Re: [Error] amdgpu powerplay ip block error with -22.

2020-01-02 Thread Yusuf Altıparmak
Hello,

Still can't find a solution about this. Anyone can help me about this ?

Regards.


Yusuf Altıparmak , 2 Oca 2020 Per, 13:29 tarihinde
şunu yazdı:

> Hello,
>
> First you could check if the binary ‘polaris12_smc.bin’ is in your system:
>> /lib/firmware/../amdgpu/
>>
> 'polaris12_smc.bin' exists in my /lib/firmware/amdgpu folder. There are
> also 18 other binaries which starts with 'polaris12_'.
>
> If it’s there, then does this happen after a warm reset?
>>
>
> This does happen when booting up the board with ramdisk image (initrfs
> stage).
>
> Regards.
>
>>
___
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx


Re: [Error] amdgpu powerplay ip block error with -22.

2020-01-02 Thread Yusuf Altıparmak
Hello,

First you could check if the binary ‘polaris12_smc.bin’ is in your system:
> /lib/firmware/../amdgpu/
>
'polaris12_smc.bin' exists in my /lib/firmware/amdgpu folder. There are
also 18 other binaries which starts with 'polaris12_'.

If it’s there, then does this happen after a warm reset?
>

This does happen when booting up the board with ramdisk image (initrfs
stage).

Regards.

>
___
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx


RE: [Error] amdgpu powerplay ip block error with -22.

2020-01-02 Thread Feng, Kenneth
[AMD Official Use Only - Internal Distribution Only]

First you could check if the binary 'polaris12_smc.bin' is in your system: 
/lib/firmware/../amdgpu/
If it's there, then does this happen after a warm reset?
Thanks.


From: amd-gfx  On Behalf Of Yusuf 
Altiparmak
Sent: Thursday, January 2, 2020 4:22 PM
To: amd-gfx@lists.freedesktop.org
Subject: [Error] amdgpu powerplay ip block error with -22.

[CAUTION: External Email]
I am having this error with kernel version 4.19 amdgpu driver for a polaris12 
based GPU. What could be the problem? Any suggestions? Thanks.

Full dmesg:
[5.426009] [drm] amdgpu kernel modesetting enabled.
[5.430109] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x6987 
0x1787:0x2389 0x80).
[5.437591] [drm] register mmio base: 0x2020
[5.440899] [drm] register mmio size: 262144
[5.443888] [drm] add ip block number 0 
[5.447465] [drm] add ip block number 1 
[5.450953] [drm] add ip block number 2 
[5.454442] [drm] add ip block number 3 
[5.458018] [drm] add ip block number 4 
[5.460979] [drm] add ip block number 5 
[5.464466] [drm] add ip block number 6 
[5.468042] [drm] add ip block number 7 
[5.471531] [drm] add ip block number 8 
[5.475047] [drm] UVD is enabled in VM mode
[5.477928] [drm] UVD ENC is enabled in VM mode
[5.481154] [drm] VCE enabled in VM mode
[5.712355] ATOM BIOS: 113-ER16BFC-001
[5.714830] [drm] GPU posting now...
[5.833704] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment 
size is 9-bit
[5.840950] amdgpu 0001:01:00.0: BAR 2: releasing [mem 
0x22000-0x2201f 64bit pref]
[5.847930] amdgpu 0001:01:00.0: BAR 0: releasing [mem 
0x21000-0x21fff 64bit pref]
[5.855688] [drm:.amdgpu_device_resize_fb_bar [amdgpu]] *ERROR* Problem 
resizing BAR0 (-2).
[5.855706] amdgpu 0001:01:00.0: BAR 0: assigned [mem 
0x23000-0x23fff 64bit pref]
[5.869663] amdgpu 0001:01:00.0: BAR 2: assigned [mem 
0x24000-0x2401f 64bit pref]
[5.876582] amdgpu 0001:01:00.0: VRAM: 4096M 0x00F4 - 
0x00F4 (4096M used)
[5.884160] amdgpu 0001:01:00.0: GART: 256M 0x - 
0x0FFF
[5.890519] [drm] Detected VRAM RAM=4096M, BAR=256M
[5.894093] [drm] RAM width 128bits GDDR5
[5.896941] [TTM] Zone  kernel: Available graphics memory: 4062380 kiB
[5.902177] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[5.907402] [TTM] Initializing pool allocator
[5.910464] [TTM] Initializing DMA pool allocator
[5.919973] [drm] amdgpu: 4096M of VRAM memory ready
[5.923659] [drm] amdgpu: 4096M of GTT memory ready.
[5.927358] [drm] GART: num cpu pages 65536, num gpu pages 65536
[5.932957] [drm] PCIE GART of 256M enabled (table at 0x00F4).
[5.939122] [drm] Chained IB support enabled!
[5.948873] [drm] Found UVD firmware Version: 1.79 Family ID: 16
[5.953647] [drm] UVD ENC is disabled
[5.975818] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[6.404774] amdgpu: [powerplay] Failed to send Message.
[6.835902] amdgpu: [powerplay] SMU Firmware start failed!
[6.840086] amdgpu: [powerplay] Failed to load SMU ucode.
[6.844184] amdgpu: [powerplay] smc start failed
[6.847498] amdgpu: [powerplay] powerplay hw init failed
[6.852281] [drm:.amdgpu_device_init [amdgpu]] *ERROR* hw_init of IP block 
 failed -22
[6.859883] amdgpu 0001:01:00.0: amdgpu_device_ip_init failed
[6.864330] amdgpu 0001:01:00.0: Fatal error during GPU init
[6.868689] [drm] amdgpu: finishing device.
[7.339427] pcieport 0001:00:00.0: AER: Corrected error received: 
0001:00:00.0
[7.345374] pcieport 0001:00:00.0: PCIe Bus Error: severity=Corrected, 
type=Data Link Layer, (Transmitter ID)
[7.353993] pcieport 0001:00:00.0:   device [1957:0824] error 
status/mask=1000/2000
[7.361047] pcieport 0001:00:00.0:[12] Timeout
[7.706137] amdgpu: [powerplay]
last message was failed ret is 0
[8.127667] amdgpu: [powerplay]
failed to send message 261 ret is 0
[8.966331] amdgpu: [powerplay]
last message was failed ret is 0
[9.320290] pcieport 0001:00:00.0: AER: Corrected error received: 
0001:00:00.0
[9.326226] pcieport 0001:00:00.0: PCIe Bus Error: severity=Corrected, 
type=Data Link Layer, (Transmitter ID)
[9.334845] pcieport 0001:00:00.0:   device [1957:0824] error 
status/mask=1000/2000
[9.341899] pcieport 0001:00:00.0:[12] Timeout
[9.387975] amdgpu: [powerplay]
failed to send message 261 ret is 0
[   10.226636] amdgpu: [powerplay]
last message was failed ret is 0
[   10.648275] amdgpu: [powerplay]
failed to send message 261 ret is 0
[   11.486932] amdgpu: [powerplay]
last message was failed ret is 0
[   11.908570] amdgpu: [powerplay]
failed to send message 261 ret is 0
[