Title: TE110P - [EMAIL PROTECTED] Install Problems
I
figured it out. The old system (Televantage 3 and 4 I think) has limited
specifications on the T1. After setting up the system, I was able to send
and recieve calls. I still have some work to do like figuring out faxing
and a floating receptionist, but this is a nice start.
Televantage
T1 Requirements:
Framing: D4 Superframe or Extended
Superframd
Interface: DSX-1
Supervisory Signal: 2- or 4-wire
EM
Wink: Wink and double wink
CSU or
NTU equipment: Robbed bit: CSU, ISDN: NTU
Line
coding/Framing: For D4 Superframe: AMI; for Extended Superframe:
B8ZS
Digit
signaling: Robbed Bit: DTMF or MF; ISDN: DTMF
--
Working Config for Televantage 3 T1
---zaptel.conf
span=1,1,0,d4,ami
#This will vary depending on your T1. Look at your Adtran or CSU and set
accordingly.em=1-24
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"# channel 1,
WCT1, unhandled for now# channel 2, WCT1, unhandled for now# channel 3,
WCT1, unhandled for now# channel 4, WCT1, unhandled for now# channel 5,
WCT1, unhandled for now# channel 6, WCT1, unhandled for now# channel 7,
WCT1, unhandled for now# channel 8, WCT1, unhandled for now# channel 9,
WCT1, unhandled for now# channel 10, WCT1, unhandled for now# channel
11, WCT1, unhandled for now# channel 12, WCT1, unhandled for now#
channel 13, WCT1, unhandled for now# channel 14, WCT1, unhandled for
now# channel 15, WCT1, unhandled for now# channel 16, WCT1, unhandled
for now# channel 17, WCT1, unhandled for now# channel 18, WCT1,
unhandled for now# channel 19, WCT1, unhandled for now# channel 20,
WCT1, unhandled for now# channel 21, WCT1, unhandled for now# channel
22, WCT1, unhandled for now# channel 23, WCT1, unhandled for now#
channel 24, WCT1, unhandled for now
# Global data
loadzone =
usdefaultzone=usend
zaptel.conf
---zapata.conf
;; Zapata telephony interface;;
Configuration file
[trunkgroups]
[channels]
language=ensignalling=em_wgroup=0context=from-pstnchannel=1-24echocancelwhenbridged=yesechotraining=400busydetect=nofaxdetect=incoming---end
zapata.conf
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of Robert
WagnerSent: Wednesday, September 14, 2005 10:46 AMTo:
asterisk-users@lists.digium.comSubject: [Asterisk-Users] TE110P -
[EMAIL PROTECTED] Install Problems
I am having problems sending and receiving calls
over the T1. They never seem to connect - outbound keeps ringing,
inbound gets busy. The T1 looks ok - no errors on the line. Any
ideas on what is wrong? I have tried a
variety of fxsks and fxoks configurations without avail. This is a
single [EMAIL PROTECTED] system with a single T1 card. Robbed Bit T1 ami,
d4.
--inbound call --
Starting simple switch on 'Zap/7-1' -- Starting simple switch on
'Zap/14-1' -- Executing
Playback("Zap/7-1", "vm-goodbye") in new stack -- Playing 'vm-goodbye' (language 'en')
-- Executing Macro("Zap/7-1",
"hangupcall") in new stack -- Executing ResetCDR("Zap/7-1", "w") in new
stack -- Executing
NoCDR("Zap/7-1", "") in new stack -- Executing Wait("Zap/7-1", "5") in new
stack -- Executing
Playback("Zap/14-1", "vm-goodbye") in new stack -- Playing 'vm-goodbye' (language 'en')
-- Executing Hangup("Zap/7-1",
"") in new stack == Spawn extension
(macro-hangupcall, s, 4) exited non-zero on 'Zap/7-1' in macro
'hangupcall' == Spawn extension
(default, s, 2) exited non-zero on 'Zap/7-1' -- Hungup 'Zap/7-1' -- Executing Macro("Zap/14-1", "hangupcall") in new
stack -- Executing
ResetCDR("Zap/14-1", "w") in new stack -- Executing NoCDR("Zap/14-1", "") in new
stack -- Executing
Wait("Zap/14-1", "5") in new stack -- Executing Hangup("Zap/14-1", "") in new
stack == Spawn extension
(macro-hangupcall, s, 4) exited non-zero on 'Zap/14-1' in macro
'hangupcall' == Spawn extension
(default, s, 2) exited non-zero on 'Zap/14-1' -- Hungup 'Zap/14-1'
--outbound call -- Executing SetVar("SIP/4901-cd04",
"OUTNUM=mynum") in new stack -- Executing Cut("SIP/4901-cd04",
"custom=OUT_1|:|1") in new stack -- Executing GotoIf("SIP/4901-cd04", "0?19") in new
stack -- Executing
Dial("SIP/4901-cd04", "ZAP/g0/mynum") in new stack -- Called g0/mynum -- Zap/1-1 answered SIP/4901-cd04 -- Hungup 'Zap/1-1' ---
[zaptel.conf] span=1,1,0,d4,ami # have tried with 1,0,0 - same problem
fxsks=1-24 loadzone = us defaultzone=us
[zapata.conf] [channels] signalling=fxs_ks
group=0