amanda 2.6.1 amrestore issue
I'm running amanda 2.6.1 on Solaris 10/x86 and having a problem with my test of a file restore. tapedev is /dev/rmt/0hn, its an LTO4, should probably just use /dev/rmt/0n. Tape is imbedded in an SL24 jukebox, the the problem doesn't seem related to the robot. Interestingly, same version was able to run a restore on DLT drive on solaris 10/Sparc, so I'm thinking me rather than architecture (that is solaris sparc v x86, not Amanda architecture), but I don't know for sure. Target file system is ZFS produced with snapshots, but again, parallel config with the Sparc system. # amrestore /dev/rmt/0hn Restoring from tape Curie01 starting with file 1. amrestore: 1: restoring FILE: date 20090223143428 host curie disk /thump lev 1 comp .gz program APPLICATION Could not seek device /dev/rmt/0hn to file 2: Error reading Amanda header. --- Brian R Cuttler brian.cutt...@wadsworth.org Computer Systems Support(v) 518 486-1697 Wadsworth Center(f) 518 473-6384 NYS Department of HealthHelp Desk 518 473-0773 IMPORTANT NOTICE: This e-mail and any attachments may contain confidential or sensitive information which is, or may be, legally privileged or otherwise protected by law from further disclosure. It is intended only for the addressee. If you received this in error or from someone who was not authorized to send it to you, please do not distribute, copy or use it or any attachments. Please notify the sender immediately by reply e-mail and delete this from your system. Thank you for your cooperation.
Re: amanda 2.6.1 amrestore issue
On Mon, Feb 23, 2009 at 3:18 PM, Brian Cuttler wrote: > amdevchec liked the drive, and amlabel and amcheck report > success when labeling or checking it. Sorry, I didn't mean to reply privately in my last message. Anyway, can you try running the amrestore under 'truss' to see what is going on at the syscall level? Just snip the part between where it opens the tape device and the final error message. Dustin -- Storage Software Engineer http://www.zmanda.com
[Amanda-users] amanda error
Hi i am getting an error with amanda backup i am using amanda 2.6.0 on the server and 2.5.1 on the client. the error is > FAILURE DUMP SUMMARY: >LON-TI-OFF-01 /home/company lev 0 FAILED "[missing result for > /home/company in LON-TI-OFF-01 response]" in the log files there is no sign of an error except in dump.1 in the /etc/amanda/DailySet11/ > > SENDING FLUSHES... > ENDFLUSH > > SETTING UP FOR ESTIMATES... > planner: time 0.016: setting up estimates for LON-TI-OFF-01:/home/company > LON-TI-OFF-01:/home/company overdue 14299 days for level 0 > setup_estimate: LON-TI-OFF-01:/home/company: command 0, options: none > last_level -1 next_level0 -14299 level_days 0getting estimates 0 (-2) -1 > (- > 2) -1 (-2) > planner: time 0.016: setting up estimates took 0.000 secs > > GETTING ESTIMATES... > driver: pid 2936 executable /usr/libexec/amanda/driver version 2.6.0p2 > driver: adding holding disk 0 dir /media/Backup/dumps/DailySet11 size > 533192704 chunksize 1048576 > planner: time 0.197: got result for host LON-TI-OFF-01 disk /home/company: 0 > -> -2K, -1 -> -2K, -1 -> -2K > error result for host LON-TI-OFF-01 disk /home/company: missing estimate > planner: time 0.198: getting estimates took 0.181 secs > FAILED QUEUE: > 0: LON-TI-OFF-01 /home/company > DONE QUEUE: empty > Can anyone help i have also changes the etimeout to 3600 still no joy the server is a fedora and the client is an ubuntu any other info need i can provide +-- |This was sent by mahmoudh...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +--
Re: amanda 2.6.1 amrestore issue
Are you able to manually seek to this tape file on this same host and device? mt -f /dev/rmt/0hn asf 2 If so, can you read the header? dd if=/dev/rmt/0hn bs=32k count=1 Trying to narrow it down to the device/tape or Amanda. Paul On Mon, 2009-02-23 at 14:40 -0500, Brian Cuttler wrote: > I'm running amanda 2.6.1 on Solaris 10/x86 and having a problem with > my test of a file restore. > > tapedev is /dev/rmt/0hn, its an LTO4, should probably just use /dev/rmt/0n. > Tape is imbedded in an SL24 jukebox, the the problem doesn't seem related > to the robot. > > Interestingly, same version was able to run a restore on DLT drive > on solaris 10/Sparc, so I'm thinking me rather than architecture > (that is solaris sparc v x86, not Amanda architecture), but I don't > know for sure. > > Target file system is ZFS produced with snapshots, but again, parallel > config with the Sparc system. > > # amrestore /dev/rmt/0hn > Restoring from tape Curie01 starting with file 1. > amrestore: 1: restoring FILE: date 20090223143428 host curie disk /thump lev > 1 comp .gz program APPLICATION > Could not seek device /dev/rmt/0hn to file 2: Error reading Amanda header. > > > --- >Brian R Cuttler brian.cutt...@wadsworth.org >Computer Systems Support(v) 518 486-1697 >Wadsworth Center(f) 518 473-6384 >NYS Department of HealthHelp Desk 518 473-0773 > > > > IMPORTANT NOTICE: This e-mail and any attachments may contain > confidential or sensitive information which is, or may be, legally > privileged or otherwise protected by law from further disclosure. It > is intended only for the addressee. If you received this in error or > from someone who was not authorized to send it to you, please do not > distribute, copy or use it or any attachments. Please notify the > sender immediately by reply e-mail and delete this from your > system. Thank you for your cooperation. > > -- Design Engineer Zmanda, Inc. http://www.zmanda.com/
Re: [Amanda-users] amanda error
Check the client amandad.*.debug and sendsize.*.debug files. Jean-Louis ay4you wrote: Hi i am getting an error with amanda backup i am using amanda 2.6.0 on the server and 2.5.1 on the client. the error is FAILURE DUMP SUMMARY: LON-TI-OFF-01 /home/company lev 0 FAILED "[missing result for /home/company in LON-TI-OFF-01 response]" in the log files there is no sign of an error except in dump.1 in the /etc/amanda/DailySet11/ SENDING FLUSHES... ENDFLUSH SETTING UP FOR ESTIMATES... planner: time 0.016: setting up estimates for LON-TI-OFF-01:/home/company LON-TI-OFF-01:/home/company overdue 14299 days for level 0 setup_estimate: LON-TI-OFF-01:/home/company: command 0, options: none last_level -1 next_level0 -14299 level_days 0getting estimates 0 (-2) -1 (- 2) -1 (-2) planner: time 0.016: setting up estimates took 0.000 secs GETTING ESTIMATES... driver: pid 2936 executable /usr/libexec/amanda/driver version 2.6.0p2 driver: adding holding disk 0 dir /media/Backup/dumps/DailySet11 size 533192704 chunksize 1048576 planner: time 0.197: got result for host LON-TI-OFF-01 disk /home/company: 0 -> -2K, -1 -> -2K, -1 -> -2K error result for host LON-TI-OFF-01 disk /home/company: missing estimate planner: time 0.198: getting estimates took 0.181 secs FAILED QUEUE: 0: LON-TI-OFF-01 /home/company DONE QUEUE: empty Can anyone help i have also changes the etimeout to 3600 still no joy the server is a fedora and the client is an ubuntu any other info need i can provide +-- |This was sent by mahmoudh...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +--
