Re[2]: [Asterisk-Users] Asterisk and Vonage - Can't call out but can receive calls
Mark,
Thank you very much!!! That was exactly it. My config files now look like the
following and I can send and receive calls using Vonage.
sip.conf:
[general]
externip=X.X.X.X
port=5060
bindaddr=X.X.X.X
context=vonage-out
disallow=all
allow=ulaw
allow=alaw
nat=yes
register=:[EMAIL PROTECTED]:5060/201
[vonage]
username=
type=peer
secret=PASSWORD
port=5060
nat=yes
host=atlas-east.vonage.net
fromdomain=vonage.net
canreinvite=no
fromuser=
dtmfmode=rfc2833
context=vonage-out
[201]
type=friend
username=201
secret=PASSWORD
host=dynamic
dtmfmode=rfc2833
defaultip=X.X.X.X
mailbox=201
callerid=NAME
progressinband=no
context=from-sip
extension.conf:
[vonage-out]
exten => ,1,Goto(from-sip,201,1)
[from-sip]
exten => _9.,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
Thanks,
-- Brian
Friday, August 19, 2005, 3:50:12 PM, you wrote:
> You are calling a sip host that you do not have defined in sip.conf.
> I think the line should look like this
exten =>> _9.,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED])
> This will force * to look in its sip.conf file for a stanza called
> [vonage] which you have rather than [atlas-east.vonage.net] which you
> don't have.
>>
>> extensions.conf (relevant part)
>> [vonage-out]
>> exten => ,1,Goto(from-sip,201,1)
>>
>> [from-sip]
>> exten => _9.,1,Dial(SIP/[EMAIL PROTECTED])
>> exten => 201,1,Dial(SIP/201)
>> exten => 202,1,Dial(SIP/202)
>>
>>
>>
>> Thanks,
>> -- Brian
>>
>> ___
>> Asterisk-Users mailing list
>> Asterisk-Users@lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk and Vonage - Can't call out but can receive calls
Hi, I'm trying to get Asterisk to connect to Vonage (softphone acct) to allow me to place and receive calls. I have successfully configured Asterisk to route inbound calls and send them to the correct extension, but I can't get outbound calls to work. I have Asterisk successfully registering with Vonage, but when an INVITE is sent out, I get a "404 Not Found" back from Vonage and thus Asterisk shows "SIP/atlas-east.vonage.net is circuit-busy" Below are my sip.conf and extensions.conf files that I am using. I saw several other sample configuration files that claimed connectivity to Vonage, but I have not been able to get them to work. My Asterisk server is behind a NAT firewall. The files below are the closest I have gotten to complete connectivity. Any feedback is appreciated! One note: I was able to receive calls only if I used atlas-east as the Vonage server. If I used sphone.vopr.vonage.net, no calls came in. sip.conf: [general] externip=X.X.X.X port=5060 bindaddr=X.X.X.X context=vonage-out disallow=all allow=ulaw allow=alaw nat=yes register=:[EMAIL PROTECTED]:5060/201 [vonage] username= type=peer secret=PASSWORD port=5060 nat=yes host=atlas-east.vonage.net fromdomain=vonage.net canreinvite=no fromuser= dtmfmode=rfc2833 context=vonage-out [201] type=friend username=201 secret=PASSWORD host=dynamic dtmfmode=rfc2833 defaultip=X.X.X.X mailbox=201 callerid=NAME progressinband=no context=from-sip extensions.conf (relevant part) [vonage-out] exten => ,1,Goto(from-sip,201,1) [from-sip] exten => _9.,1,Dial(SIP/[EMAIL PROTECTED]) exten => 201,1,Dial(SIP/201) exten => 202,1,Dial(SIP/202) Thanks, -- Brian ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
