Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-29 Thread Dick Visser 
I would try getting help from the authors of the redhat-cop repository
first, if only to make sure things can actually work (this is not known).

On Tue, 29 Sep 2020 at 09:06, Pankaj Basnal 
wrote:

>
> I logged in to the VMs when ansible got stuck and here are my findings -
> 1. I was able to login from the same container using same ssh keys.
> 2. The packages were installed successfully on the host machines and yet
> not confirmation was given from ansible on the host machine.
>
> I'm using the redhat-cop 
> /*ansible-role-jboss-common
>  *repo for
> setting up the host machine.
>
> Any specific logs that I should look for?
> On Friday, September 11, 2020 at 2:20:52 PM UTC+5:30 brae...@gmail.com
> wrote:
>
>> On 9/10/20 6:37 PM, Pankaj Basnal wrote:
>>
>>
>> > This playbook works with less number of hosts. As the number of hosts
>> increase the probability of error increases. There
>>
>>
>> > are a few runs which have completed successfully with less number of
>> hosts. Though I don't have logs for them.
>>
>>
>> > I'll take your suggestions and try without until and retry. But if the
>> problem is with the dictionary check then it
>>
>>
>> > would have failed for all the hosts. But it failed for only 1 host and
>> completed for the other 9.
>>
>>
>> >
>>
>>
>>
>>
>>
>> Yes that is correct .. success is a builtin test in Ansible.
>>
>>
>>
>>
>>
>> But at any rate when the package install fails, that's a problem of the
>> host (e.g. lack of resources,
>>
>>
>> installation problems) which need to be addressed instead of retrying the
>> installation.
>>
>>
>>
>>
>>
>> Regards
>>
>>
>> Racke
>>
>>
>>
>>
>>
>> > I can attach the complete log file if that helps
>>
>>
>> > On Thursday, September 10, 2020 at 9:22:08 PM UTC+5:30
>> dick@geant.org wrote:
>>
>>
>> >
>>
>>
>> > On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal 
>> wrote:
>>
>>
>> > >
>>
>>
>> > > Hi,
>>
>>
>> > > I'm new to ansible and I'm facing an issue with executing our
>> playbook.
>>
>>
>> > >
>>
>>
>> > > Setup-
>>
>>
>> > > * For 10 hosts on azure
>>
>>
>> > > * all hosts are identical and newly created
>>
>>
>> > > * ansible.cfg-
>>
>>
>> > > [defaults]
>>
>>
>> > > host_key_checking = False
>>
>>
>> > >
>>
>>
>> > > * portion of playbook that is installing packages
>>
>>
>> > >
>>
>>
>> > > - name: Set Initscripts to be Installed
>>
>>
>> > > set_fact:
>>
>>
>> > > packages_to_install: "{{ packages_to_install | default([]) + [
>> 'initscripts' ] }}"
>>
>>
>> >
>>
>>
>> > IIRC this should not work - it will get into an endless loop.
>>
>>
>> >
>>
>>
>> > This may or may not be your problem.
>>
>>
>> > It occurs elsewhere below as well.
>>
>>
>> >
>>
>>
>> > --
>>
>>
>> > You received this message because you are subscribed to the Google
>> Groups "Ansible Project" group.
>>
>>
>> > To unsubscribe from this group and stop receiving emails from it, send
>> an email to
>>
>>
>> > ansible-proje...@googlegroups.com > ansible-proje...@googlegroups.com>.
>>
>>
>> > To view this discussion on the web visit
>>
>>
>> >
>> https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com
>>
>>
>> > <
>> https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com?utm_medium=email_source=footer
>> >.
>>
>>
>>
>>
>>
>>
>>
>>
>> --
>>
>>
>> Ecommerce and Linux consulting + Perl and web application programming.
>>
>>
>> Debian and Sympa administration. Provisioning with Ansible.
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>
>
> --
>
>
> You received this message because you are subscribed to the Google Groups
> "Ansible Project" group.
>
>
> To unsubscribe from this group and stop receiving emails from it, send an
> email to ansible-project+unsubscr...@googlegroups.com.
>
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ansible-project/1ae9770e-3e6c-4ed6-b367-53312a3d4963n%40googlegroups.com
> 
> .
>
>
> --
Sent from a mobile device - please excuse the brevity, spelling and
punctuation.

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/CAL8fbwNue0Wq3JcOvv%2BJC-iohPVyuA8EYCXr_Pfmc9h1sBPvng%40mail.gmail.com.

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-29 Thread Pankaj Basnal 
Any reason why this would get stuck in endless loop? 

I'm using the redhat-cop 
/*ansible-role-jboss-common 
 *repo for setting 
up the host machine. 
On Thursday, September 10, 2020 at 9:22:08 PM UTC+5:30 dick@geant.org 
wrote:

> On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal  wrote:
> >
> > Hi,
> > I'm new to ansible and I'm facing an issue with executing our playbook.
> >
> > Setup-
> > * For 10 hosts on azure
> > * all hosts are identical and newly created
> > * ansible.cfg-
> > [defaults]
> > host_key_checking = False
> >
> > * portion of playbook that is installing packages
> >
> > - name: Set Initscripts to be Installed
> > set_fact:
> > packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
>
> IIRC this should not work - it will get into an endless loop.
>
> This may or may not be your problem.
> It occurs elsewhere below as well.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/f8c2e831-9fb1-437c-b643-42f42301806en%40googlegroups.com.

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-29 Thread Pankaj Basnal 

I logged in to the VMs when ansible got stuck and here are my findings -
1. I was able to login from the same container using same ssh keys.
2. The packages were installed successfully on the host machines and yet 
not confirmation was given from ansible on the host machine.

I'm using the redhat-cop 
/*ansible-role-jboss-common 
 *repo for setting 
up the host machine.

Any specific logs that I should look for?
On Friday, September 11, 2020 at 2:20:52 PM UTC+5:30 brae...@gmail.com 
wrote:

> On 9/10/20 6:37 PM, Pankaj Basnal wrote:
> > This playbook works with less number of hosts. As the number of hosts 
> increase the probability of error increases. There
> > are a few runs which have completed successfully with less number of 
> hosts. Though I don't have logs for them.
> > I'll take your suggestions and try without until and retry. But if the 
> problem is with the dictionary check then it
> > would have failed for all the hosts. But it failed for only 1 host and 
> completed for the other 9. 
> > 
>
> Yes that is correct .. success is a builtin test in Ansible.
>
> But at any rate when the package install fails, that's a problem of the 
> host (e.g. lack of resources,
> installation problems) which need to be addressed instead of retrying the 
> installation.
>
> Regards
> Racke
>
> > I can attach the complete log file if that helps
> > On Thursday, September 10, 2020 at 9:22:08 PM UTC+5:30 
> dick@geant.org wrote:
> > 
> > On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal  
> wrote:
> > >
> > > Hi,
> > > I'm new to ansible and I'm facing an issue with executing our playbook.
> > >
> > > Setup-
> > > * For 10 hosts on azure
> > > * all hosts are identical and newly created
> > > * ansible.cfg-
> > > [defaults]
> > > host_key_checking = False
> > >
> > > * portion of playbook that is installing packages
> > >
> > > - name: Set Initscripts to be Installed
> > > set_fact:
> > > packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
> > 
> > IIRC this should not work - it will get into an endless loop.
> > 
> > This may or may not be your problem.
> > It occurs elsewhere below as well.
> > 
> > -- 
> > You received this message because you are subscribed to the Google 
> Groups "Ansible Project" group.
> > To unsubscribe from this group and stop receiving emails from it, send 
> an email to
> > ansible-proje...@googlegroups.com  ansible-proje...@googlegroups.com>.
> > To view this discussion on the web visit
> > 
> https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com
> > <
> https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com?utm_medium=email_source=footer
> >.
>
>
> -- 
> Ecommerce and Linux consulting + Perl and web application programming.
> Debian and Sympa administration. Provisioning with Ansible.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/1ae9770e-3e6c-4ed6-b367-53312a3d4963n%40googlegroups.com.

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-11 Thread Stefan Hornburg (Racke) 
On 9/10/20 6:37 PM, Pankaj Basnal wrote:
> This playbook works with less number of hosts. As the number of hosts 
> increase the probability of error increases. There
> are a few runs which have completed successfully with less number of hosts. 
> Though I don't have logs for them.
> I'll take your suggestions and try without until and retry. But if the 
> problem is with the dictionary check then it
> would have failed for all the hosts. But it failed for only 1 host and 
> completed for the other 9. 
> 

Yes that is correct .. success is a builtin test in Ansible.

But at any rate when the package install fails, that's a problem of the host 
(e.g. lack of resources,
installation problems) which need to be addressed instead of retrying the 
installation.

Regards
 Racke

> I can attach the complete log file if that helps
> On Thursday, September 10, 2020 at 9:22:08 PM UTC+5:30 dick@geant.org 
> wrote:
> 
> On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal  wrote:
> >
> > Hi,
> > I'm new to ansible and I'm facing an issue with executing our playbook.
> >
> > Setup-
> > * For 10 hosts on azure
> > * all hosts are identical and newly created
> > * ansible.cfg-
> > [defaults]
> > host_key_checking = False
> >
> > * portion of playbook that is installing packages
> >
> > - name: Set Initscripts to be Installed
> > set_fact:
> > packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
> 
> IIRC this should not work - it will get into an endless loop.
> 
> This may or may not be your problem.
> It occurs elsewhere below as well.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Ansible Project" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to
> ansible-project+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com
> .


-- 
Ecommerce and Linux consulting + Perl and web application programming.
Debian and Sympa administration. Provisioning with Ansible.

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/68edd28e-6d5e-0570-7a85-6673b1dba135%40linuxia.de.


signature.asc
Description: OpenPGP digital signature

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-10 Thread Prasad Shetty 
There are multiple way to improve the performance. I have noticed multiple
time yum ansible module slow down the performance.

Try to use the pipelining or mitogen

Please refer the below URL


https://www.toptechskills.com/ansible-tutorials-courses/speed-up-ansible-playbooks-pipelining-mitogen/#


On Thu, 10 Sep, 2020, 8:59 pm Pankaj Basnal, 
wrote:

> Hi,
> I'm new to ansible and I'm facing an issue with executing our playbook.
>
> Setup-
> * For 10 hosts on azure
> * all hosts are identical and newly created
> * ansible.cfg-
> [defaults]
>   host_key_checking = False
>
> * portion of playbook that is installing packages
>
> - name: Set Initscripts to be Installed
>   set_fact:
>
> packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
>   tags:
> - common
>   when: ansible_distribution_major_version is version_compare('7', '<')
>
> - name: Set Java to be Installed
>   set_fact:
>
> packages_to_install: "{{ packages_to_install | default([]) + [ 
> jboss_java_pkg_name ] }}"
>   when: install_java|bool
>   tags:
> - common
>
> - name: Set Unzip to be Installed
>   set_fact:
>
> packages_to_install: "{{ packages_to_install | default([]) + [ 'unzip' ] 
> }}"
>   tags:
> - common
>
> - name: Install packages
>   package:
> name: "{{ packages_to_install }}"
> state: present
>   register: packages_result
>   retries: 5
>   until: packages_result is success
>
> At the step of package installation, ansible will freeze without any log
> output for 2 hours and then finally it will throw ssh connection error that
> host is unreachable.
>
> Logs of the run
> * 9/8/2020 8:18:08 PM : "download_only": false,
>
> * 9/8/2020 8:18:20 PM : 17403 1599576500.81986: _low_level_execute_command(): 
> executing: /bin/sh -c 'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.5-17403-228811267706642/ > 
> /dev/null 2>&1 && sleep 0'
> * 9/8/2020 8:18:20 PM : >>><<<
>
> * 9/8/2020 8:18:20 PM : 17403 1599576500.86101: attempt loop complete, 
> returning result
> * 9/8/2020 8:18:20 PM : 17403 1599576500.86111: dumping result to json
> * 9/8/2020 8:18:20 PM : "invocation": {
> * 9/8/2020 8:18:20 PM : "update_cache": false,
>
> * 9/8/2020 8:18:20 PM : "unzip-6.0-21.el7.x86_64 providing unzip is already 
> installed",
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50669: stderr chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>>Shared connection to 52.225.188.39 closed.
> * 9/8/2020 10:28:42 PM : <<<
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50769: stderr chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>><<<
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50780: stdout chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>><<<
>
> * 9/8/2020 10:28:42 PM : <52.225.188.39> (255, '', 'Shared connection to 
> 52.225.188.39 closed.\r\n')
>
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50832: 
> _low_level_execute_command(): starting
>
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50843: 
> _low_level_execute_command(): executing: /bin/sh -c 'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.86-17410-193336400580842/ > 
> /dev/null 2>&1 && sleep 0'
>
> * 9/8/2020 10:28:42 PM : <52.225.188.39> ESTABLISH SSH CONNECTION FOR USER: 
> wbuser
>
> * 9/8/2020 10:28:42 PM : <52.225.188.39> SSH: EXEC ssh -C -o 
> ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o 
> Port=33000 -o 'IdentityFile="/tmp/AnsibleFiles/id_rsa"' -o 
> KbdInteractiveAuthentication=no -o 
> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o 
> PasswordAuthentication=no -o 'User="wbuser"' -o ConnectTimeout=10 -o 
> StrictHostKeyChecking=no -o ControlPath=/root/.ansible/cp/cccd982d88 
> 52.225.188.39 '/bin/sh -c '"'"'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.86-17410-193336400580842/ > 
> /dev/null 2>&1 && sleep 0'"'"''
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14653: stderr chunk (state=2):
> * 9/8/2020 10:28:43 PM : >>><<<
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14667: stdout chunk (state=2):
> * 9/8/2020 10:28:43 PM : >>><<<
> * 9/8/2020 10:28:43 PM : <52.225.188.39> (0, '', '')
>
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14703: _low_level_execute_command() 
> done: rc=0, stdout=, stderr=
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14742: _execute() done
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14745: dumping result to json
>
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14750: done dumping result, 
> returning
>
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14777: done running TaskExecutor() 
> for JbossEAP-26/TASK: jboss_common_role : Install packages 
> [000d3ae7-f205-69c8-6cc1-00c9]
>
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14799: sending task result for task 
> 000d3ae7-f205-69c8-6cc1-00c9
>
> * 9/8/2020 10:28:43 PM : 17410 1599584323.15331: done sending task result for 
> task 000d3ae7-f205-69c8-6cc1-00c9
> * 9/8/2020 10:28:43 PM : 17410 1599584323.15339: WORKER PROCESS EXITING
> * 9/8/2020 10:28:43 PM

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-10 Thread Pankaj Basnal 
This playbook works with less number of hosts. As the number of hosts 
increase the probability of error increases. There are a few runs which 
have completed successfully with less number of hosts. Though I don't have 
logs for them.
I'll take your suggestions and try without until and retry. But if the 
problem is with the dictionary check then it would have failed for all the 
hosts. But it failed for only 1 host and completed for the other 9. 

I can attach the complete log file if that helps
On Thursday, September 10, 2020 at 9:22:08 PM UTC+5:30 dick@geant.org 
wrote:

> On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal  wrote:
> >
> > Hi,
> > I'm new to ansible and I'm facing an issue with executing our playbook.
> >
> > Setup-
> > * For 10 hosts on azure
> > * all hosts are identical and newly created
> > * ansible.cfg-
> > [defaults]
> > host_key_checking = False
> >
> > * portion of playbook that is installing packages
> >
> > - name: Set Initscripts to be Installed
> > set_fact:
> > packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
>
> IIRC this should not work - it will get into an endless loop.
>
> This may or may not be your problem.
> It occurs elsewhere below as well.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/2e0b338b-7b94-46b2-80fa-20267b167d65n%40googlegroups.com.

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-10 Thread Dick Visser 
On Thu, 10 Sep 2020 at 17:29, Pankaj Basnal  wrote:
>
> Hi,
> I'm new to ansible and I'm facing an issue with executing our playbook.
>
> Setup-
> * For 10 hosts on azure
> * all hosts are identical and newly created
> * ansible.cfg-
> [defaults]
>   host_key_checking = False
>
> * portion of playbook that is installing packages
>
> - name: Set Initscripts to be Installed
>   set_fact:
> packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"

IIRC this should not work - it will get into an endless loop.

This may or may not be your problem.
It occurs elsewhere below as well.

-- 
You received this message because you are subscribed to the Google Groups 
"Ansible Project" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ansible-project+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ansible-project/CAL8fbwOBjULa9Sxqz%3DQy%2BRwMVD2pZ3Vn701Su1AWGUNmDY5onA%40mail.gmail.com.

Re: [ansible-project] Ansible hangs on package installation for hours before connection to host is lost

2020-09-10 Thread Stefan Hornburg (Racke) 
On 9/10/20 5:29 PM, Pankaj Basnal wrote:
> Hi,
> I'm new to ansible and I'm facing an issue with executing our playbook. 
> 
> Setup-
> * For 10 hosts on azure
> * all hosts are identical and newly created
> * ansible.cfg- 
>     [defaults]
>           host_key_checking = False
> 
> * portion of playbook that is installing packages
> 
> - name: Set Initscripts to be Installed
>   set_fact:
> packages_to_install: "{{ packages_to_install | default([]) + [ 
> 'initscripts' ] }}"
>   tags:
> - common
>   when: ansible_distribution_major_version is version_compare('7', '<')
> 
> - name: Set Java to be Installed
>   set_fact:
> packages_to_install: "{{ packages_to_install | default([]) + [ 
> jboss_java_pkg_name ] }}"
>   when: install_java|bool
>   tags:
> - common
> 
> - name: Set Unzip to be Installed
>   set_fact:
> packages_to_install: "{{ packages_to_install | default([]) + [ 'unzip' ] 
> }}"
>   tags:
> - common
> 
> - name: Install packages
>   package:
> name: "{{ packages_to_install }}"
> state: present
>   register: packages_result
>   retries: 5
>   until: packages_result is success

There is really no point to retrying package installation. Better look at the 
output when it fails first.

Also your until: condition compares a dict with a variable named success. So it 
will never return a true
value.

Regards
 Racke

> 
> At the step of package installation, ansible will freeze without any log 
> output for 2 hours and then finally it will
> throw ssh connection error that host is unreachable.
> 
> Logs of the run
> * 9/8/2020 8:18:08 PM : "download_only": false,
> * 9/8/2020 8:18:20 PM : 17403 1599576500.81986: _low_level_execute_command(): 
> executing: /bin/sh -c 'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.5-17403-228811267706642/ > 
> /dev/null 2>&1 && sleep 0'
> * 9/8/2020 8:18:20 PM : >>><<<
> * 9/8/2020 8:18:20 PM : 17403 1599576500.86101: attempt loop complete, 
> returning result
> * 9/8/2020 8:18:20 PM : 17403 1599576500.86111: dumping result to json
> * 9/8/2020 8:18:20 PM : "invocation": {
> * 9/8/2020 8:18:20 PM : "update_cache": false,
> * 9/8/2020 8:18:20 PM : "unzip-6.0-21.el7.x86_64 providing unzip is already 
> installed",
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50669: stderr chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>>Shared connection to 52.225.188.39 closed.
> * 9/8/2020 10:28:42 PM : <<<
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50769: stderr chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>><<<
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50780: stdout chunk (state=3):
> * 9/8/2020 10:28:42 PM : >>><<<
> * 9/8/2020 10:28:42 PM : <52.225.188.39> (255, '', 'Shared connection to 
> 52.225.188.39 closed.\r\n')
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50832: 
> _low_level_execute_command(): starting
> * 9/8/2020 10:28:42 PM : 17410 1599584322.50843: 
> _low_level_execute_command(): executing: /bin/sh -c 'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.86-17410-193336400580842/ > 
> /dev/null 2>&1 && sleep 0'
> * 9/8/2020 10:28:42 PM : <52.225.188.39> ESTABLISH SSH CONNECTION FOR USER: 
> wbuser
> * 9/8/2020 10:28:42 PM : <52.225.188.39> SSH: EXEC ssh -C -o 
> ControlMaster=auto -o ControlPersist=60s -o StrictHostKeyChecking=no -o 
> Port=33000 -o 'IdentityFile="/tmp/AnsibleFiles/id_rsa"' -o 
> KbdInteractiveAuthentication=no -o 
> PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey -o 
> PasswordAuthentication=no -o 'User="wbuser"' -o ConnectTimeout=10 -o 
> StrictHostKeyChecking=no -o ControlPath=/root/.ansible/cp/cccd982d88 
> 52.225.188.39 '/bin/sh -c '"'"'rm -f -r 
> /home/wbuser/.ansible/tmp/ansible-tmp-1599576402.86-17410-193336400580842/ > 
> /dev/null 2>&1 && sleep 0'"'"''
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14653: stderr chunk (state=2):
> * 9/8/2020 10:28:43 PM : >>><<<
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14667: stdout chunk (state=2):
> * 9/8/2020 10:28:43 PM : >>><<<
> * 9/8/2020 10:28:43 PM : <52.225.188.39> (0, '', '')
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14703: _low_level_execute_command() 
> done: rc=0, stdout=, stderr=
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14742: _execute() done
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14745: dumping result to json
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14750: done dumping result, 
> returning
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14777: done running TaskExecutor() 
> for JbossEAP-26/TASK: jboss_common_role : Install packages 
> [000d3ae7-f205-69c8-6cc1-00c9]
> * 9/8/2020 10:28:43 PM : 17410 1599584323.14799: sending task result for task 
> 000d3ae7-f205-69c8-6cc1-00c9
> * 9/8/2020 10:28:43 PM : 17410 1599584323.15331: done sending task result for 
> task 000d3ae7-f205-69c8-6cc1-00c9
> * 9/8/2020 10:28:43 PM : 17410 1599584323.15339: WORKER PROCESS EXITING
> * 9/8/2020 10:28:43 PM : fatal: [JbossEAP-26]: UNREACHABLE! => {
> * 9/8/2020 10:28:43 PM : "changed": false,