Hi,
I've solved the flash transfer problem changing the flash time in the
zapata.conf file,
I've set:
flash = 200 (the defualt was 750 ms)
in the extensions.conf the code is for example:
exten = 42,1,Flash()
exten = 42,2,SendDTMF(42,250)
exten = 42,3,Hangup()
now the transfer with flash works correctly.
About the question whether my PBX expects a hook flash for transfer or if it
uses the Recall (or Flash) button on a telephone, I,ve tried to transfer a
call between some phones connected to my PBX. When the original call is from
the external PSTN line the supervised transfer works with hook flash and
with the Recall button. When the original call is from an internal phone the
supervised transfer doesn't work anyway.
About debugging the Zap channel output using a second FXS channel like in
your previous post:
http://lists.digium.com/pipermail/asterisk-users/2006-November/171749.html
I haven't understood how to do the debug, do you use the Asterisk Console?
Which command?
Date: Wed, 8 Nov 2006 13:49:16 +0200
From: Dululu Ululu [EMAIL PROTECTED]
Subject: Re: [asterisk-users] flash transfer problem in asterisk
integration with old PBX
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=iso-8859-1
Hi
Can you verify whether your PBX expects a hook flash for transfer or if it
uses the Recall (or Flash) button on a telephone? Not an expert but I'm told
by the real experts that they're different and my investigations
http://lists.digium.com/pipermail/asterisk-users/2006-November/171749.html
show that the generated signals are different. Am going through the same
problem trying to figure out how to generate the same signal that Recall
does (for basically the same reason).
Haven't had a response to my post, will let you know if I come up with
anything.
Cheers
On 11/8/06, Andrea Giuliani [EMAIL PROTECTED] wrote:
I've tried to transfer a call using the Flash command, but with my
configuration it doesn't work.
I have a traditional PBX connected with a zap channel to Asterisk that
acts
like an IVR:
TELCO line -- traditional PBX (FXS) -- (FXO) Asterisk
From the TELCO line I can make a call to the traditional PBX and reach
Asterisk, the IVR system on Asterisk answers the call and I can dial an
extension (for example 42 that is on the traditional PBX). In the asterisk
dialplan I've set to transfer the call using Flash() like in this example:
exten = 42,1,Flash()
exten = 42,2,Background(silence/1) wait 1 second for the traditional
PBX
exten = 42,3,SendDTMF(42,250)
exten = 42,4,Background(silence/1) wait 1 second for the traditional
PBX
exten = 42,5,Hangup()
When I dial the extension 42, the phone 42 on the traditional PBX rings
but
when I answer there isn't communication with the call from the TELCO line
and after a few seconds the line hangup.
Here you can see what happen in asterisk CLI console:
Executing Answer(Zap/4-1, ) in new stack
-- Executing BackGround(Zap/4-1, a_suoni_plink/menu_esterno2) in
new
stack
-- Playing 'a_suoni_plink/menu_esterno2' (language 'it')
== CDR updated on Zap/4-1
-- Executing Flash(Zap/4-1, ) in new stack
-- Flashed channel Zap/4-1
-- Executing BackGround(Zap/4-1, silence/1) in new stack
-- Playing 'silence/1' (language 'it')
-- Executing SendDTMF(Zap/4-1, 42) in new stack
-- Executing BackGround(Zap/4-1, silence/1) in new stack
-- Playing 'silence/1' (language 'it')
-- Executing Hangup(Zap/4-1, ) in new stack
== Spawn extension (incoming, 42, 5) exited non-zero on 'Zap/4-1'
-- Hungup 'Zap/4-1'
I've tried the following changes to the dialplan in my example but
transfer
still doesn't work:
- I've tried to use wait(1) instead of Background(silence/1)
- I've tried without Background(silence/1) or wait(1):
exten = 42,1,Flash()
exten = 42,2,SendDTMF(42,250)
exten = 42,3,Hangup()
- I've tried without the Hangup() instructions at the end
Has anyone the same problem like me and any suggestions?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-- next part --
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20061108/105ce6
c5/attachment-0001.htm
--
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
End of asterisk-users Digest, Vol 28, Issue 44
