RE: [Asterisk-Users] fax receive using TDM400P
I wrestled with this for a long time, as have many others and it just doesn't work with spandsp and asterisk alone. Use iaxmodem and hylafax in conjunction with asterisk... it works like a champ. I have a single POTS line coming in so I get voice fax with a single number using fax detect. http://iaxmodem.sourceforge.net/ -Original Message- From: Rich Adamson [mailto:[EMAIL PROTECTED] Sent: Friday, February 24, 2006 7:28 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] fax receive using TDM400P Ive been testing how to receive faxes using TDM400P cards and so far, after playing with gains, echocancell and echotraining on zapata.conf.. Ive ha dno luck, faxes come in as garbage or broken or with blank lines. Anybody has successfully done this? Any tips.. Also I have some ideas: 1. Is it really possible to get fxes on a fax machine using ATAs like the sipura 2002? Even using ulaw and pass-thru, is it possible? 2. Since the faxes is coming from PSTN thru the card, I guess asterisk will always stay in the middle right? No way around this. 3. Im also trying to receive faxes usign a TE110P card with spandsp, unicall and E1 R2MFC, no luck also, some stuff, garbage and broken faxes. Anybody done this sucessfuly? Hope anybody can share their thoughts and insight on this. Using the TDM400 card for any form of fax'ing (or modem use) is well known to be unreliable and, in most cases, totally unusable. The issue has been discussed many times over the last two years or so. There are no known workarounds. Its my understanding that lots of folks have spandsp working via T1 and/or PRI interfaces. The issues associated with the TDM400 card do not apply to the T1 cards. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Looking por a provider to work with asterisk
Very happy with nufone. http://www.nufone.net From: Jason Brashear [mailto:[EMAIL PROTECTED] Sent: Thursday, November 03, 2005 10:03 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Looking por a provider to work with asterisk I know about broadvoice.com But are they the only solution? I want to have two lines with Asterisk. This is just a home install. Believe it or not I have been using Vonage for about 2 ½ years and now I want to get rid of them to Use and learn Asterisk. Any help would be appreciated. -Jason ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] spandsp - fax is just blank pages
Hi, This is exactly the set up I was trying and could not get it to work (also w/ efax and the dev kit). You got slightly farther than I did -- for me, the detection worked and the macro launched for the extension, however the tiff file never got created. I did some additional searching in the archives and found this: http://lists.digium.com/pipermail/asterisk-users/2005-July/115141.html I concluded from that thread that SpanDSP and the TDM400P don't play well together yet. I hope I'm wrong and someone else chimes in with other suggestions. /Rob -Original Message- From: Asterisk mailing list account [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 20, 2005 3:27 AM To: pbo 808; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] spandsp - fax is just blank pages pbo 808 wrote: I've done quite a bit of googling and haven't found a solution to my problem. I've got the Digium dev kit (wctdm11b) set up and working. I've compiled spandsp and can receieve faxes from eFax (www.efax.com) but the pages are blank. The page count is correct, in that if I fax a two page document, my tiff file has two pages, but they are white blank pages. I found one similar post here http://lists.digium.com/pipermail/asterisk-users/2005-April/103069.html, but haven't seen a solution. Any ideas? ___ Hello, I have noticed the same problem in my tests with spandsp. I think it has to do with the format of the tiff file, but I couldn't find the reason... I hope that someone in this list who has solved this problem can share the solution with us. Best regards, Vlasis Hatzistavrou. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Asterisk Quit Registering with Broadvoice
I had the same problem as well a few weeks ago. Changed proxies several times, no luck. Got zero support from Broadvoice. Cancelled my account went with NuFone... much better now. /rob -Original Message- From: Dan Perik [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 19, 2005 4:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Asterisk Quit Registering with Broadvoice Jerry Geis wrote: Ken, Point to a different proxy. I had the same issue with chicago... Same here with DCA. Now using MIA. - Dan ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: Re: SpanDSP rxfax, no tiff
Ive tried both with and without Answer as the first line, same result. When I was searching through the archives, I believe there was a post from Steve Underwood that said to always use Answer as the first line. --- Yes, the permissions are okay for getting to that folder. /var/spool/asterisk is writable (voicemail works that's a subdirectory under the same path that has the same permissions as the subdirectory 'asterisk-fax' As the same user that runs asterisk I did a 'touch /var/spool/asterisk/asterisk-fax/test.tif' just to be sure I could write to that directory. Permissions are fine. [...] [custom-fax] exten = s,1,Answer exten = s,2,Macro(faxreceive) exten = s,3,SetVar(> exten = h,1,system(/usr/local/sbin/mailfax ${FAXFILE} [EMAIL PROTECTED] ${CALLERIDNUM} ${CALLERIDNAME} ${ONZENID}) [...] I do not have the system perform an answer. Try removing the line, perhaps the system is getting confused. B ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] RE: Re: Re: SpanDSP rxfax, no tiff
Well, while searching how to add the debug option, I think I found the answer http://lists.digium.com/pipermail/asterisk-users/2005-July/115141.html SpanDSP and the TDM400P dont play well together yet. So Im out of luck for the moment. Thanks to everyone who responded w/ suggestions. /Rob - Add the debug option to the rxfax line... From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Rob Danz Sent: 15 July 2005 13:13 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Re: Re: SpanDSP rxfax, no tiff I've tried both with and without Answer as the first line, same result. When I was searching through the archives, I believe there was a post from Steve Underwood that said to always use Answer as the first line. --- Yes, the permissions are okay for getting to that folder. /var/spool/asterisk is writable (voicemail works that's a subdirectory under the same path that has the same permissions as the subdirectory 'asterisk-fax' As the same user that runs asterisk I did a 'touch /var/spool/asterisk/asterisk-fax/test.tif' just to be sure I could write to that directory. Permissions are fine. [...] [custom-fax] exten = s,1,Answer exten = s,2,Macro(faxreceive) exten = s,3,SetVar(> exten = h,1,system(/usr/local/sbin/mailfax ${FAXFILE} [EMAIL PROTECTED] ${CALLERIDNUM} ${CALLERIDNAME} ${ONZENID}) [...] I do not have the system perform an answer. Try removing the line, perhaps the system is getting confused. B The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email '[EMAIL PROTECTED]' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] SpanDSP rxfax, no tiff
Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But theres not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: SpanDSP rxfax, no tiff
Yes, the permissions are okay for getting to that folder. /var/spool/asterisk is writable (voicemail works that's a subdirectory under the same path that has the same permissions as the subdirectory 'asterisk-fax' As the same user that runs asterisk I did a 'touch /var/spool/asterisk/asterisk-fax/test.tif' just to be sure I could write to that directory. Permissions are fine. --- If I leave the mailfax step out entirely, then there should be a .tif file, right? But theres not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Are the permissions okay for getting TO that folder? (do you have r+x on the directories 'above' the fax folder?) Thanks for the responses so far. Just trying to help out, I'm using ISDN lines with a DID, for receiving I do this.. If one calls number X, then Goto(custom-fax,s,1) and then.. [custom-fax] exten = s,1,Answer exten = s,2,Macro(faxreceive) exten = s,3,SetVar(ONZENID=${UNIQUEID}) exten = h,1,system(/usr/local/sbin/mailfax ${FAXFILE} [EMAIL PROTECTED] ${CALLERIDNUM} ${CALLERIDNAME} ${ONZENID}) [macro-faxreceive] exten = s,1,SetVar(FAXFILE=/var/spool/asterisk/fax/${UNIQUEID}.tif) exten = s,2,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten = s,3,rxfax(${FAXFILE}) exten = s,103,SetVar(EMAILADDR=${FAX_RX_EMAIL}) exten = s,104,Goto(3) The [macro-faxrecevive] is from AMP (wich I'm using for managing asterisk) Hope you can do something with this.. :-) Cheers ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] SpanDSP rxfax, no tiff.
Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. Im using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using distinctive ring detection in *. When you call my fax number, the ring detection does work, and does send it to the fax context correctly. The debugs show the call is answered, rxfax is invoked and it is trying to write to the fax file. After the sending party hangs up, it tries to execute a script that will ultimately mail me the fax file. But since the tiff file isnt there to begin with, that fails. The permissions on that folder are 777 for now so permissions arent the problem. I saw a post by Steve Underwood from last year on a similar problem, but it was looking like timing slips on the T1/E1 for that user Im just using a POTS line though. Ive also done ztmonitor to look at the Rx and Tx levels. Rx is a little hotter than Tx, but theyre both well on the right hand side of the scale. Any help is appreciated. Debugs extensions.conf excerpt are below. Thanks, Rob Debug output --- Jul 13 10:04:34 NOTICE[7975]: chan_zap.c:5759 ss_thread: Got event 2 (Ring/Answered)... -- Detected ring pattern: 93,0,0 -- Distinctive Ring matched context fax -- Executing Answer(Zap/4-1, ) in new stack -- Executing Macro(Zap/4-1, faxreceive) in new stack -- Executing Set(Zap/4-1, FAXFILE=/var/spool/asterisk/asterisk-fax/1121267067.12.tif) in new stack -- Executing RxFAX(Zap/4-1, /var/spool/asterisk/asterisk-fax/1121267067.12.tif) in new stack -- Executing System(Zap/4-1, /usr/local/sbin/mailfax /var/spool/asterisk/asterisk-fax/1121267067.12.tif ) in new stack Jul 13 10:05:03 WARNING[7975]: app_system.c:75 system_exec_helper: Unable to execute '/usr/local/sbin/mailfax /var/spool/asterisk/asterisk-fax/1121267067.12.tif ' -- Hungup 'Zap/4-1' Extensions.conf section --- [fax] exten = s,1,Answer exten = s,2,Macro(faxreceive) exten = h,1,system(/usr/local/sbin/mailfax ${FAXFILE} ${EMAILADDR}) [macro-faxreceive] exten = s,1,Set(FAXFILE=/var/spool/asterisk/asterisk-fax/${UNIQUEID}.tif) exten = s,2,rxfax(${FAXFILE}) exten = s,3,Set([EMAIL PROTECTED]) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users