RE: [analog-help] analog works great,but anlgform turned my life misrable on apache server
T > the server isnt mine!!. Tried moving the log files onto a different box for analysis ? > if apache is timing out as you said, then i would get the error after > 5 minutes, not right on when i click the page. am i right? That sounds logical - it would be unlikely though that Apache would present a timed-out error for anything else. If you are getting an error message right away it may be more prudent to look into whether or not the CGI for is actually getting run. Try submitting the form and then looking at the output of PS to see if Analog is actually running at all. Or, set the QV paramater to 1 and see if the form is passing variables at all. There's a lot of trouble-shooting tips in the new documentation too. > and lets assume i manage to convince my webhost to increase the > timeout, which i can bet safely they wont do.. what timeout should the > set? That depends on how long it takes Analog to actually run .. on a pumped up Sun Enterprise 450, we analyse over 60 million hits in just under 12 minutes, so I set our timeout to 20 min to be on the safe side. This is an extreme case and I wouldn't recommend it for a public webserver. Why not simply cut your log files into smaller chunks and see if that helps ? > and dont you guys think that something has to be done about this? i > mean. if all the people with apache servers are facing this problem > then it is a real big problem! I have seen no evidence that this is a general probem with Apache or Analog - we have a lot of folk at our institution using them both. > (( wierd thing is that i searched through the lists. and i barely > found one complaint like this one )) This probably means that this problem is not as general as you think and is more likely local to your site (worse luck). Cheers, ajb. Andrew Bennett Fileserver & Network Support CoOrdinator IT Services, The University of Queensland Library email: [EMAIL PROTECTED] phone: 3365 6722 + | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to |http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at |http://www.mail-archive.com/analog-help@lists.isite.net/ |http://lists.isite.net/listgate/analog-help/archives/ |http://www.tallylist.com/archives/index.cfm/mlist.7 +
RE: [analog-help] analog works great,but anlgform turned my lifemisrable on apache server
but.. :( the server isnt mine!!. anyhow. what i was thinking of is the following: if apache is timing out as you said, then i would get the error after 5 minutes, not right on when i click the page. am i right? and lets assume i manage to convince my webhost to increase the timeout, which i can bet safely they wont do.. what timeout should the set? and dont you guys think that something has to be done about this? i mean. if all the people with apache servers are facing this problem then it is a real big problem! (( wierd thing is that i searched through the lists. and i barely found one complaint like this one )) Regards Louis > -Original Message- > From: Andrew Bennett [mailto:[EMAIL PROTECTED]] > Sent: Friday, May 25, 2001 4:56 AM > To: LM; [EMAIL PROTECTED] > Subject: Re: [analog-help] analog works great,but anlgform turned my > life misrable on apache server > > > 2 cents worth ./. > > You know - I had a similar problem. For us, it turned out that > Apache was timing out the page before analog had finished > producing the output. By default, Apache times out after 5 minutes. > Extend the timeout period in the Apache config files and you may > find things work perfectly. > > ajb > > hi > > > > i recently got analog v5.01 installed on my webhost`s Apache 1.3.14 > > running on Red Hat Linux release 7.0 (Guinness) Kernel 2.2.16-22 on an > > i686. > > > > my webhost supports virtually everything.. php,cgi,perl,ssi,etc > > > > installing analog and making it work was fairly easy ( took me 4 hours > > to finish since i had tonnes of things to configure :) ) > > > > i can run ./analog from the shell command prompt. and it`ll produce a > > sweet output file in the exact way that i want it :) > > > > the problem is in the anlgform.html and anlgform.pl > > > > i can never make them work no matter what. > > > > i have analog installed in a directory inside my httpdocs ( webroot ) > > > > whenever i try to use the form. i open the page anlgform.html, i > > choose all my settings, and i click the button to generate the logs. i > > get an error. > > > > this error is one of three. > > > > either 500. > > or ERROR 305 -- The server stopped sending data. > > or a strange ( cant find server ) like the page you get when either > > your internet or the server is down. > > > > i checked my error logs. and i found only one thing > > > > /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/analog: > > Warning L: Large number of corrupt lines in logfile > > /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log: try > > different LOGFORMAT (For help on all errors and warnings, see > > docs/errors.html) > > Current logfile format: > > %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r%wHTTP%j" %c %b "%f" "%B"\n > > %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r" %c %b "%f" "%B"\n %S %j %u > > [%d/%M/%Y:%h:%n:%j] "%r" %c %b "%f" "%B"\n > > > > thats it > > > > and btw. analog is running fine despite this error message ( this > > error message is showing up because my logs used to be in CLF format, > > and i changed it to combined format without deleting the old logs ). > > so now i set my config files to process the logs starting from the day > > the logs got combined, and the results are just great. > > > > so why isnt anlgform.pl working? > > > > i have everything set,. and as i said, i tried putting the anlgform > > files inside the wwwroot , and inside the cgi-bin with all the > > permissions set, but no luck > > > > > > now back to the shell > > > > i tried typing: > > > > ./anlgform.pl > > and i got > > (offline mode: enter name=value pairs on standard input) > > > > i also tried ./anlgform.pl qv=1 LOGFILE=~/logs/access_log > > REQINCLUDE=pages i got the following response Content-Type: text/plain > > > > CGI ON > > DNS NONE > > WARNINGS FL > > LOGFILE /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log > > REQINCLUDE pages OUTFILE stdout > > > > hmmm,, what else did i try.. > > > > yeah, i tried this command ( dont ask me why.. i simply didnt know > > what to try :) > > > > ./anlgform.pl - > > > > and poof. > > i got some html source dumped on my screen > > > > so i did ./anlgform.pl - >dump.htm > > > > and i viewed it in my browser, and that was a report similar to the > > outfile produced by analog. > > > > i seriously dont know what else shall i try. > > > > am i doing something wrong? > > > > where am i supposed to have analog installed? ( i have it in > > /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/ ) > > which is www.mydomain.com/ws > > > > i tried making the anlgform to work in the same directory as analog > > but it failed. i tried to move the anlgform.pl to my cgi-bin > > directory. and the same thing happened > > > > > > and yes. just as i am typing this email. i tried changing the logs so > > analog would use the logfile.log ( sample log gotten with the script > > ). and still the same problem > > > > can you please help me out? > > > > thanks in advanc
Re: [analog-help] analog works great, but anlgform turned my life misrable on apache server
2 cents worth ./. You know - I had a similar problem. For us, it turned out that Apache was timing out the page before analog had finished producing the output. By default, Apache times out after 5 minutes. Extend the timeout period in the Apache config files and you may find things work perfectly. ajb > hi > > i recently got analog v5.01 installed on my webhost`s Apache 1.3.14 > running on Red Hat Linux release 7.0 (Guinness) Kernel 2.2.16-22 on an > i686. > > my webhost supports virtually everything.. php,cgi,perl,ssi,etc > > installing analog and making it work was fairly easy ( took me 4 hours > to finish since i had tonnes of things to configure :) ) > > i can run ./analog from the shell command prompt. and it`ll produce a > sweet output file in the exact way that i want it :) > > the problem is in the anlgform.html and anlgform.pl > > i can never make them work no matter what. > > i have analog installed in a directory inside my httpdocs ( webroot ) > > whenever i try to use the form. i open the page anlgform.html, i > choose all my settings, and i click the button to generate the logs. i > get an error. > > this error is one of three. > > either 500. > or ERROR 305 -- The server stopped sending data. > or a strange ( cant find server ) like the page you get when either > your internet or the server is down. > > i checked my error logs. and i found only one thing > > /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/analog: > Warning L: Large number of corrupt lines in logfile > /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log: try > different LOGFORMAT (For help on all errors and warnings, see > docs/errors.html) > Current logfile format: > %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r%wHTTP%j" %c %b "%f" "%B"\n > %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r" %c %b "%f" "%B"\n %S %j %u > [%d/%M/%Y:%h:%n:%j] "%r" %c %b "%f" "%B"\n > > thats it > > and btw. analog is running fine despite this error message ( this > error message is showing up because my logs used to be in CLF format, > and i changed it to combined format without deleting the old logs ). > so now i set my config files to process the logs starting from the day > the logs got combined, and the results are just great. > > so why isnt anlgform.pl working? > > i have everything set,. and as i said, i tried putting the anlgform > files inside the wwwroot , and inside the cgi-bin with all the > permissions set, but no luck > > > now back to the shell > > i tried typing: > > ./anlgform.pl > and i got > (offline mode: enter name=value pairs on standard input) > > i also tried ./anlgform.pl qv=1 LOGFILE=~/logs/access_log > REQINCLUDE=pages i got the following response Content-Type: text/plain > > CGI ON > DNS NONE > WARNINGS FL > LOGFILE /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log > REQINCLUDE pages OUTFILE stdout > > hmmm,, what else did i try.. > > yeah, i tried this command ( dont ask me why.. i simply didnt know > what to try :) > > ./anlgform.pl - > > and poof. > i got some html source dumped on my screen > > so i did ./anlgform.pl - >dump.htm > > and i viewed it in my browser, and that was a report similar to the > outfile produced by analog. > > i seriously dont know what else shall i try. > > am i doing something wrong? > > where am i supposed to have analog installed? ( i have it in > /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/ ) > which is www.mydomain.com/ws > > i tried making the anlgform to work in the same directory as analog > but it failed. i tried to move the anlgform.pl to my cgi-bin > directory. and the same thing happened > > > and yes. just as i am typing this email. i tried changing the logs so > analog would use the logfile.log ( sample log gotten with the script > ). and still the same problem > > can you please help me out? > > thanks in advance > > > Regards > > Louis > > > +- > +--- > | This is the analog-help mailing list. To unsubscribe from this | > mailing list, go to | > http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List > archives are available at | > http://www.mail-archive.com/analog-help@lists.isite.net/ | > http://lists.isite.net/listgate/analog-help/archives/ | > http://www.tallylist.com/archives/index.cfm/mlist.7 > +- > --- Andrew Bennett Fileserver & Network Support CoOrdinator IT Services, The University of Queensland Library email: [EMAIL PROTECTED] phone: 3365 6722 + | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to |http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at |http://www.mail-archive.com/analog-help@lists.isite.net/ |http://lists.isite.net/listgate/a
[analog-help] analog works great, but anlgform turned my life misrable on apacheserver
hi i recently got analog v5.01 installed on my webhost`s Apache 1.3.14 running on Red Hat Linux release 7.0 (Guinness) Kernel 2.2.16-22 on an i686. my webhost supports virtually everything.. php,cgi,perl,ssi,etc installing analog and making it work was fairly easy ( took me 4 hours to finish since i had tonnes of things to configure :) ) i can run ./analog from the shell command prompt. and it`ll produce a sweet output file in the exact way that i want it :) the problem is in the anlgform.html and anlgform.pl i can never make them work no matter what. i have analog installed in a directory inside my httpdocs ( webroot ) whenever i try to use the form. i open the page anlgform.html, i choose all my settings, and i click the button to generate the logs. i get an error. this error is one of three. either 500. or ERROR 305 -- The server stopped sending data. or a strange ( cant find server ) like the page you get when either your internet or the server is down. i checked my error logs. and i found only one thing /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/analog: Warning L: Large number of corrupt lines in logfile /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log: try different LOGFORMAT (For help on all errors and warnings, see docs/errors.html) Current logfile format: %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r%wHTTP%j" %c %b "%f" "%B"\n %S %j %u [%d/%M/%Y:%h:%n:%j] "%j%w%r" %c %b "%f" "%B"\n %S %j %u [%d/%M/%Y:%h:%n:%j] "%r" %c %b "%f" "%B"\n thats it and btw. analog is running fine despite this error message ( this error message is showing up because my logs used to be in CLF format, and i changed it to combined format without deleting the old logs ). so now i set my config files to process the logs starting from the day the logs got combined, and the results are just great. so why isnt anlgform.pl working? i have everything set,. and as i said, i tried putting the anlgform files inside the wwwroot , and inside the cgi-bin with all the permissions set, but no luck now back to the shell i tried typing: ./anlgform.pl and i got (offline mode: enter name=value pairs on standard input) i also tried ./anlgform.pl qv=1 LOGFILE=~/logs/access_log REQINCLUDE=pages i got the following response Content-Type: text/plain CGI ON DNS NONE WARNINGS FL LOGFILE /usr/local/plesk/apache/vhosts/mydomain.com/logs/access_log REQINCLUDE pages OUTFILE stdout hmmm,, what else did i try.. yeah, i tried this command ( dont ask me why.. i simply didnt know what to try :) ./anlgform.pl - and poof. i got some html source dumped on my screen so i did ./anlgform.pl - >dump.htm and i viewed it in my browser, and that was a report similar to the outfile produced by analog. i seriously dont know what else shall i try. am i doing something wrong? where am i supposed to have analog installed? ( i have it in /usr/local/plesk/apache/vhosts/mydomain.com/httpdocs/ws/ ) which is www.mydomain.com/ws i tried making the anlgform to work in the same directory as analog but it failed. i tried to move the anlgform.pl to my cgi-bin directory. and the same thing happened and yes. just as i am typing this email. i tried changing the logs so analog would use the logfile.log ( sample log gotten with the script ). and still the same problem can you please help me out? thanks in advance Regards Louis + | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to |http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at |http://www.mail-archive.com/analog-help@lists.isite.net/ |http://lists.isite.net/listgate/analog-help/archives/ |http://www.tallylist.com/archives/index.cfm/mlist.7 +
list traffic volume was RE: [analog-help] help
Is it me, or has the volume of traffic on this list gone up tenfold in the past week? Any particular reason why? + | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to |http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at |http://www.mail-archive.com/analog-help@lists.isite.net/ |http://lists.isite.net/listgate/analog-help/archives/ |http://www.tallylist.com/archives/index.cfm/mlist.7 +
Re: [analog-help] getting rid of [no directory] in directory report
On 23 May 2001, at 14:39, Jeremy Wadsack wrote about Re: [analog-help] getting rid of [no directory] i: > > isn't that the root directory, with or without the homepage? > On http://www.statslab.cam.ac.uk/~sret1/stats/stats.html, that's > listed as [root directory]. well, considering that in Analog 4.13 [no directory] shows up in seven or eight .lng files - including usa.lng - Stephen should be able to tell us what's there for ;-) ciao Massimo + | This is the analog-help mailing list. To unsubscribe from this | mailing list, go to |http://lists.isite.net/listgate/analog-help/unsubscribe.html | | List archives are available at |http://www.mail-archive.com/analog-help@lists.isite.net/ |http://lists.isite.net/listgate/analog-help/archives/ |http://www.tallylist.com/archives/index.cfm/mlist.7 +
