Sébastien,
Given the relatively low cost of the Artix-7 FPGAs, my preference is generally
to go as big and as fast as reasonably possible. I don't want to find that, for
example, we can't fit a hard FPU/fancy servo on Kasli because we saved $50 on
the FPGA. Also, since gateware development is usually much more expensive than
hardware, I'd rather go for dumb/inefficient gateware on big FPGAs than have to
optimise the gateware to fit on a smaller FPGA.
The fact that going for a 75T/100T gives us access to 12EEMs/Kasli (4 on the
BP) rather than 10EEMs/Kasli (only 2 on the BP) for the 50T is an added benefit.
Having said all that, if you think the 50T in the -2 speed grade won't be a
limitation then I'm happy to go along with your recommendation...
T
From: ARTIQ [artiq-boun...@lists.m-labs.hk] on behalf of
artiq-requ...@lists.m-labs.hk [artiq-requ...@lists.m-labs.hk]
Sent: 29 June 2017 11:00
To: artiq@lists.m-labs.hk
Subject: ARTIQ Digest, Vol 37, Issue 6
Send ARTIQ mailing list submissions to
artiq@lists.m-labs.hk
To subscribe or unsubscribe via the World Wide Web, visit
https://ssl.serverraum.org/lists/listinfo/artiq
or, via email, send a message with subject or body 'help' to
artiq-requ...@lists.m-labs.hk
You can reach the person managing the list at
artiq-ow...@lists.m-labs.hk
When replying, please edit your Subject line so it is more specific
than "Re: Contents of ARTIQ digest..."
Today's Topics:
1. Kasli FPGA selection (Sébastien Bourdeauducq)
--
Message: 1
Date: Thu, 29 Jun 2017 12:23:04 +0800
From: Sébastien Bourdeauducq
To: Thomas Harty
Cc: "artiq@lists.m-labs.hk" , Grzegorz
Kasprowicz
Subject: [ARTIQ] Kasli FPGA selection
Message-ID: <25ce5ee0-1bbb-3b7c-851d-3e1bc9e29...@m-labs.hk>
Content-Type: text/plain; charset=utf-8; format=flowed
On Wednesday, June 28, 2017 04:52 PM, Thomas Harty wrote:
> Have we settled on the 50T as the FPGA for the first version of Kasli,
> and what speed grade?
I would advocate for the 50T in -2 speed grade for two main reasons:
a) I don't think we need that much FPGA resources for the 100T to be needed.
b) -2 speed grade transceivers go to 6.25Gbps whereas -1 speed grade
ones go to 3.75Gbps. In addition to a significant increase in bandwidth,
the -2 transceivers can use the same configuration on the Metlino/Sayma
side which is used for the backplane (5Gbps). Otherwise we would have to
generate another set of Ultrascale transceiver settings (and shave a
yak) and potentially deal with weird RTIO frequency ratios in a hybrid
MTCA/Eurocard Sinara system.
Sébastien
--
Subject: Digest Footer
___
ARTIQ mailing list
https://ssl.serverraum.org/lists/listinfo/artiq
--
End of ARTIQ Digest, Vol 37, Issue 6
___
ARTIQ mailing list
https://ssl.serverraum.org/lists/listinfo/artiq