[asterisk-users] ztdummy installed but choppy audio warning
Nigel, I read your post, because i have a new set up Centos 4.4, kernel 2.6.9-42.0.2.EL, yum updated and no digium hardware. But, I cannot load the the modules zaptel and ztdummy. I follow all the directives from voip-info.org but i cannot get it works. May you help me? Kind regards, Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] REGISTER attempt
Dear Friends, One customer of mine has a line from Vonage connected to his Asterisk box, he receive the following messages each 30 seconds in the CLI: REGISTER attempt 1 to [EMAIL PROTECTED] May you help me to understand what it means and how can I avoid this messages? Thank you in advance, Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] SCCP audio problems
Dear Colleagues, I have 2 phones Cisco 12SP+ connected to my asterisk box 1.2.6 and SCCP channel version: 20060408. When a call is generated no audio pass through the phones, neither if i call from a 12SP+ to another nor calling between 12SP and other phone (ex. an x-lite). Only sometimes works fine. What am I doing wrong? Thank you for your help. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problems Configuring Cisco 12SP+
Hi, After reading this valuable forum and the voip-info wiki and follow all the steps , but my Cisco 12SP+ remains unregistered. These are my config files: skinny.conf [general] port = 2000 ; Port to bind to, default tcp/2000 bindaddr = 172.20.1.1 ; Address to bind to dateFormat = D-M-Y ; M,D,Y in any order (5 chars max) keepAlive = 120 languaje=es allow = all ; disallow = [101] device=SEP00B06409E748 model=12SP ; Valid models: 12SP, 30VIP, 7910, 7920 (so far) version=P002L2J2 host=172.20.1.1 context=telsip line = 101 callwaiting=no callerid=Juanjo,101; extensions.conf exten = 3,1,DBget(temp=clid/SIP/Phone3) exten = 3,2,SetCIDName(${temp}) exten = 3,3,DBdel(clid/SIP/Phone3) exten = 101,1,Dial(Skinny/[EMAIL PROTECTED]) When I make a call from Phone3(SIP) to the Skinny/101 the following messages appear in the Asterisk CLI: -- Executing Dial(SIP/Phone3-f631, Skinny/[EMAIL PROTECTED]) in new stack Found device: 101 -- skinny_request([EMAIL PROTECTED]) -- Skinny cw: 0, dnd: 0, so: 0, sno: 0 skinny_new: tmp-nativeformats=2033663 fmt=4 Mar 28 16:56:48 ERROR[12354]: chan_skinny.c:1928 skinny_call: Device not registered, cannot call [EMAIL PROTECTED] -- Couldn't call [EMAIL PROTECTED] skinny_hangup(Skinny/[EMAIL PROTECTED]) on [EMAIL PROTECTED] == Everyone is busy/congested at this time (0:0/0/0) In the /tfptboot directory I have P002L2J2.bin and SEP00B06409E748.cnf May you help me where is my error. Thank you in advance, Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problems Configuring Cisco 12SP+
Derek, Thank you for your quick response. If i do a skinny debug, nothing happens :( And this shows my CLI: server*CLI skinny show lines 101 1 101N N server*CLI skinny show devices Name DeviceId IP TypeId R Model NL --- -- - -- -- 101 SEP00B06409E748 172.20.1.21 0 N 12SP1 server*CLI The device remains unregistered, How can I do to register the device? Thanks Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] CDR MySQL
Thank you Traci,I put this two variables in my .conf file and it works!!!Well, It seems that this variables are not necessaries in old versions, but in newest ones.Thank you again,Juanjo I believe you are missing 2 variables in your conf file:table=cdr(the table your cdrs should be stored)sock=/var/lib/mysql/mysql.sock(the location to your mysql.sock )try something like this:[global]hostname=localhostdbname=dbasterisktable=cdrpassword=dbpassworduser=dbusersock=/var/lib/mysql/mysql.sock userfield=1 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] CDR MySQL
Dear Tomislav Colleagues, I read your post in the Astersik-list about you can not compile the cdr_mysql on Asterisk 1.2 Well, I have a similar problem. I compiled the cdr_mysql module, but when i start Asterisk the following error appears: Dec 12 18:03:33 WARNING[7237]: loader.c:325 __load_resource: /usr/lib/asterisk/modules/cdr_addon_mysql.so: undefined symbol: ast_loadDec 12 18:03:33 WARNING[7237]: loader.c:554 load_modules: Loading module cdr_addon_mysql.so failed! And Asterisk stops. Any ideas? Thank you in advance, Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] CDR MySQL
My cdr_mysql.conf is the same I was using for version.1.0.9 and it is as follow [global] hostname=localhost dbname=dbasterisk password=dbpassword user=dbuser userfield=1 Any ideas? Thank you in advance, Juanjo ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk 1.2 + Debian Sarge
Dear Collegues I am trying to compile the new version (Asterisk.1.2) with my debian box and i get the following error when i compile the zaptel package: radio:/usr/src/asterisk-1.2/zaptel-1.2.0# make make: Warning: File `Makefile' has modification time 3.1e+08 s in the future cc -I. -O4 -g -Wall -DBUILDING_TONEZONE-DSTANDALONE_ZAPATA -DZAPTEL_CONFIG=\/etc/zaptel.conf\ -c -o gendigits.o gendigits.c cc -o gendigits gendigits.o -lm ./gendigits gcc -I/include -O6 -DMODULE -D__KERNEL__ -DEXPORT_SYMTAB -I/drivers/net -Wall -I. -Wstrict-prototypes -fomit-frame-pointer -I/drivers/net/wan -I/include/net -DSTANDALONE_ZAPATA -o zaptel.o -c zaptel.c In file included from zaptel.c:42: /usr/include/linux/kernel.h:72: error: syntax error before size_t /usr/include/linux/kernel.h:74: error: syntax error before size_t In file included from /usr/include/linux/timex.h:186, from /usr/include/linux/sched.h:11, from /usr/include/linux/module.h:10, from zaptel.c:44: /usr/include/linux/time.h:14: error: syntax error before time_t /usr/include/linux/time.h:16: error: syntax error before '}' token /usr/include/linux/time.h:20: error: syntax error before time_t In file included from /usr/include/linux/timex.h:186, from /usr/include/linux/sched.h:11, from /usr/include/linux/module.h:10, from zaptel.c:44: Have you any solution? Thank you in advance Juanjo ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Thounsand of SIP extension
Dear colleagues, I read on the web that implementations of thousand SIP extension on asterisk became worse and people suggest SER + asterisk. Anybody checks this? what is the problem? Any comment Kind regards, Juanjo ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Hangup ZAP channel
Dear Colleagues, I Have my * with a X100P clon card. When a call in from the PSTN and nobody answer the call go to the voicemail, then the caller my hangup or press #. If the caller hangup the ZAP channel never hangup, but if the caller press # the ZAP channel hangup. Even every time the outside part of the communication hangup the ZAP channel doesn´t detect anything and never hangup the channel. What is going wrong? Mayyou help me? Thank you in advance, Juanjo ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Zap channel is never realised
Dear Sirs, I have an Asterisk box with two X100P one connected to the PSTN and the other one with a conventional PBX. When the asterisk pass a call from the PSTN to the PBX (making a zap channel bridge) the Zap channel is never realised. Neither when the PSTN hangups nor when the PBX hangups. What is going wrong? Here I attach part of my extension.conf file exten = s,1,Answer exten = s,2,Background(bienvenida-es) exten = s,3,Dial(SIP/Phone4SIP/Phone3Zap/g1/5Zap/g1/4,20,tr) exten = s,4,Voicemail,u3 exten = s,5,Hangup exten = s,105,Voicemail,b3 exten = s,106,Hangup Thank you in advance, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 1-800 with FWD
oh, Thank you !! Problem solved. Juanjo On 5/13/05, Patrick M. Gray, Jr. [EMAIL PROTECTED] wrote: Did you dial the 800 number correctly? You need to dial *1800XXX. I had this problem for a while and then checked out the docs on FWD's website. Any toll-free number seems to require a * before dialing. You can setup your dialing prefixes to add it automatically so it becomes transparent to users. Pat -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Juanjo Portela Sent: Friday, 13 May, 2005 19:07 To: Lista Asterisk Subject: [Asterisk-Users] 1-800 with FWD Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial(SIP/Phone4-e85b, SIP/[EMAIL PROTECTED]|90|Ttr) in new stack -- Called [EMAIL PROTECTED] -- Got SIP response 500 I'm terribly sorry, server error occured (1/SL) back from 69.90.155.70 -- SIP/fwd.pulver.com-f526 is circuit-busy == Everyone is busy/congested at this time Have you any idea? Thank you in advance, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] 1-800 with FWD
Sirs, Thank you for your quick response. But when i try to make a call to FWD the following error appears: For example, when i call to 612 (a service number of FWD) -- Executing Dial(SIP/Phone4-e85b, SIP/[EMAIL PROTECTED]|90|Ttr) in new stack -- Called [EMAIL PROTECTED] -- Got SIP response 500 I'm terribly sorry, server error occured (1/SL) back from 69.90.155.70 -- SIP/fwd.pulver.com-f526 is circuit-busy == Everyone is busy/congested at this time Have you any idea? Thank you in advance, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] 1-800 free calls
Dear Sirs, I was using iaxtel to make calls to 1-800 phones for free, but unfortunatelly it is no working ... Anybody knows who may give me similar service than iaxtel? Thank you in advance, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem Compiling Spandsp
Great Steven !!! Thank you very much. I installed the libtiff-devel package and all run peacefully !!! KInd regards, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problem Compiling Spandsp
Sirs, I can't compile the source spandsp-0.0.2pre10; when i try to do the make sentence the following errors appear: # make Making all in src make[1]: Entering directory `/export/usr/src/spandsp-0.0.2/src' make all-am make[2]: Entering directory `/export/usr/src/spandsp-0.0.2/src' if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c -o adsi.lo adsi.c; \ then mv -f .deps/adsi.Tpo .deps/adsi.Plo; else rm -f .deps/adsi.Tpo; exit 1; fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c adsi.c -fPIC -DPIC -o .libs/adsi.o gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c adsi.c -o adsi.o /dev/null 21 if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c -o awgn.lo awgn.c; \ then mv -f .deps/awgn.Tpo .deps/awgn.Plo; else rm -f .deps/awgn.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c awgn.c -fPIC -DPIC -o .libs/awgn.o gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c awgn.c -o awgn.o /dev/null 21 if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT bert.lo -MD -MP -MF .deps/bert.Tpo -c -o bert.lo bert.c; \ then mv -f .deps/bert.Tpo .deps/bert.Plo; else rm -f .deps/bert.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT bert.lo -MD -MP -MF .deps/bert.Tpo -c bert.c -fPIC -DPIC -o .libs/bert.o bert.c:43:20: tiffio.h: No such file or directory In file included from spandsp.h:75, from bert.c:45: spandsp/t4.h:74: error: syntax error before TIFF spandsp/t4.h:74: warning: no semicolon at end of struct or union spandsp/t4.h:147: error: syntax error before '}' token spandsp/t4.h:147: warning: data definition has no type or storage class spandsp/t4.h:181: error: syntax error before '*' token spandsp/t4.h:181: warning: data definition has no type or storage class spandsp/t4.h:189: error: syntax error before '*' token spandsp/t4.h:195: error: syntax error before '*' token spandsp/t4.h:202: error: syntax error before '*' token spandsp/t4.h:208: error: syntax error before '*' token spandsp/t4.h:216: error: syntax error before '*' token spandsp/t4.h:225: error: syntax error before '*' token spandsp/t4.h:231: error: syntax error before '*' token spandsp/t4.h:237: error: syntax error before '*' token spandsp/t4.h:243: error: syntax error before '*' token spandsp/t4.h:249: error: syntax error before '*' token spandsp/t4.h:255: error: syntax error before '*' token spandsp/t4.h:261: error: syntax error before '*' token spandsp/t4.h:267: error: syntax error before '*' token spandsp/t4.h:273: error: syntax error before '*' token spandsp/t4.h:281: error: syntax error before '*' token spandsp/t4.h:281: warning: data definition has no type or storage class spandsp/t4.h:288: error: syntax error before '*' token spandsp/t4.h:294: error: syntax error before '*' token spandsp/t4.h:300: error: syntax error before '*' token spandsp/t4.h:306: error: syntax error before '*' token spandsp/t4.h:316: error: syntax error before '*' token spandsp/t4.h:324: error: syntax error before '*' token spandsp/t4.h:331: error: syntax error before '*' token spandsp/t4.h:337: error: syntax error before '*' token spandsp/t4.h:345: error: syntax error before '*' token spandsp/t4.h:351: error: syntax error before '*' token spandsp/t4.h:361: error: syntax error before '*' token spandsp/t4.h:367: error: syntax error before '*' token spandsp/t4.h:373: error: syntax error before '*' token spandsp/t4.h:379: error: syntax error before '*' token spandsp/t4.h:385: error: syntax error before '*' token spandsp/t4.h:392: error: syntax error before '*' token In file included from spandsp.h:76, from bert.c:45: spandsp/t30.h:195: error: syntax error before t4_state_t spandsp/t30.h:195: warning: no semicolon at end of struct or union spandsp/t30.h:198: error: syntax error before '}' token make[2]: *** [bert.lo] Error 1 make[2]: Leaving directory `/export/usr/src/spandsp-0.0.2/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/export/usr/src/spandsp-0.0.2/src' make: *** [all-recursive] Error I'm using Fedora Core 2 and Asterisk 1.0.5 Can you help me? Thank you in advance, Juanjo ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem Compiling Spandsp
Yes, I do. I know it seems a problem of libtiff not installed, but i have libtiff-3.5.7 installed :( On Mon, 14 Mar 2005 18:01:50 -0700, Max W Blackmer Jr [EMAIL PROTECTED] wrote: do you have libtiff source files installed? Original Message Subject: [Asterisk-Users] Problem Compiling Spandsp From: Juanjo Portela [EMAIL PROTECTED] Date: Mon, March 14, 2005 6:44 pm To: Lista Asterisk asterisk-users@lists.digium.com Sirs, I can't compile the source spandsp-0.0.2pre10; when i try to do the make sentence the following errors appear: # make Making all in src make[1]: Entering directory `/export/usr/src/spandsp-0.0.2/src' make all-am make[2]: Entering directory `/export/usr/src/spandsp-0.0.2/src' if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c -o adsi.lo adsi.c; \ then mv -f .deps/adsi.Tpo .deps/adsi.Plo; else rm -f .deps/adsi.Tpo; exit 1; fi mkdir .libs gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c adsi.c -fPIC -DPIC -o .libs/adsi.o gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT adsi.lo -MD -MP -MF .deps/adsi.Tpo -c adsi.c -o adsi.o /dev/null 21 if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c -o awgn.lo awgn.c; \ then mv -f .deps/awgn.Tpo .deps/awgn.Plo; else rm -f .deps/awgn.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c awgn.c -fPIC -DPIC -o .libs/awgn.o gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT awgn.lo -MD -MP -MF .deps/awgn.Tpo -c awgn.c -o awgn.o /dev/null 21 if /bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I. -I-g -O2 -MT bert.lo -MD -MP -MF .deps/bert.Tpo -c -o bert.lo bert.c; \ then mv -f .deps/bert.Tpo .deps/bert.Plo; else rm -f .deps/bert.Tpo; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I. -I -g -O2 -MT bert.lo -MD -MP -MF .deps/bert.Tpo -c bert.c -fPIC -DPIC -o .libs/bert.o bert.c:43:20: tiffio.h: No such file or directory In file included from spandsp.h:75, from bert.c:45: spandsp/t4.h:74: error: syntax error before TIFF spandsp/t4.h:74: warning: no semicolon at end of struct or union spandsp/t4.h:147: error: syntax error before '}' token spandsp/t4.h:147: warning: data definition has no type or storage class spandsp/t4.h:181: error: syntax error before '*' token spandsp/t4.h:181: warning: data definition has no type or storage class spandsp/t4.h:189: error: syntax error before '*' token spandsp/t4.h:195: error: syntax error before '*' token spandsp/t4.h:202: error: syntax error before '*' token spandsp/t4.h:208: error: syntax error before '*' token spandsp/t4.h:216: error: syntax error before '*' token spandsp/t4.h:225: error: syntax error before '*' token spandsp/t4.h:231: error: syntax error before '*' token spandsp/t4.h:237: error: syntax error before '*' token spandsp/t4.h:243: error: syntax error before '*' token spandsp/t4.h:249: error: syntax error before '*' token spandsp/t4.h:255: error: syntax error before '*' token spandsp/t4.h:261: error: syntax error before '*' token spandsp/t4.h:267: error: syntax error before '*' token spandsp/t4.h:273: error: syntax error before '*' token spandsp/t4.h:281: error: syntax error before '*' token spandsp/t4.h:281: warning: data definition has no type or storage class spandsp/t4.h:288: error: syntax error before '*' token spandsp/t4.h:294: error: syntax error before '*' token spandsp/t4.h:300: error: syntax error before '*' token spandsp/t4.h:306: error: syntax error before '*' token spandsp/t4.h:316: error: syntax error before '*' token spandsp/t4.h:324: error: syntax error before '*' token spandsp/t4.h:331: error: syntax error before '*' token spandsp/t4.h:337: error: syntax error before '*' token spandsp/t4.h:345: error: syntax error before '*' token spandsp/t4.h:351: error: syntax error before '*' token spandsp/t4.h:361: error: syntax error before '*' token spandsp/t4.h:367: error: syntax error before '*' token spandsp/t4.h:373: error: syntax error before '*' token spandsp/t4.h:379: error: syntax error before '*' token spandsp/t4.h:385: error: syntax error before '*' token spandsp/t4.h:392: error: syntax error before '*' token In file included from spandsp.h:76, from bert.c:45: spandsp/t30.h:195: error: syntax error before t4_state_t spandsp/t30.h:195: warning: no semicolon at end of struct or union spandsp/t30.h:198: error: syntax error before '}' token make[2]: *** [bert.lo] Error 1 make[2]: Leaving directory `/export/usr/src/spandsp-0.0.2/src' make[1]: *** [all] Error 2 make[1]: Leaving directory `/export/usr/src/spandsp-0.0.2/src' make: *** [all-recursive] Error I'm using Fedora Core 2 and Asterisk 1.0.5 Can you help me? Thank you
[Asterisk-Users] Error compiling astersik-oh323
Dear Sirs, I had compiled PWlib and OpenH323 correctly in my Fedora Core 2. But when I try to compile asterisk-oh323 I get the following error: `__use_AST_MUTEX_DEFINE_STATIC_rather_than_AST_MUTEX_INITIALIZER__' How can I solve it? Thank you for your help. Juanjo ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] RE. compiling zaptel
Mario, I solved this problem making teh following symlink : ln -s /lib/modules/2.6.8-1.521/build/ /usr/src/linux-2.6 I hope this may help you. Regards, Juanjo ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users