[fedora-arm] Re: Fedora on Rock 5B
> What's not working at the moment: > - accelerate GPU > > - sound via 3,5 mm Headphone Both of the above are known. > - Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa > wireless A8) And I think that is too because the USB isn't plumbed through to the M2-E slot yet (see the link I referenced). > > Greetings > > Andreas > > Am 16.02.24 um 7:12 PM schrieb Peter Robinson: > > Hi Folks, > > It's in my backlog of devices to play with for F-39. > > It looks like it's not finding the storage, you don't mention what sort of > storage you're trying to run Fedora from, is it the SD card or do you have > the firmware on SD and Fedora on something else? > > So I've finally started to look at this and yes, it looks like there's > issues with the SD card in Linux although apparently it should be > supported. I will be looking at that over the weekend. > > I need to find a spare NVME drive to put in it. > > The plan is to have some level of support in Fedora 40. > > The upstream status as documented here is a pretty good overview of > where we're at upstream: > https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md > > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: > > Hi there, > I've tried to install Fedora on my Rock 5 without success. > > Booting with > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img > on SD-Card and source from > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. > > Board boots up fine but later starting in loop with > 350.456154] dracut-initqueue[1065]: Warning: # Anaconda > installer errors end ### > [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: > timeout, still waiting for following initqueue hooks: > [ 352.161387] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e > "/dev/root" ]" > [ 352.164564] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" > -ge "10" ]" > [ 352.167716] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f > /tmp/settle.done ]" > [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: > starting timeout scripts > [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda > installer errors begin # > [ 352.172852] dracut-initqueue[1065]: Warning: # > # > [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot > has failed. Possible causes include > [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or > inst.repo boot parameters on the > [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please > verify that you have specified > [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo. > [ 352.173918] dracut-initqueue[1065]: Warning: Please also note that > the 'inst.' prefix is now mandatory. > [ 352.174156] dracut-initqueue[1065]: Warning: # > # > [ 352.174354] dracut-initqueue[1065]: Warning: Installer > errors encountered during boot: > [ 352.174543] dracut-initqueue[1065]: Warning: # > # > [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown > [ 352.174970] dracut-initqueue[1065]: Warning: # > # > > Full log file: see rock.txt > > Has anybody more succcess ? > > Greetings > Andreas___ > arm mailing list -- arm@lists.fedoraproject.org > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org > Do not reply to spam, report it: > https://pagure.io/fedora-infrastructure/new_issue > > -- > ___ > arm mailing list -- arm@lists.fedoraproject.org > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org > Do not reply to spam, report it: > https://pagure.io/fedora-infrastructure/new_issue > > -- > ___ > arm mailing list -- arm@lists.fedoraproject.org > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List
[fedora-arm] Re: Fedora on Rock 5B
Hello Peter, update from my side: booting with the last version v0.9.1 from https://github.com/edk2-porting/edk2-rk3588/releases/ and actual Fedora 40 Rawhide the installation works fine. I'm writing this mail from this SBC. root@rockpi5:~# inxi -F System: Host:rockpi5.reschke.lan Kernel:6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64 arch:aarch64 bits:64 Console:pty pts/1 Distro:Fedora Linux 41 (Rawhide Prerelease) Machine: Type:Embedded-pc Mobo:Radxa model:ROCK 5 Model B serial:386F0C585A66D216 UEFI:EDK II v:0.9.1 date:10/12/2023 CPU: Info:triple core model:N/A bits:64 type:MT MCP cache:L2:2.5 MiB Speed:N/A min/max:N/A cores:No per core speed data found. Graphics: Message:No PCI device data found. Display:server:X.Org v:23.2.4 with:Xwayland v:23.2.4 driver:X: loaded:modesetting dri:swrast gpu:N/A resolution:1920x1080~60Hz API:EGL v:1.5 drivers:kms_swrast,swrast platforms:gbm,x11,surfaceless,device API:OpenGL v:4.5 vendor:mesa v:24.0.0 renderer:llvmpipe (LLVM 17.0.6 128 bits) API:Vulkan v:1.3.268 drivers:llvmpipe surfaces:xcb,xlib Audio: Message:No device data found. API:ALSA v:k6.8.0-0.rc4.20240214git7e90b5c295ec.37.fc41.aarch64 status:kernel-api Network: Device-1:Realtek RTL8852BE PCIe 802.11ax Wireless Network driver:rtw89_8852be IF:wlP2p1s0 state:up mac:2c:05:47:8f:e9:e1 Device-2:Realtek RTL8125 2.5GbE driver:r8169 IF:enP4p1s0 state:up speed:1000 Mbps duplex:full mac:00:e0:4c:68:00:cd Bluetooth: Device-1:Cambridge Silicon Radio Bluetooth Dongle (HCI mode) driver:btusb type:USB Report:btmgmt ID:hci0 state:up address:00:1B:DC:0F:6E:EF bt-v:2.1 Drives: Local Storage:total:953.87 GiB used:21.93 GiB (2.3%) ID-1:/dev/nvme0n1 vendor:Samsung model:MZVKW1T0HMLH-000H1 size:953.87 GiB Partition: ID-1:/ size:14.94 GiB used:10.23 GiB (68.5%) fs:xfs dev:/dev/dm-0 ID-2:/boot size:960 MiB used:413.3 MiB (43.1%) fs:xfs dev:/dev/nvme0n1p2 ID-3:/boot/efi size:598.8 MiB used:11.7 MiB (1.9%) fs:vfat dev:/dev/nvme0n1p1 ID-4:/home size:99.94 GiB used:11.29 GiB (11.3%) fs:xfs dev:/dev/dm-1 Swap: ID-1:swap-1 type:zram size:8 GiB used:0 KiB (0.0%) dev:/dev/zram0 Sensors: Src:lm-sensors+/sys Message:No sensor data found using /sys/class/hwmon or lm-sensors. Info: Memory:total:16 GiB note:est. available:15.3 GiB used:6.18 GiB (40.4%) Processes:272 Uptime:5h 50m Shell:Bash inxi:3.3.32 root@rockpi5:~# What's not working at the moment: - accelerate GPU - sound via 3,5 mm Headphone - Bluetooth via Realtek RTL8852BE PCIe 802.11ax Wireless Network (Radxa wireless A8) Greetings Andreas Am 16.02.24 um 7:12 PM schrieb Peter Robinson: Hi Folks, It's in my backlog of devices to play with for F-39. It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else? So I've finally started to look at this and yes, it looks like there's issues with the SD card in Linux although apparently it should be supported. I will be looking at that over the weekend. I need to find a spare NVME drive to put in it. The plan is to have some level of support in Fedora 40. The upstream status as documented here is a pretty good overview of where we're at upstream: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: Hi there, I've tried to install Fedora on my Rock 5 without success. Booting with https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img on SD-Card and source from https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. Board boots up fine but later starting in loop with 350.456154] dracut-initqueue[1065]: Warning: # Anaconda installer errors end ### [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 352.161387] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]" [ 352.164564] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]" [ 352.167716] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]" [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda installer errors begin # [ 352.172852] dracut-initqueue[1065]: Warning: # # [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the [ 352.173537] dracut-initqueue[1065]: Warning: kernel
[fedora-arm] Re: Fedora on Rock 5B
Hi Folks, > It's in my backlog of devices to play with for F-39. > > It looks like it's not finding the storage, you don't mention what sort of > storage you're trying to run Fedora from, is it the SD card or do you have > the firmware on SD and Fedora on something else? So I've finally started to look at this and yes, it looks like there's issues with the SD card in Linux although apparently it should be supported. I will be looking at that over the weekend. I need to find a spare NVME drive to put in it. The plan is to have some level of support in Fedora 40. The upstream status as documented here is a pretty good overview of where we're at upstream: https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-rockchip-3588/-/blob/main/mainline-status.md > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: >> >> Hi there, >> I've tried to install Fedora on my Rock 5 without success. >> >> Booting with >> https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img >> on SD-Card and source from >> https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. >> >> Board boots up fine but later starting in loop with >> 350.456154] dracut-initqueue[1065]: Warning: # Anaconda >> installer errors end ### >> [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: >> timeout, still waiting for following initqueue hooks: >> [ 352.161387] dracut-initqueue[1065]: Warning: >> /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e >> "/dev/root" ]" >> [ 352.164564] dracut-initqueue[1065]: Warning: >> /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" >> -ge "10" ]" >> [ 352.167716] dracut-initqueue[1065]: Warning: >> /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f >> /tmp/settle.done ]" >> [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: >> starting timeout scripts >> [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda >> installer errors begin # >> [ 352.172852] dracut-initqueue[1065]: Warning: # >> # >> [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot >> has failed. Possible causes include >> [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or >> inst.repo boot parameters on the >> [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please >> verify that you have specified >> [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo. >> [ 352.173918] dracut-initqueue[1065]: Warning: Please also note that >> the 'inst.' prefix is now mandatory. >> [ 352.174156] dracut-initqueue[1065]: Warning: # >> # >> [ 352.174354] dracut-initqueue[1065]: Warning: Installer >> errors encountered during boot: >> [ 352.174543] dracut-initqueue[1065]: Warning: # >> # >> [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown >> [ 352.174970] dracut-initqueue[1065]: Warning: # >> # >> >> Full log file: see rock.txt >> >> Has anybody more succcess ? >> >> Greetings >> Andreas___ >> arm mailing list -- arm@lists.fedoraproject.org >> To unsubscribe send an email to arm-le...@lists.fedoraproject.org >> Fedora Code of Conduct: >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ >> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines >> List Archives: >> https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org >> Do not reply to spam, report it: >> https://pagure.io/fedora-infrastructure/new_issue -- ___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
[fedora-arm] Re: Fedora on Rock 5B
Hello, today I've tried once again to install Fedora on Rock 5B. It works !! Even with GUI! What you need: 1) https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.9.1/rock-5b_UEFI_Release_v0.9.1.img dd this Image on a SD-Card 2) https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20231113.n.0.iso dd this Image on a USB stick Put both in your Rock 5B and boot. I've done the Net-install installation with KDE Wayland. The SD-Card with UEFI is needed for booting. Don't know if it's possible to write it to the Firmware or somewhere else. After a first check not working: - Sound - Bluetooth working - Fan for CPU - WIFI - NVME oot@rockpi5:~# lsblk -f NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS zram0 [SWAP] nvme0n1 ├─nvme0n1p1 vfat FAT32 F81B-9757 588M 2% /boot/efi ├─nvme0n1p2 xfs 0fa12a00-a5e6-4063-b5d9-a6bbb8e5d324 711,5M 26% /boot └─nvme0n1p3 LVM2_member LVM2 001 6X90NM-HSY9-mFxU-AmZs-aBwa-53sW-OeWx6m ├─fedora-root xfs 900a06a9-f39b-45ee-b088-439a4088693c 6,1G 59% / └─fedora-homelv xfs cc8dcc56-38ac-4ac2-9c0c-332b89044974 95,4G 5% /home root@rockpi5:~# lspci :01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961/SM963 0002:01:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b852 0004:01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05) root@rockpi5:~# lsmod | sort bluetooth 897024 17 btrtl,btmtk,btintel,btbcm,bnep,btusb,rfcomm bnep 32768 2 btbcm 24576 1 btusb btintel 57344 1 btusb btmtk 16384 1 btusb btrtl 32768 1 btusb btusb 77824 0 cfg80211 1073152 3 rtw89_8852b,rtw89_core,mac80211 crct10dif_ce 12288 1 dm_multipath 45056 0 fat 94208 1 vfat fuse 180224 3 ghash_ce 20480 0 ip_set 61440 0 joydev 32768 0 libarc4 12288 1 mac80211 loop 36864 0 mac80211 1282048 2 rtw89_core,rtw89_pci Module Size Used by nf_conntrack 180224 2 nf_nat,nft_ct nf_defrag_ipv4 12288 1 nf_conntrack nf_defrag_ipv6 24576 1 nf_conntrack nf_nat 57344 1 nft_chain_nat nfnetlink 20480 3 nf_tables,ip_set nf_reject_ipv4 16384 1 nft_reject_inet nf_reject_ipv6 24576 1 nft_reject_inet nf_tables 286720 391 nft_ct,nft_reject_inet,nft_fib_ipv6,nft_fib_ipv4,nft_chain_nat,nft_reject,nft_fib,nft_fib_inet nft_chain_nat 12288 3 nft_ct 20480 7 nft_fib 12288 3 nft_fib_ipv6,nft_fib_ipv4,nft_fib_inet nft_fib_inet 12288 1 nft_fib_ipv4 12288 1 nft_fib_inet nft_fib_ipv6 12288 1 nft_fib_inet nft_reject 12288 1 nft_reject_inet nft_reject_inet 12288 16 nvme 57344 4 nvme_core 176128 5 nvme ohci_hcd 61440 1 ohci_platform ohci_platform 12288 0 polyval_ce 12288 0 polyval_generic 12288 1 polyval_ce qrtr 45056 4 r8169 110592 0 rfcomm 98304 0 rfkill 40960 8 bluetooth,cfg80211 rtw89_8852b 368640 1 rtw89_8852be rtw89_8852be 12288 0 rtw89_core 495616 2 rtw89_8852b,rtw89_pci rtw89_pci 69632 1 rtw89_8852be scsi_dh_alua 24576 0 scsi_dh_emc 12288 0 scsi_dh_rdac 16384 0 snd 131072 5 snd_seq,snd_seq_device,snd_timer snd_hrtimer 12288 1 snd_seq 110592 7 snd_seq_dummy snd_seq_device 16384 1 snd_seq snd_seq_dummy 12288 0 snd_timer 49152 2 snd_seq,snd_hrtimer soundcore 16384 1 snd sunrpc 733184 1 uinput 24576 0 vfat 20480 1 xfs 2199552 3 xhci_plat_hcd 20480 0 zram 32768 2 root@rockpi5:~# Don't know what driver for graphic is used. System isn't fast as the Armbian version, but hey it's working. Andreas Am 01.08.23 um 08:27 schrieb Andreas Reschke: Thank you Peter, so we have to wait. I will try it again at the end of the year. Greetings Andreas Am 01.08.23 um 00:06 schrieb Peter Robinson: Hi Andreas, It's in my backlog of devices to play with for F-39. It looks like it's not finding the storage, you don't mention
[fedora-arm] Re: Fedora on Rock 5B
Thank you Peter, so we have to wait. I will try it again at the end of the year. Greetings Andreas Am 01.08.23 um 00:06 schrieb Peter Robinson: Hi Andreas, It's in my backlog of devices to play with for F-39. It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else? Peter Hello Peter, UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick and NVME disc are available for storage. So a quick look on upstream lists it doesn't look like USB [1] or either of the PCI controllers [2][3], there's two different ones, have yet made it upstream as yet. so ATM without a custom kernel I wouldn't expect it to work for either USB or NVME storage. The patch set for the USB support isn't upstream yet and it'll only support the upper USB3 port until they land another driver. On the plus side it looks like both the pcie patch sets are headed towards the 6.6 merge window. Looking at upstream DTs for the Rock5B it looks like it's just the mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like even the ethernet works. I think out of the box we probably won't be usable until F-40 for this device. I have seen a lot posted upstream, it seems a lot of that hasn't actually landed yet though. Peter [1] https://www.spinics.net/lists/linux-usb/msg244163.html [2] https://www.spinics.net/lists/linux-pci/msg141988.html [3] https://www.spinics.net/lists/linux-pci/msg141465.html On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: Hi there, I've tried to install Fedora on my Rock 5 without success. Booting with https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img on SD-Card and source from https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. Board boots up fine but later starting in loop with 350.456154] dracut-initqueue[1065]: Warning: # Anaconda installer errors end ### [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 352.161387] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]" [ 352.164564] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]" [ 352.167716] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]" [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda installer errors begin # [ 352.172852] dracut-initqueue[1065]: Warning: # # [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo. [ 352.173918] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory. [ 352.174156] dracut-initqueue[1065]: Warning: # # [ 352.174354] dracut-initqueue[1065]: Warning: Installer errors encountered during boot: [ 352.174543] dracut-initqueue[1065]: Warning: # # [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown [ 352.174970] dracut-initqueue[1065]: Warning: # # Full log file: see rock.txt Has anybody more succcess ? Greetings Andreas___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue ___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
[fedora-arm] Re: Fedora on Rock 5B
Hi Andreas, > > It's in my backlog of devices to play with for F-39. > > > > It looks like it's not finding the storage, you don't mention what > > sort of storage you're trying to run Fedora from, is it the SD card or > > do you have the firmware on SD and Fedora on something else? > > > > Peter > > Hello Peter, > UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick > and NVME disc are available for storage. So a quick look on upstream lists it doesn't look like USB [1] or either of the PCI controllers [2][3], there's two different ones, have yet made it upstream as yet. so ATM without a custom kernel I wouldn't expect it to work for either USB or NVME storage. The patch set for the USB support isn't upstream yet and it'll only support the upper USB3 port until they land another driver. On the plus side it looks like both the pcie patch sets are headed towards the 6.6 merge window. Looking at upstream DTs for the Rock5B it looks like it's just the mSD/eMMC storage that's enabled as of 6.5-rc4, it doesn't look like even the ethernet works. I think out of the box we probably won't be usable until F-40 for this device. I have seen a lot posted upstream, it seems a lot of that hasn't actually landed yet though. Peter [1] https://www.spinics.net/lists/linux-usb/msg244163.html [2] https://www.spinics.net/lists/linux-pci/msg141988.html [3] https://www.spinics.net/lists/linux-pci/msg141465.html > > On Sun, 30 Jul 2023, 13:18 Andreas Reschke, > > wrote: > > > >> Hi there, > >> I've tried to install Fedora on my Rock 5 without success. > >> > >> Booting with > >> > > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img > >> > >> on SD-Card and source from > >> > > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. > >> > >> Board boots up fine but later starting in loop with > >> 350.456154] dracut-initqueue[1065]: Warning: # Anaconda > >> installer errors end ### > >> [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: > >> timeout, still waiting for following initqueue hooks: > >> [ 352.161387] dracut-initqueue[1065]: Warning: > >> /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: > >> "[ -e > >> "/dev/root" ]" > >> [ 352.164564] dracut-initqueue[1065]: Warning: > >> /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ > >> "$main_loop" > >> -ge "10" ]" > >> [ 352.167716] dracut-initqueue[1065]: Warning: > >> /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f > >> /tmp/settle.done ]" > >> [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: > >> starting timeout scripts > >> [ 352.172610] dracut-initqueue[1065]: Warning: # > >> Anaconda > >> installer errors begin # > >> [ 352.172852] dracut-initqueue[1065]: Warning: # > >> # > >> [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the > >> boot > >> has failed. Possible causes include > >> [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 > >> or > >> inst.repo boot parameters on the > >> [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. > >> Please > >> verify that you have specified > >> [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or > >> inst.repo. > >> [ 352.173918] dracut-initqueue[1065]: Warning: Please also note > >> that > >> the 'inst.' prefix is now mandatory. > >> [ 352.174156] dracut-initqueue[1065]: Warning: # > >> # > >> [ 352.174354] dracut-initqueue[1065]: Warning: Installer > >> errors encountered during boot: > >> [ 352.174543] dracut-initqueue[1065]: Warning: # > >> # > >> [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown > >> [ 352.174970] dracut-initqueue[1065]: Warning: # > >> # > >> > >> Full log file: see rock.txt > >> > >> Has anybody more succcess ? > >> > >> Greetings > >> Andreas___ > >> arm mailing list -- arm@lists.fedoraproject.org > >> To unsubscribe send an email to arm-le...@lists.fedoraproject.org > >> Fedora Code of Conduct: > >> https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > >> List Guidelines: > >> https://fedoraproject.org/wiki/Mailing_list_guidelines > >> List Archives: > >> > > https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org > >> Do not reply to spam, report it: > >> https://pagure.io/fedora-infrastructure/new_issue ___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it:
[fedora-arm] Re: Fedora on Rock 5B
Am 2023-07-30 15:26, schrieb Peter Robinson: Hi, It's in my backlog of devices to play with for F-39. It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else? Peter Hello Peter, UEFI is on SD-Card, Fedora iso is on USB-Stick, another empty USB-Stick and NVME disc are available for storage. On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: Hi there, I've tried to install Fedora on my Rock 5 without success. Booting with https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img on SD-Card and source from https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso. Board boots up fine but later starting in loop with 350.456154] dracut-initqueue[1065]: Warning: # Anaconda installer errors end ### [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: timeout, still waiting for following initqueue hooks: [ 352.161387] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e "/dev/root" ]" [ 352.164564] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" -ge "10" ]" [ 352.167716] dracut-initqueue[1065]: Warning: /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f /tmp/settle.done ]" [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: starting timeout scripts [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda installer errors begin # [ 352.172852] dracut-initqueue[1065]: Warning: # # [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot has failed. Possible causes include [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or inst.repo boot parameters on the [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please verify that you have specified [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo. [ 352.173918] dracut-initqueue[1065]: Warning: Please also note that the 'inst.' prefix is now mandatory. [ 352.174156] dracut-initqueue[1065]: Warning: # # [ 352.174354] dracut-initqueue[1065]: Warning: Installer errors encountered during boot: [ 352.174543] dracut-initqueue[1065]: Warning: # # [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown [ 352.174970] dracut-initqueue[1065]: Warning: # # Full log file: see rock.txt Has anybody more succcess ? Greetings Andreas___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue ___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
[fedora-arm] Re: Fedora on Rock 5B
Hi, It's in my backlog of devices to play with for F-39. It looks like it's not finding the storage, you don't mention what sort of storage you're trying to run Fedora from, is it the SD card or do you have the firmware on SD and Fedora on something else? Peter On Sun, 30 Jul 2023, 13:18 Andreas Reschke, wrote: > Hi there, > I've tried to install Fedora on my Rock 5 without success. > > Booting with > > https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock-5b_UEFI_Release_v0.7.1.img > on SD-Card and source from > > https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everything/aarch64/iso/Fedora-Everything-netinst-aarch64-Rawhide-20230730.n.0.iso > . > > Board boots up fine but later starting in loop with > 350.456154] dracut-initqueue[1065]: Warning: # Anaconda > installer errors end ### > [ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue: > timeout, still waiting for following initqueue hooks: > [ 352.161387] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e > "/dev/root" ]" > [ 352.164564] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop" > -ge "10" ]" > [ 352.167716] dracut-initqueue[1065]: Warning: > /lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f > /tmp/settle.done ]" > [ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue: > starting timeout scripts > [ 352.172610] dracut-initqueue[1065]: Warning: # Anaconda > installer errors begin # > [ 352.172852] dracut-initqueue[1065]: Warning: # > # > [ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot > has failed. Possible causes include > [ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or > inst.repo boot parameters on the > [ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please > verify that you have specified > [ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo. > [ 352.173918] dracut-initqueue[1065]: Warning: Please also note that > the 'inst.' prefix is now mandatory. > [ 352.174156] dracut-initqueue[1065]: Warning: # > # > [ 352.174354] dracut-initqueue[1065]: Warning: Installer > errors encountered during boot: > [ 352.174543] dracut-initqueue[1065]: Warning: # > # > [ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown > [ 352.174970] dracut-initqueue[1065]: Warning: # > # > > Full log file: see rock.txt > > Has anybody more succcess ? > > Greetings > Andreas___ > arm mailing list -- arm@lists.fedoraproject.org > To unsubscribe send an email to arm-le...@lists.fedoraproject.org > Fedora Code of Conduct: > https://docs.fedoraproject.org/en-US/project/code-of-conduct/ > List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines > List Archives: > https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org > Do not reply to spam, report it: > https://pagure.io/fedora-infrastructure/new_issue > ___ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-le...@lists.fedoraproject.org Fedora Code of Conduct: https://docs.fedoraproject.org/en-US/project/code-of-conduct/ List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines List Archives: https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org Do not reply to spam, report it: https://pagure.io/fedora-infrastructure/new_issue
