho, same results. With best regards, Armand Sulter - Systems Administration ENTER.NET - The Road to the Internet Starts Here! (tm) (610) 437-2221 * http://www.enter.net/ * email:[EMAIL PROTECTED] On Wed, 25 Aug 2004, Frazier Scott wrote: Question: What does /usr/local/sbin/mt -f /dev/pass2 status give you? Armand Sulter [EMAIL PROTECTED] 8/25/2004 9:31:28 AM I'm trying to get this puppy to work with 3 tapes for now, i can control the robot fine with the mtx program but amanda keeps giving me : bash-2.04$ /usr/local/sbin/amlabel bef Test01 slot 2 amlabel: could not load slot 2: could not determine current slot, are you sure your drive slot is 2 I put the tape from slot 1 in the drive, it knows theres one in slot 2 and 3 but it keeps complaining about the 'current' slot. From what i can tell the output of the mtx command is in a format the regex's from the glue script should match. changer.conf firstslot=1 # First slot lastslot=3 # Last slot cleanslot=-1# Don't use a cleaning tape slot driveslot=0 # This is the slot of the drive havereader=0# Do not use the barcode reader autoclean=0 # Do not autoclean offline_before_unload=0 # Does not require offline before unload havebarcode=0 amanda.conf (snippet) - runtapes 1 tapedev /dev/pass2 changerdev /dev/pass3 tapetype IBM-LTO3580 mtx results - bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 status Storage Changer /dev/pass3:1 Drives, 20 Slots ( 1 Import/Export ) Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = Storage Element 1:Empty:VolumeTag= Storage Element 2:Full :VolumeTag= Storage Element 3:Full :VolumeTag= Storage Element 4:Empty:VolumeTag= Storage Element 5:Empty:VolumeTag= Storage Element 6:Empty:VolumeTag= Storage Element 7:Empty:VolumeTag= Storage Element 8:Empty:VolumeTag= Storage Element 9:Empty:VolumeTag= Storage Element 10:Empty:VolumeTag= Storage Element 11:Empty:VolumeTag= Storage Element 12:Empty:VolumeTag= Storage Element 13:Empty:VolumeTag= Storage Element 14:Empty:VolumeTag= Storage Element 15:Empty:VolumeTag= Storage Element 16:Empty:VolumeTag= Storage Element 17:Empty:VolumeTag= Storage Element 18:Empty:VolumeTag= Storage Element 19:Empty:VolumeTag= Storage Element 20 IMPORT/EXPORT:Empty:VolumeTag= bash-2.04$ /usr/local/sbin/mtx -f /dev/pass2 inquiry Product Type: Tape Drive Vendor ID: 'IBM ' Product ID: 'ULTRIUM-TD1 ' Revision: '12U2' Attached Changer: No bash-2.04$ /usr/local/sbin/mtx -f /dev/pass3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'C7200 ' Revision: '126I' Attached Changer: No does anyone have any experience with these ? With best regards, Armand Sulter - Systems Administration ENTER.NET - The Road to the Internet Starts Here! (tm) (610) 437-2221 * http://www.enter.net/ * email:[EMAIL PROTECTED]
