[Asterisk-Users] R2 implementation problem
I have a TE110P connected to a Telmex E1 circuit with R2 signaling. Asterisk version= 1.0.10 Zaptel= 1.0.1 Spandsp=0.0.3pre6 Unicall= 0.0.3pre8 *zaptel.conf span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 dchan=16 loadzone = us defaultzone=us *unicall.conf immediate=no loglevel=255 protocolclass=mfcr2 protocolvariant=mx,10,4 protocolend=cpe group = 1 context = telmex channel = 1-15 channel = 17-31 * *chan_unicall is compiled without any problems and when asterisk starts I see all channels in idle state. The problem is that I am unable to make or receive calls. When there is an incoming call I see the following Incoming Call (I receive 10 ANI digits and 4 DNIS digits) I suppose to receive 0875 for DNIS Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 - 0001 [1/ 1/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 Making a new call with CRN 32769 Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1101 - [2/ 2/Idle /Idle ] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:2865 handle_uc_event: Unicall/25 event Detected Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 - 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:08:48 WARNING[4293]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/25 1 on - [2/ 2/Seize ack /Seize ack] There is a 9 or 10 seconds pause and the I receive the following message. There is a busy tone in the caller side after the message Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 - 1001 [2/ 2/Group A /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Far end disconnected(cause=Normal, unspecified cause [31]) - state 0x2 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 - 0 off [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1 off - [2/ 800/Clear fwd /DNIS request ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 R2 prot. err. [2/ 800/Clear fwd /DNIS request ] cause 32774 - Invalid state Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1001 - [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Far end disconnected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:3198 handle_uc_event: CRN 32769 - far disconnected cause=Normal, unspecified cause [31] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Call control(6) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 Drop call(cause=Normal Clearing [16]) Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/27 1101 - [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/27 event Protocol failure -- Unicall/27 protocol error. Cause 32774 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 - 0001 [1/ 1/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 Making a new call with CRN 32769 Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1101 - [2/ 2/Idle /Idle ] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:2865 handle_uc_event: Unicall/28 event Detected Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 - 0 on [2/ 2/Seize ack /Seize ack] Jan 31 10:10:34 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on - [2/ 2/Seize ack /Seize ack] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 - 0 off [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 off - [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 - 8 on [2/ 2/Group A /DNIS request ] Jan 31 10:10:35 WARNING[4311]: chan_unicall.c:704 unicall_report: MFC/R2 UniCall/28 1 on - [2/ 2/Group A /DNIS request ] *NOTE*: I Already tried changing values for DNIS and ANIS and same problem I tried with other versions of spandsp and unicall and same problem The same occurs in Asterisk version 1.2.3 Does someone
[Asterisk-Users] Asterisk as a Protocol Converter from E1 to T1
I would like to know if I can use Asterisk to convert an E1 circuit to T1. I have two * boxes and in one location the telco provides me a T1 and at the other location provides me a E1 circuit. I have a TE405P in each box. I would like to know if I can receive the E1 circuit at span 1 (Configured as E1 with jumper settings) and configure the channels as dacsrbs to make a DACS to span2 (Configured as T1) and connect span2 with span3 using a cross over cable. And finally match configuration of span 3 with the remote location span. If somebody have tried this configuration please give me your comments. Regards ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] How change default law for T100P
I would like to know if there is a way to change default ulaw for a T1 card. I see in the zap show channel X that is working as ulaw. How do I change it in zapata.conf or zaptel.conf to alaw. Iam interconnecting a Meridian PBX but I need to configure it as alaw. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] cdr_mysql compilation error
I am trying to compile current cvs asterisk-addons for mysql cdr but I get the following error. Iam running mysql 4.0.20 and cvs v1 stable version of asterisk. cc -fPIC -I../asterisk -D_GNU_SOURCE -I/usr/local/mysql/include -c -o cdr_addon_mysql.o cdr_addon_mysql.c cdr_addon_mysql.c:50: warning: parameter names (without types) in function declaration cdr_addon_mysql.c:50: warning: data definition has no type or storage class cdr_addon_mysql.c: In function `mysql_log': cdr_addon_mysql.c:108: `mysql_lock' undeclared (first use in this function) cdr_addon_mysql.c:108: (Each undeclared identifier is reported only once cdr_addon_mysql.c:108: for each function it appears in.) cdr_addon_mysql.c: In function `usecount': cdr_addon_mysql.c:420: `mysql_lock' undeclared (first use in this function) make: *** [cdr_addon_mysql.o] Error 1 Any idea? -- Manuel Marin Garcia TRANSTELCO S.A. DE C.V. Campos Eliseos 9050 B4 – Cd. Juárez, Chih. 32452 - México Oficina: +52 656 692 11 09 – Fax: +52 656 692 1112 - Celular: 915 727 6141 http://www.transtelco.com.mx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] TDMoE Question
Just a Question. I would like to know if TDMoE follows specifiaciones of TDMoIP RAD protocol that says that there is a compression of 16/1 when you do TDMoIP. Manuel Marin Garcia TRANSTELCO S.A. DE C.V. Campos Eliseos 9050 B4 – Cd. Juárez, Chih. 32452 - México Oficina: +52 656 692 11 09 – Fax: +52 656 692 1112 - Celular: 915 727 6141 http://www.transtelco.com.mx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] How path latest CVS apps Makefile on order to compile app_rxfax and app_txfax
Does anybody is running spandsp with the latest cvs asterisk source. The Makefile.patch that comes with spandsp doesnt work with cvs source code. I would like to know how to path apps Makefile in order to compile app_txfax and app_rxfax applications. Pleae help -- Manuel Marin Garcia TRANSTELCO S.A. DE C.V. Campos Eliseos 9050 B4 – Cd. Juárez, Chih. 32452 - México Oficina: +52 656 692 11 09 – Fax: +52 656 692 1112 - Celular: 915 727 6141 http://www.transtelco.com.mx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problem with rxFax
I compiled libtiff version 3.6.1 and spandsp and spandsp version k. When trying to load asterisk I get the folloein error: Jun 7 10:15:03 WARNING[16384]: loader.c:408 load_modules: Loading module app_dtmftotext.so failed! Ouch ... error while writing audio data: : Broken pipe [EMAIL PROTECTED] root]# Warning, flexible rate not heavily tested! Please help! -- Manuel Marin Garcia TRANSTELCO S.A. DE C.V. Campos Eliseos 9050 B4 – Cd. Juárez, Chih. 32452 - México Oficina: +52 656 692 11 09 – Fax: +52 656 692 1112 - Celular: 915 727 6141 http://www.transtelco.com.mx ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Problem with vmail.cgi
Just a question. I can log to the vmail.cgi, I have a voicemail but the vmail.cgi does recognize any voicemail. Iam running perl 5.8.3 with setuid emulation Please help ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] use of Asterisk and T100P as Nortel DSX-1?
-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jim Ockers Sent: Thursday, June 26, 2003 11:39 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] use of Asterisk and T100P as Nortel DSX-1? Hi all, I've seen a couple of posts recently from people who are doing something with Asterisk and a T100P and a Nortel PBX. However it's not clear exactly what they are doing. Does anyone know if it's possible to use a T100P or T400P as a DSX-1 interface to connect to a T1/PRI CO module in a Nortel PBX? We have a Nortel Norstar Modular ICS PBX and I'd like to plug its CO module into an Asterisk server, for interesting reasons. You can use a Norstar T1 or E1 card to interconenct with asterisk. T1 card is supportted in DR5 but for E1 card I thing that you need Software release 6. There is an upgrade kit for norstar, includes hardware, software and key codes to enable PRI functions Nortel's ATA/ASM for analog stations are not suitable for use with a softswitch like Asterisk and FXO interfaces. Also, Nortel has no T1 station module, so I think I could only connect Asterisk to a CO card. In this case, the Asterisk server needs to act like a telco for the purposes of the Norstar. Will this work? Also, I'd need to set DID digits on calls delivered to the Norstar so that I could control the call routing. All of the posts I've seen to this list indicate that Asterisk can decode DID digits, caller ID, etc. that are delivered to it, but I haven't seen any indication that Asterisk can SET the DID information on a call being delivered to another PBX. Will this work? When PRI us used, you can use Nortar target lines in order to redirect incoming calls based on incoming digits I already know how to use coordinated call routing to deliver calls from the Norstart to Asterisk. These ideas would be a really handy use of Asterisk. If this stuff won't work, what might it take to make it work? I suspect it's more complicated than just using some sort of crossover cable and connecting them together. Thanks to the list denizens I've learned how to make Asterisk interface very nicely with a dumb pbx using the Flash and SendDTMF functions, but I would love to know the best way to make ASterisk interface with a smart PBX. Thanks a lot, Jim -- Jim Ockers, P.Eng. ([EMAIL PROTECTED]) Contact info: please see http://www.ockers.net/ ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Asterisk and Digium E400P in EuroISDN environment
I think it is possible. Euro ISDN manages all information using E1 channel 16. EM Protocol some times is called TIE lines. I have configured Euro ISDN in Mexico with Norstar E1 card -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Scott Stingel Sent: Thursday, June 26, 2003 1:27 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Asterisk and Digium E400P in EuroISDN environment Hello- I know this is a basic question, but before I start down the road of using Asterisk open source software, I thought I would ask if someone could please tell me definitively whether Asterisk and Digim will connect with EuroISDN using EM protocol, and pass the caller's number (CLI) and dialed number (DDI) to the software so I can see them in variables? I need this for an application that I'm proposing. Thanks in advance, Scott Stingel Scott M. Stingel Emerging Voice Technology Inc. Palo Alto, California and London, England Email: [EMAIL PROTECTED] URL:www.evtmedia.com ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Question about Voicemail and Voicemail2
I would like to know if maxsilence and silencethreshold parameters in voicemail.conf work only for voicemail2 application and what are the main differences that exist between voicemail and voicemail2. What possible values silencethreshold can take? Thanks ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users