[Asterisk-Users] trouble compiling zaptel-0.9.1 on YellowDog (PowerMac)

[Artur Jasowicz]

I am running asterisk on an old PowerComputing Mac clone running  
YellowDog 3.0 (Red Hat clone for PowerMacs) I've decided to try adding  
a generic winmodem card and compile zaptel-0.9.1 for it.

First I tried to just unpack zaptel archive and do make clean; make  
install. Compiled fine, but during insallation I got the unresolved  
symbols error messages from depmod -a

I did some research and followed instructions at
http://www.voip-info.org/tiki-index.php? 
page=Asterisk%20Zaptel%20Installation

I copied my config file. BTW: instructions above direct to:
cp /boot/config-2.4.28 /usr/src/.config
Shouldn't that be:
cp /boot/config-`uname -r` /usr/src/linux-`uname -r`/.config
/usr/src does not seem like the right location to put .config into.
I did menuconfig and make dep steps, then removed old untarred zaptel  
dir, untarred fresh copy, make clean; make  log.make 21. Now my  
log.make file contains a looong list of complaints about problems in:
/usr/src/linux-2.4/include/linux/kernel.h
/usr/src/linux-2.4/include/asm/processor.h
/usr/src/linux-2.4/include/asm/cache.h
/usr/src/linux-2.4/include/asm/atomic.h
/usr/src/linux-2.4/include/linux/module.h
/usr/src/linux-2.4/include/linux/dcache.h
/usr/src/linux-2.4/include/asm/pci.h
while trying to compile tor2.c. Finally, it ends with:
/usr/src/linux-2.4/include/asm/pci.h:98: warning: implicit declaration  
of functi
on `printk_Rdd132261'
tor2.c: In function `init_spans':
tor2.c:274: warning: implicit declaration of function  
`sprintf_R1d26aa98'
make: *** [tor2.o] Error 1

Compiling asterisk as well as other software on this machine went well.  
What should I check to resolve this? I can do some basic compile  
troubleshooting, but this one seems like too much for me to handle on  
my own. Anyone care to see the entire log.make I generated? It is 140  
lines long.

Artur
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] trouble compiling zaptel-0.9.1 on YellowDog (PowerMac)

[Artur Jasowicz]

On Jun 18, 2004, at 1:05 PM, Steven Critchfield wrote:
On Fri, 2004-06-18 at 11:06, Artur Jasowicz wrote:
I am running asterisk on an old PowerComputing Mac clone running
YellowDog 3.0 (Red Hat clone for PowerMacs) I've decided to try adding
a generic winmodem card and compile zaptel-0.9.1 for it.
First I tried to just unpack zaptel archive and do make clean; make
install. Compiled fine, but during insallation I got the unresolved
symbols error messages from depmod -a
Use -ae for depmod to find out what it is complaining about, then you
can move forward. My bet is there isn't support for the hardware on non
x86 hardware.
That was what I did before updating my kernel source tree with 
currently running kernel's config file. Now I don't get as far as 
module installation to be able to do depmod. Now I need to figure out 
how to cleanly compile the drivers now that dependencies in kernel 
source have been updated to match kernel's configuration.

What support are you referring to? I am trying to get a regular PCI 
card to work on a PCI-equipped machine. All I should have to do is 
recompile the driver. The driver for a PCI card should not be dependent 
on any hardware other than PCI bus being present, should it?

In case anyone's curious, here's the result of depmod -ae from an 
earlier compile, before I did make dep in kernel tree:
depmod -ea
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/wcfxo.o
depmod: pci_free_consistent
depmod: pci_alloc_consistent
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/wcfxs.o
depmod: pci_free_consistent
depmod: pci_alloc_consistent
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/wct1xxp.o
depmod: pci_free_consistent
depmod: pci_alloc_consistent
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/wct4xxp.o
depmod: pci_free_consistent
depmod: pci_alloc_consistent
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/wcusb.o
depmod: usb_deregister
depmod: usb_register
depmod: usb_set_configuration
depmod: usb_submit_urb
depmod: usb_control_msg
depmod: usb_set_interface
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/zaptel.o
depmod: __wake_up
depmod: register_chrdev
depmod: create_proc_entry
depmod: remove_wait_queue
depmod: request_module
depmod: proc_mkdir
depmod: __pollwait
depmod: remove_proc_entry
depmod: add_wait_queue
depmod: *** Unresolved symbols in /lib/modules/2.4.20-8d/misc/ztd-eth.o
depmod: __kfree_skb
depmod: alloc_skb
depmod: skb_under_panic
depmod: dev_remove_pack
depmod: dev_queue_xmit
depmod: dev_get_by_name
depmod: skb_over_panic
depmod: dev_add_pack
depmod: *** Unresolved symbols in 
/lib/modules/2.4.20-8d/misc/ztdynamic.o
depmod: request_module

grep pci_free_consistent /boot/System.map returns:
c000f558 T pci_free_consistent
c022a2d4 R __kstrtab_pci_free_consistent
c027c25c R __ksymtab_pci_free_consistent
So I guess at least one of the symbols new modules are looking for is 
there.

___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users