Re: [Asterisk-Users] dialout with PPP on ISDN to an ISP
On Sun, Feb 27, 2005 at 10:32:21PM -0600, Steven Critchfield wrote: On Mon, 2005-02-28 at 00:43 +0100, Ilija Poznic wrote: Hello my name is Ilija Poznic and I have a problem. My configuration is 1. Digium TDM4000P with one FXS. 2. AVM Fritz ISDN adapter (configured with capi). When I connect to my ISP and then start *. Asterisks is registering me to SIP provider iconnect. After that I can call international call trough VoIP. My problem is that I want to dialout to ISP only when I have a international call. I tried with PPPD but I can work it out. Anathor solution is by Steven Steven Critchfield Any reason you can't use a .call file to initiate the call? that also I do not understand how to use to make ISP connection. I'm not sure if you can use a .call file. I am not sure you can use ZapRas to call out on a CAPI channel. I am sure the suggestion I was making in the quoted message was to get a .call file dropped off to use ZapRas to dial the ISP. You will probably be unable to use PPP while asterisk has access to the ISDN adapter. Well with capi it should be possible. ppp via pppcapiplugin and asterisk via chan_capi -- Steven Critchfield [EMAIL PROTECTED] -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Suse 9.2 + CAPI Driver
On Mon, Feb 28, 2005 at 05:06:47PM -, Victor Alvarez wrote: Hello, I'm trying to install CAPI Driver for Suse 9.2 and I found the documentation for this pretty old since It refers to Suse 8.2 ( http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install ). This is especially apparent when I look at the section of these instructions for altering src.drv/makefile to replace the occurance of CARD_PATH. I tried to install the driver using the default makefile, with the final result of capi not installed - No such device or address (6) Wee, hard to read your long lines, is your line wrapper broken:) Anyway capi not installed is a message from your system that the hardware and the nedded modules are not working (together). Read the docs about capi4linux from your distri to get that up and running. You need a couple of more modules from your kernel like lsmod from my box: capidrv26612 3 b1pci 6276 1myHardWare b1dma 10728 0 [b1pci] myHardWare b1 15904 0 [b1pci b1dma] myHardWare capi 17856 8 capifs 3760 1 [capi] kernelcapi 29728 7 [capidrv b1pci capi] capiutil 14784 0 [capidrv kernelcapi] Are there any updated documents out there? Tons, I promise:) Regards, Victor. -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Language Problems
On Sat, Feb 26, 2005 at 08:53:23AM +0100, Peter Svensson wrote: On Sat, 26 Feb 2005, Anton Krall wrote: Asterisk will add sp after the last directory name. You will need the following directories (or symlinks): /var/log/asterisk/sounds/sp /var/log/asterisk/sounds/phonetic/sp /var/log/asterisk/sounds/digit/sp ^^ this should be digits/sp (s) /var/log/asterisk/sounds/letters/sp Peter -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problem with ISDN Dialin via CAPI
On Mon, Feb 21, 2005 at 11:36:45AM +0100, Müller, Thorsten wrote: Hello List, because this is my first post to this list, i'd like to introduce myself. My name is Thorsten Müller, 26 years old and live near Frankfurt/Main in germany. Okay, now to the reason for this posting: I just installed my first asterisk server (Debian 2.2 Kernel 2.4.18-686) with AVM ISDN Fritz PCI card (passive). I followed the configuration on http://voip-info.org and the Voice-Over-IP telephony between two PC's with SJPhone works perfectly. But connecting this machine to the ISDN line drives me crazy. I installed the capi driver from the AVM website and installed chan_capi without bigger problems. Followed these instructions: http://voip-info.org/tiki-index.php?page=Asterisk+How+to+connect+with+CAPI After entering the asterisk console i tried *CLI capi info Contr1: 2 B channels total, 2 B channels free. (looks good) *CLI capi debug CAPI Debugging Enabled When i call my msn with a normal phone i see the following content: = -- CONNECT_IND ID=001 #0x0020 LEN=0047 Controller/PLCI/NCCI= 0x101 CIPValue= 0x10 CalledPartyNumber = c1523065 CallingPartyNumber = 21 816101806124 CalledPartySubaddress = default CallingPartySubaddress = default BC = 80 90 a3 LLC = default HLC = 91 81 AdditionalInfo = default Feb 21 11:32:30 NOTICE[384]: chan_capi.c:1932 capi_handle_msg: CONNECT_IND ID=001 #0x0020 LEN=0047 Controller/PLCI/NCCI= 0x101 CIPValue= 0x10 CalledPartyNumber = c1523065 CallingPartyNumber = 21 816101806124 CalledPartySubaddress = default CallingPartySubaddress = default BC = 80 90 a3 LLC = default HLC = 91 81 AdditionalInfo = default == CONNECT_IND (PLCI=0x101,DID=523065,CID=6101806124,CIP=0x10,CONTROLLER=0x1) Feb 21 11:32:30 ERROR[384]: chan_capi.c:2051 capi_handle_msg: did not find device for msn = 523065 -- INFO_IND ID=001 #0x0021 LEN=0022 Controller/PLCI/NCCI= 0x101 InfoNumber = 0x70 InfoElement = c1523065 I think the outgoingmsn is missing / the one you are looking for Here are my entries of /etc/asterisk/capi.conf: = ; CAPI config ; [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 [interfaces] msn=523065 incomingmsn=523065 outgoingmsn=HERE_WE_NEED_A_VALID_MSN controller=1 softdtmf=1 accountcode= context=demo ;echosquelch=1 ;echocancel=yes ;echotail=64 ;callgroup=1 ;deflect=12345678 devices=2 -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] capiECT problem
On Wed, Feb 16, 2005 at 08:58:41PM +0100, Robert Rozman wrote:
Hi,
I'm trying to get capiECT working. I'd like to transfer call to another ISDN
router connected extension and free channel from router to Asterisk.
I get incoming call on CAPI and would liek to transfer it to dialed local
extension - 400 in this case:
[outbound-capi-local]
exten = _4XX,1,NoOp(Transferring to local PBX ISDN number ${EXTEN} on msn
CAPI/${CALLERIDNUM})
exten = _4XX,2,capiHOLD
exten = _4XX,3,capiECT,${CALLERIDNUM:1}:${EXTEN}
When I dial 400, another extension rings, shows right callerid (1st argument
to capiECT), but incoming call gets constant sound and obviously loses
connection. But capi channel is freed. When I lift handset of 400 extension,
asterisk s starts to anounce number that was sent as callerid ...
Any help, hint or working example for capiECT ?
Try to Answer the call first.
--
Tho/\/\as
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Strange MSN issue with HFC-s
On Thu, Feb 17, 2005 at 03:02:07PM +0100, Marc SCHAEFER wrote: Hi, I have two HFC-s boards I configured in NT and TE mode respectively. When I connect the two boards together, I can dial extensions and I see the correct called and caller ID numbers: -- Executing SetCallerID(Zap/2-1, 7516862) in new stack == CDR updated on Zap/2-1 -- Executing Dial(Zap/2-1, Zap/g2/0795025602|30|r) in new stack -- Called g2/0795025602 -- Extension '0795025602' in context 'isdn-local-bus' from '7516862' does not exist. Rejecting call on channel 0/1, span 1 however, when I connect the TE card to my NT2ab, it seems the caller ID number is not passed correctly (?) to the telco, since if when I get the call on my mobile I get the main number for my ISDN connection, not the specified number. With an AVM c4 it works correctly (syntax is CAPI/FROM:TO). Hm, do you have the right settings in zapata.conf? (switchtype, pridialplan...) -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Re: capiECT problem
On Thu, Feb 17, 2005 at 11:52:16PM +0100, Aldo Bergamini wrote:
...cut
This makes me wonder if I understand your hint; is this what you are
suggesting?
[outbound-capi-local]
exten = _4XX,1,NoOp(Transferring to local PBX ISDN number ${EXTEN} on
msn CAPI/${CALLERIDNUM})
exten = _4XX,2,Answer(); - ADDED LINE
exten = _4XX,3,capiHOLD
exten = _4XX,4,capiECT,${CALLERIDNUM:1}:${EXTEN}
According to the README from chan_capi source, Yes!
Have a look:
app_capiECT.c explicit call transfer of the holded call (must put
call on hold first!)
example:
exten = s,1,Answer
exten = s,2,capiHOLD
exten = s,3,capiECT,55:50
will ECT the call to 50 using 55 as the
callerid/outgoing msn
--
Tho/\/\as
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 4xHFC-s cards vs 1 quadbri HFC-4S card ?
Hallo Robert Rozman On Tue, 15 Feb 2005 13:54:48 +0100 you wrote: Hi, I wonder what makes the difference between inserting 4 HFC-S cards (cca. 120 EUR) and using 1 QuadBRI card (approx. 700 EUR) ? What makes such difference ? Is it possible to do first configuration ? 1st: 4Slots for the HFCs + 4NTs to supply the S0 bus + IRQ hassle (you need a box with bios to force IRQs, one more slot for ethernet, time to get all this up and running) 2nd: Yes (for testing)No for production (IMHO) With what drivers ? Is it stable ? 1st: bristuff, kernel 2610 2nd: my testbox works that way Thanks in advance, regards, Rob. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
On Wed, Feb 02, 2005 at 08:06:35AM +0100, Peer Oliver Schmidt wrote: Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? Timing is done either by Hardware (Digium cards), zaprtc (a rewrite from junghanns for the kernel-rtc module), via rtai (new in bristuff RC5) or via uhci usb (ztdummy). HFC cards do not have timing hardware, so you need something else. -- Best regards Peer Oliver Schmidt ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
On Wed, Feb 02, 2005 at 10:49:26AM +0100, Klaus-Peter Junghanns wrote: Am Mittwoch, den 02.02.2005, 10:41 +0100 schrieb Thomas Niesel: On Wed, Feb 02, 2005 at 08:06:35AM +0100, Peer Oliver Schmidt wrote: Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? Timing is done either by Hardware (Digium cards), zaprtc (a rewrite from junghanns for the kernel-rtc module), via rtai (new in bristuff RC5) or via uhci usb (ztdummy). HFC cards do not have timing hardware, so you need something else. HFC cards do have a timing source. If you run zaphfc you dont need any other zaptel timing source. Hm, I think I missed something. But it's true, on my zaphfc system I dont have any errors/probs on timing. On my capi system I had probs until the use of zaprtc. Sight, too many boxes...:) Sorry Peer, wrong thinking. best regards Klaus ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
On Tue, Feb 01, 2005 at 06:13:41PM +, Nigel Kukard wrote: Hi Guys, I got 2 internal HFC-S[5] (not sure what character this is) internal modem cards yesterday, thought I would get different makes as the one was a named brand, the other not... but anyway... Its picked up by lscpi as a ... Network Controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Ah, thats ok I'm using kernel 2.6.10, and I saw I must use CAPI. I compiled this along with the latest mISDN CVS + chan_capi... all went good. Oops, capi with misdn and hfc-based card? Sounds like a mix like QNX with windoom and MAC stuff :) I loaded the modules after a reboot, no problem, it detected the controller and I got a message kapi: card 1 mISDN ready., I loaded all the mISDN modules. Jepp, a mix! I then copied over the default mISDN configuration file for asterisk, and fired up asterisk. My problem comes in now, I am in South Africa and have plugged the modem into the first B-Channel on my Telecom's unit, where my very basic little hardware PBX was plugged in. When I fire up asterisk it picks up the CAPI device, lists its capabilities ... etc. When I type capi info it lists 2 B-Channels are available. Hm, strange! Cool I continued to dialin... *wait* *wait* *wait* asterisk didn't budge :-(, no incomming call despite the ringing sound on the line I dialed with, no debug messages (even after I added like 1,000 to the chan_capi module) ... nothing. Any ideas, hints... places to look? Shure: 1.st the wiki 2.nd make shure you got the right driver for your card 3.rd read the docs for that driver = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] AVM Fritz crash
Hallo Steve Hill On Tue, 25 Jan 2005 09:49:05 + (GMT) you wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 25 Jan 2005, Thomas Niesel wrote: Does anyone have any suggestions? Quick shot: SMP, HT? It is an SMP machine but it's only running a uniprocessor kernel ATM (I tried the driver in SMP mode and it crashed in a completely different way so I thought it might be better to debug the problem in UP mode which would hopefully be slightly more tested - in SMP mode the module modprobes ok but if you cat /proc/capi/controllers/1 then it immediately oopses). Hm... IRQ? Try other slot. I've tried several slots with the same results. Ok Do you modprobe/insmod the module by hand or via capiinit start? Modprobed by hand. Do you have a valid capi.conf (for the card, not for asterisk) Try using capiinit start. Finally try another card or try the card in another box I'm currently running the Fedora Core 3 2.6.10-1.741_FC3 kernel and it's on Athlon hardware. - Steve Jabber: [EMAIL PROTECTED] Web: http://www.nexusuk.org/ Servatis a periculum, servatis a maleficum - Whisper, Evanescence -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Public key available at http://www.nexusuk.org/pubkey.txt iD8DBQFB9hYS5zUOsIV3bqERAokeAJ9zMNa3j6umz0/dkxzD4BbeqzaRNQCfdJnI QuoEpGtwYZHD+1vo2SVSA5I= =pZZR -END PGP SIGNATURE- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] SIP UDP ports on firewal to open
Hallo Steve Radich On Tue, 25 Jan 2005 11:48:44 -0500 you wrote: I notice most things say to open ports 1-2 for UDP for SIP, however from time to time this range isn't where Asterisk is opening the ports: We're at xxx.xxx.xxx.xxx port 8542 Answering with capability 0x2(GSM) Answering with capability 0x4(ULAW) Answering with capability 0x8(ALAW) This call has no audio, presumably because port 8542 is firewalled in the iptables on the server. Is there somewhere I'm missing to port a port range in sip.conf (shouldn't there be if there isn't?). Well you should ask your (sip)provider which ports he is going to use :) Steve Radich BitShop, Inc. - http://www.bitshop.com ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] AVM Fritz crash
On Mon, Jan 24, 2005 at 04:31:33PM +, Steve Hill wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary' taints kernel. fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2 fcpci: (fcpci built on Jan 24 2005 at 13:51:46) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt :00:09.0[A] - GSI 11 (level, low) - IRQ 11 fcpci: AVM FRITZ!Card PCI found: port 0x1c00, irq 11 fcpci: Loading... fcpci: Driver 'fcpci' attached to stack. (152) Unable to handle kernel paging request at virtual address ff00 printing eip: e0bbe503 *pde = 2067 Oops: [#1] Modules linked in: fcpci(U) kernelcapi nfsd exportfs lockd parport_pc lp parport md5 ipv6 autofs4 sunrpc video button battery ac ohci_hcd i2c_amd756 i2c_core crc_ccitt isdn slhc r8169 3c59x floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod CPU:0 EIP:0060:[e0bbe503]Tainted: P VLI EFLAGS: 00010217 (2.6.10-1.741_FC3) EIP is at memcpy+0x13/0x30 [fcpci] eax: e0bbee4f ebx: dc1a403c ecx: 382efb93 edx: e0c14e54 esi: ff00 edi: e0bbe45e ebp: dbb80e90 esp: dbb80e88 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 3995, threadinfo=dbb8 task=db4bae50) Stack: d995b884 da7224cc e0c0d389 e0bbe45e ff00 e0bbee4f 1c02 1c02 0246 0014 dc1a4004 dc1a403c dc1a4004 ffed e0c0d64c dc1a4004 e0c0c53f dc1a4058 dc1a4004 e0c0c96d dfc1b000 dfc1b000 ffed Call Trace: [e0c0d389] lock_init+0x3e/0x5b [fcpci] [e0bbe45e] CA_MSEC+0xe/0x10 [fcpci] [e0bbee4f] Wait+0x2f/0x40 [fcpci] [e0c0d64c] table_init+0x2c/0x3e [fcpci] [e0c0c53f] start+0x13/0xa5 [fcpci] [e0c0c96d] add_card+0xb4/0x165 [fcpci] [e0c0c1b2] fritz_probe+0x9c/0xee [fcpci] [c01d173a] kobject_hotplug+0x2f7/0x2ff [c01da692] pci_device_probe_static+0x2a/0x3d [c01da6c0] __pci_device_probe+0x1b/0x2c [c01da6ec] pci_device_probe+0x1b/0x2d [c0238de5] driver_probe_device+0x30/0x4d [c0238ead] driver_attach+0x37/0x66 [c0239264] bus_add_driver+0x7a/0xa4 [c02396f0] driver_register+0x51/0x58 [e08580b2] fritz_init+0xb2/0xd3 [fcpci] [c01da8a4] pci_register_driver+0x8b/0x9e [e08580bf] fritz_init+0xbf/0xd3 [fcpci] [c0135965] sys_init_module+0x1c4/0x294 [c010336b] syscall_call+0x7/0xb Code: 10 c3 e0 ff 50 58 c9 c3 55 89 e5 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 8b 45 10 57 89 c1 56 c1 e9 02 8b 75 0c 8b 7d 08 f3 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 5e 5f 8b 45 08 5d c3 89 Does anyone have any suggestions? Quick shot: SMP, HT? IRQ? Try other slot. Do you modprobe/insmod the module by hand or via capiinit start? -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Menu tree for voicemailmain application
On Mon, Jan 24, 2005 at 10:55:03AM -0500, David Brodbeck wrote: Is there a menu tree diagram somewhere for the Voicemailmain application? I know my users will ask for one, and before I started drawing my own I thought I'd see if someone already had. Ask the wiki for voicemailmain, use the fourth link, done. --- David Brodbeck, System Administrator InterClean Equipment, Inc. 3939 Bestech Drive Suite B Ypsilanti, MI 48197 (734) 975-2967 x221 (734) 975-1646 (fax) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN + chan_capi
On Tue, Jan 18, 2005 at 02:53:26PM +0100, Dave Cotton wrote: I really can't understand what is happening. I have the same set up in two locations:- 2 fritz cards in each with the patches and the same capi.conf except for the MSNs. One installation calls in on controller 1 and starts calls out on controller 2, i.e. perfect. The other calls come in on both controllers at the same time. I have checked the patches etc. Is this possibly a problem caused by a PtP / PtMP config error? What would happen if the telco thought it was PtP and we dealt with it as PtMP? Don't know but: Cheapo fritz cards cannot be usesd in p2p only in ptmp mode. Only the active cards can be switched to p2p/ptmp mode. -- Dave Cotton [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] EuroISDN BRI 2 or 4 wires?
On Wed, Jan 12, 2005 at 11:06:18PM +0100, Remco Barende wrote: Hi List! Have a weird problem with ISDN in The Netherlands. The line that is coming in from the telco is 2 wires. The line is connected to an NT1 using the middle pair of a UTP connector. So far sop good. The incomming 2 wires are called UK0 here in Germany and they are connected to the NT1 or NTBA. However, the outgoing ports on the NT1, should they be wired with 2 wires or 4 (2 pairs)? The outgoing Line from the NT1/NTBA is a 4 wire (2pairs) bus called S0. If I use a 4 wire cable and stick it in the NT1 I get 0 voltage on the middle 2 wires, but i get approx 4 volts on the left 2 wires and another 40 volts on the outer (right) 2 wires. Is it correct that 2 pairs should be used to connect ISDN devices? Yepp, if you can read german have a look at www.kabelfaq.de . There is a well explained overview about isdn. Sorry for this slightly offtopic issue. The house is fully wired for one pair which means I may have a problem if i need 2 pairs. Thanks! Remco ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] spandsp-0.0.2pre6
Hallo Thomas Niesel On Wed, 29 Dec 2004 22:03:05 +0100 you wrote: Hi Folks, hi Steve I get following error on loading app_rx/txfax.so: ...WARNING[10458]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/app_rxfax.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference Unable to load app_rxfax.so ...cut Answer myself: use the wiki, open your eyes! Its all in there! -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] spandsp-0.0.2pre6
Hi Folks, hi Steve I get following error on loading app_rx/txfax.so: ...WARNING[10458]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/app_rxfax.so: symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference Unable to load app_rxfax.so Spandsp compiled and installed fine The modules for asterisk too. Versions: 1.0.3 for *, libpri, zaptel build from source Distri:debian, testing, kernel 2610 Any hints? THx -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] voicemailmain hotkey
On Sun, Dec 19, 2004 at 12:21:28AM -0600, Matthew Boehm wrote: I'm having a similar problem. Do you have operator=yes in your voicemail.conf under [general]? Argh, thats it, solved! Thanks a lot :) ...cut -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] voicemailmain hotkey
Hi Folks Since updated to 1.0.1/2 I got a prob with the hotkey to access voicemailmain. According to the wiki 0 jumps to extension oand* to a 0 isn't working, I get vm-sorry followed by HangUp :( * is working and I get access. So I changed the dialplan to get my voicemail managed. Tested on zaphfc and capi Is there something new/changed? Any hints? Thanks -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Setting up a Fritz AVM PCI card
Hallo Chris W On Sat, 06 Nov 2004 14:35:04 +0100 you wrote: I wonder if someone out there can help. Asterisk seems not to be recognising my Fritz card despite the drivers being installed as far as I can tell correctly. I'm runnign Redhat 9; Asterisk 1.0 from CVS; chan_capi is installed (a few errors at first but after a bit of reading I figured it out). modinfo capi results in: filename:/lib/modules/2.4.20-8/kernel/drivers/isdn/avmb1/capi.o description: CAPI4Linux: Userspace /dev/capi20 interface author: Carsten Paeth license: GPL parm:capi_major int parm:capi_rawmajor int parm:capi_ttymajor int lsmodshows: Module Size Used byNot tainted capi 20896 0 kernelcapi 33792 1 [capi] capiutil 24864 0 [kernelcapi] capifs 5420 1 [capi] This shows only the capi support, but where is your hardware? The module for your card is missing! What kind of board do you use? /var/log/messages contains: Nov 6 14:10:46 vuur kernel: capifs: Rev 1.1.4.1 Nov 6 14:10:46 vuur kernel: capi20: started up with major 68 Nov 6 14:10:46 vuur kernel: kcapi: capi20 attached Nov 6 14:10:46 vuur kernel: capi20: Rev 1.1.4.2: started up with major 68 (middleware+capi fs) Yes when I start Asterisk, I get: [chan_capi.so] = (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Nov 6 14:34:22 NOTICE[1076212352]: chan_capi.c:2636 load_module: CAPI not installed! Nov 6 14:34:22 WARNING[1076212352]: loader.c:334 ast_load_resource:chan_capi.so: load_module failed, returning -1 Nov 6 14:34:22 WARNING[1076212352]: chan_capi.c:2812 unload_module:Unable to unregister from CAPI! == Unregistered channel type 'CAPI' Nov 6 14:34:22 WARNING[1076212352]: loader.c:380 load_modules: Loading module chan_capi.so failed! Can anyone suggest anything? thanks cw -- Chris W ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] avm fritz box fon
Hi List I recently got one of those boxes (without wlan). Works as ata device with my local asterisk. Just tested the basic stuff like call the box and make call from the box. It uses sip with alaw/ulaw/g726 codecs. Runs on linux, kernel 2.4.17, mipsel. HardWare: -wan (UR2/annexB) -ethernet (10/100) -usb (usb-net) -3 capicontrolers (avm-fcclassic) 1 for fxo, 2 for fxs -16MB flash with squashfs -4MB memory... SoftWare: -busybox -telnetd -webserver Connections: -wan (Modem on board) -lan -usb -fxo (isdn or anlog) -2fxs Nice box maybe one day someone replaces the avm-software with asterisk! It looks like almost the same arch as the linksys-router. I will shortly set up some detailed readme about the inside. -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk and ISDN HFC-S card (Biilion) instead of Fritz Capi ?
Hallo HBK On Thu, 04 Nov 2004 19:07:37 +0100 you wrote: Hi I am trying the fine iso at http://www.asterisk.de.ms/ but are having problems with Capi probably due to having to old Fritz PCI card. Trying with both non version marked version and version marked V 2.0. I get following error when booting Astrisk on Debian: Oct 31 02:26:10 asterisk kernel: kcapi: capi20 attached Oct 31 02:26:10 asterisk kernel: capi20: Rev 1.1.4.2: started up with major 68 ( middleware+capifs) Oct 31 02:26:10 asterisk kernel: fcpci: AVM FRITZ!Card PCI driver, revision 0.2 Oct 31 02:26:10 asterisk kernel: fcpci: (fcpci built on Jun 3 2004 at 12:02:52) Oct 31 02:26:10 asterisk kernel: fcpci: Loading... Oct 31 02:26:10 asterisk kernel: fcpci: Driver 'fcpci' attached to stack Oct 31 02:26:10 asterisk kernel: kcapi: driver fcpci attached Oct 31 02:26:10 asterisk kernel: fcpci: Auto-attaching... Oct 31 02:26:10 asterisk kernel: PCI: Found IRQ 11 for device 00:0c.0 Oct 31 02:26:10 asterisk kernel: fcpci: Error: Invalid parameters (base=0xe800, irq=11) Do you try to asign parameters to this pci card Not a good idea try it without or even better use the /etc/isdn/capi.conf together with the capiinit program. Oct 31 02:26:10 asterisk kernel: fcpci: Not loaded. Oct 31 02:26:10 asterisk kernel: kcapi: driver fcpci detached Can anbody on the list give a clue on this problem ? Or can you please direct me to a guide on how to install driver for HFC-S based ISDN card on Asterisk/Debian ? Search the wiki for zaphfc. Thank you ! HB Norway ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN Capi Drivers HELP
Hallo Paulo Adriano On Tue, 02 Nov 2004 10:02:53 + you wrote: I have just added a Conceptronic ISDN card to use as my only BRI. 1 - modprobe capi detects the card fine (i can see that in the log) Shure? Next Asterisk documentation says I should install CAPI drivers ?? My card documentation says it supports LINUX but I don t see any drivers to be installed. Asterisk blows because it says CAPI drivers not installed... Shure! Cause the only cards working with capi are from AVM and Eicon Your card will work with isdn4linux (i4l) only or zaphfc if it has a cologne chipset on. When making calls to one of the 3 msn s I see in the linux log the phone numbes being received ... Thanks in advance Paulo Adriano WaveLIS LDA Francisco Paulo Adriano WaveLIS LDA Mobile +351 91 870 87 98 Office + 351 21 989 83 34 Fax +351 21 989 83 35 E-mail : [EMAIL PROTECTED] -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] calling an iaxy
Hallo rich allen On Mon, 1 Nov 2004 12:30:43 -0900 you wrote: iH i have an IAXy which i can make calls from but am unable to call. when i dial the extension assigned, i get the following from the console; -- Executing Dial(SIP/5801-b665, IAX2/[EMAIL PROTECTED]) in new stack -- Called [EMAIL PROTECTED] -- Call accepted by 192.168.0.5 (format ULAW) Nov 1 12:28:33 NOTICE[163850]: chan_iax2.c:5546 socket_read: Rejected call to 192.168.0.5, format 0x4 incompatible with our capability 0xff03. Hm, I'm not an expert on iaxY but it looks like that the codec is the prob. If both sides do not find a common codec the call will be rejected. Try to call with alaw or gsm and see if it helps. -- Hungup 'IAX2/5899/1' == No one is available to answer at this time what might i be missing? thanks - hcir ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Debian Sarge, ISDN, CAPI and Asterisk blues
On Sat, Sep 25, 2004 at 10:12:44AM +0200, Joost Kraaijeveld wrote: Hi all, I am trying to get my Debian Sarge to work with 2 Winbond W6692 chipset based ISDN cards and Asterisk 1:0.9.1+1.0RC1-8. I have installed CAPI and chan_capi (all latest testing versions). If I start asterisk I get: chan_capi.c:2635 load_module: CAPI not installed. Sadly to say but those cards are not useable with capi. ISDN Cards for capi-driver are: -avm (fritz!, b1, c2, c4, some usb units) -eicon (diva-server-pci) -hypercope (dtmf not working, sound is crappy) Cards based on winbond are useable with i4l and IMHO mISDN. Donno if zaphfc would be useable right now or in near future!? lsmod | grep capi gives: capi 17472 0 capifs60242 capi kernelcapi46496 1 capi Anyone any suggestions of where to look? Anyone a working asterisk with ISDN on Debian? Groeten, Joost Kraaijeveld Askesis B.V. Molukkenstraat 14 6524NB Nijmegen tel: 024-3888063 / 06-51855277 fax: 024-3608416 e-mail: [EMAIL PROTECTED] web: www.askesis.nl ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] I can't solve mi problem compiling CAPI, please help
On Thu, Sep 23, 2004 at 11:03:21AM +0200, [EMAIL PROTECTED] wrote: Hello, I?m trying to compile the Fritz CAPI module for Debian stable, following the steps related in http://www.voip-info.org/tiki-index.php?page=Asterisk%20AVM%20Fritz%20CAPI%20Driver%20Install But I always get the same error, debian-asterisk:/home/ismaelg/fritz# make Have you called make clean first? (cd src.drv; make CARD=fcpci) make[1]: Entering directory `/home/ismaelg/fritz/src.drv' cc -c -DMODULE -DMODVERSIONS -D__KERNEL__ -DNDEBUG \ -march=i686 -O2 -Wall -I /usr/src/kernel-source-2.4.18/include/ \ main.c -o main.o You use kernel version 2.4.18? Why? cc: cannot specify -o with -c or -S and multiple compilations make[1]: *** [main.o] Error 1 make[1]: Leaving directory `/home/ismaelg/fritz/src.drv' make: *** [drv] Error 2 debian-asterisk:/home/ismaelg/fritz# I don't know what is happening. Could someone give me a clue to solve this? What is the version of the avm-driver? Check ftp.avm.de/cardware/fritzcrd.pci/linux... Try some of the older versions (8.1, 8.0) Thanks a lot. Ismael Gil. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problems compiling CAPI
On Wed, Sep 22, 2004 at 07:15:19PM +0200, [EMAIL PROTECTED] wrote: Hello all, I'm trying to setup a AVM C2 card. I have read the kernel requirements for this card. M CAPI2.0 support [*] Verbose reason code reporting (Kernel size +=7K) [*] CAPI2.0 Middleware support (EXPERIMENTAL) M CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support M CAPI2.0 capidrv interface support My problem is when I make a make menuconfig in /usr/src/linux/, i can't see any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian stable). When I make a capiinit, to test the AVM card, it says, debian-asterisk:~# capiinit modprobe: Can't locate module capifs modprobe: Can't locate module capifs WARNING: filesystem capifs not available mount /dev/capi should help but it should be done from the module itself! Are you shure you have all the modules in /lib/modules/kernel-version...? depmod -a might be helpfull too. /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device Well that looks like more probs then just the missing fs. Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o failed /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: insmod b1pci failed ERROR: failed to load driver b1pci ERROR: controller 1: firmware file c4.bin not found ftp.in-berlin.de/pub/capi4linux/firmware/c4... ERROR: controller 2: firmware file - not found ERROR: failed to load firmware for controller 1 driver c2 name c2-d400 ERROR: failed to load firmware for controller 2 driver c2 name c2-d400 As you can see, the first error is can`t locate module capifs. What i am doing wrong? Missing devices in /dev/... Any clue will be apreciated. Regards Ismael Gil ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Problems compiling CAPI
On Wed, Sep 22, 2004 at 07:15:19PM +0200, [EMAIL PROTECTED] wrote: Hello all, Sorry for my first mail which answers the 2nd part:( I'm trying to setup a AVM C2 card. I have read the kernel requirements for this card. M CAPI2.0 support [*] Verbose reason code reporting (Kernel size +=7K) ^^^ No need for that! [*] CAPI2.0 Middleware support (EXPERIMENTAL) M CAPI2.0 /dev/capi support [*] CAPI2.0 filesystem support M CAPI2.0 capidrv interface support My problem is when I make a make menuconfig in /usr/src/linux/, i can't see any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian stable). make menuconfig is just to configure How about make modules make modules_install -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] (euro)ISDN: complete silence / can't hear a word.
On Thu, Sep 23, 2004 at 01:10:44AM +0200, Gunther Stammwitz wrote: Hello, I just got my isdn-card working together with i4l and asterisk. Everything seems to be working fine: I can accept calls coming from the outside and I can dial out. Even setting the msn works like charm but my problem is that I cannot hear a word. There's complete silence in both directions. Any idea what could be the cause? Thanks for your help, Gunther Lspci: :01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface [I'm not sure what kind of card this is but maybe there's the cathedral of cologne on it(?)] Maybe? Yes or no would be helpfull! I4l uses hisax type=20 The output is: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 HiSax: Warning - no protocol specified HiSax: using protocol EURO HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: Traverse Tech. NETjet-S driver Rev. 2.13.2.4 ACPI: PCI interrupt :01:07.0[A] - GSI 18 (level, low) - IRQ 201 NETjet-S: TJ300 card configured at 0x2000 IRQ 201 IRQ 201? Dunno if that is real! NETjet-S: ISAC version (0): 2086/2186 V1.1 NETjet-S: IRQ 201 count 0 NETjet-S: IRQ 201 count 6 HiSax: DSS1 Rev. 2.32.2.3 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added Beside this I found some HFC Cards with probs on i4l (no audio at all) Check for shure it is hfc (^^), drop i4l and use zaphfc for it. Asterisk's modem.conf driver=i4l group=1 msn=(my first number) incomingmsn=(my other numbers) outgoingmsn=0 device = /dev/ttyI0 device = /dev/ttyI1 ;features=dtmf,noquelch ;features=dtmf Asterisk -cv shows: Asterisk Ready. *CLI == Starting Modem[i4l]/ttyI0 at IN-isdn,(my msn),1 failed so falling back to exten 's' == Starting Modem[i4l]/ttyI0 at IN-isdn,s,1 still failed so falling back to context 'default' -- Executing Wait(Modem[i4l]/ttyI0, 1) in new stack -- Executing Answer(Modem[i4l]/ttyI0, ) in new stack Sep 23 01:12:07 DEBUG[542704]: chan_modem_i4l.c:555 i4l_answer: Detecting DTMF inband with sw DSP on /dev/ttyI0 -- Executing DigitTimeout(Modem[i4l]/ttyI0, 5) in new stack -- Set Digit Timeout to 5 -- Executing ResponseTimeout(Modem[i4l]/ttyI0, 10) in new stack -- Set Response Timeout to 10 -- Executing BackGround(Modem[i4l]/ttyI0, demo-congrats) in new stack Sep 23 01:12:07 DEBUG[542704]: channel.c:1128 ast_settimeout: Scheduling timer at 160 sample intervals -- Playing 'demo-congrats' (language 'en') Sep 23 01:12:08 DEBUG[542704]: chan_modem_i4l.c:413 i4l_read: Value of escape is ^ (3)... Sep 23 01:12:08 DEBUG[542704]: channel.c:1128 ast_settimeout: Scheduling timer at 0 sample intervals == Spawn extension (default, s, 5) exited non-zero on 'Modem[i4l]/ttyI0' -- Hungup 'Modem[i4l]/ttyI0' ISDNLOG-output: Sep 23 01:12:05 * Call to tei 127 from ? on +49 (my msn), Frankfurt am Main RING (Speech) Sep 23 01:12:05 * Call to tei 127 from ? on +49 (my msn), Frankfurt am Main HLC: CCITT, Telefonie Sep 23 01:12:06 Call to tei 67 from ? on +49 (my msn), Frankfurt am Main CONNECT (Speech) Sep 23 01:12:08 Call to tei 67 from ? on +49 (my msn), Frankfurt am Main Normal call clearing (User) Sep 23 01:12:08 Call to tei 67 from ? on +49 (my msn), Frankfurt am Main HANGUP ( 0:00:02) In this case the call was just 2 seconds caus I hung up - but that doesn't matter. Even waiting a minute won't help. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN problem: lacking dialtone
Hallo Martin Mielke On Tue, 21 Sep 2004 14:32:34 +0200 you wrote: ...cut so the isdn4linux drivers are correctly loaded. I know, CAPI should do better but I can't compile from the tarball (see my post about it) When trying to dial the PSTN using the ISDN interface I get: --- *CLI -- Executing Dial(SIP/mmielke-8c8e, Modem/g1:8123456789) in new stack -- Called g1:8123456789 Sep 21 14:20:53 WARNING[229391]: chan_modem_i4l.c:355 i4l_read: Device '/dev/ttyI1' lacking dialtone -- Hungup 'Modem[i4l]/ttyI1' == No one is available to answer at this time --- ...lacking dialtone is false. I just plugged an ISDN-phone to the line and tested it works perfectly... Does the phone had the same MSN? Is there maybe a PBX needs a leading Digit to get outside line? Try your settings by using minicom first. There is a good manual from i4l to call yourself via ttyI0/ttyI1 with minicom. So, any ideas? what am I doing wrong this time? ;) -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ISDN problem: lacking dialtone
Hallo Martin Mielke On Tue, 21 Sep 2004 17:03:54 +0200 you wrote: Thomas Niesel wrote: [ snip ] Does the phone had the same MSN? I think so. It could dial outside without a problem... Is there maybe a PBX needs a leading Digit to get outside line? No, those are direct lines to the PSTN, so no leading 0 (or whatever) is needed ... Ok Try your settings by using minicom first. There is a good manual from i4l to call yourself via ttyI0/ttyI1 with minicom. The minicom-test doesn't work at all. I always get either BUSY or NO CARRIER... Same errror as on (*) !? Cable/Card More ideas? Do you have isdnlog running? If so, call your self and watch syslog. Even with minicom and configured MSN (ate...) you should see something if a call comes in on that MSN. Martin ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Need Help !!
Hallo Daniel Eboa On Tue, 21 Sep 2004 16:16:44 +0100 you wrote: Hello to all, I'm new user of Asterisk. I'm running Asterisk on a RedHat 9 platform. Everything seems to be ok but I got lot of error messages and I don't know their meaning. Can somebody help me ?? These are the messages: WARNING[163850]: chan_sip.c:673 retrans_pkt: Maximum retries exceeded on call [EMAIL PROTECTED] for seqno 102 (Non-critical Request) The server displayed this message when the party I called picks up the phone. Immediately after picking up the phone, the call drop. Ah, I remember... -- Executing Dial(SIP/Daniel-7e41, SIP/[EMAIL PROTECTED]) in new stack -- Called [EMAIL PROTECTED] -- SIP/195.149.11.98-86d9 is ringing -- SIP/195.149.11.98-86d9 answered SIP/Daniel-7e41 -- Attempting native bridge of SIP/Daniel-7e41 and SIP/195.149.11.98-86d9 Here (*) try to connect the 2 partys directly! You should check the docu/wiki for sip and (can)reinvite. This chapter is a bit tricky cause it will affect also your firewall. ...cut -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HELP on AVM Fritz with CAPI drivers for SMP RH 9
On Tue, Sep 21, 2004 at 09:00:18PM +0300, Vlasis Chatzistayrou wrote: Hello, I have been wrestling with installing the CAPI drivers for AVM Fritz in order to use chan_capi with Asterisk. I use an SMP machine, RH 9. I have found rpm's for CAPI and AVM drivers (namely: capi4k-utils-2003.06.16-08.mungo.RH9.i686.rpm and kernel-2.4.20-8- avmfcpci-03.11.02-08.mungo.RH9.i686.rpm), but I believe that they support only single processor machines. Check www.avm.de for information about SMP and passive fritz! card-driver4linux Also have a look at ftp.avm.de/cardware/fritzcard.pci/linux/ Check a few (not always the latest) versions. I've already spent too much time with chan_modem which gives me problems (like no audio until the callis answered, or kernel crashes probably because of the isdn4l drivers). So, I can't afford to go back to isdn4linux drivers and the HiSax card that I used. Does anyone have RPMs or source code that I can use for Fritzcard (PCI) and SMP? Thanks in advance for any assistance, Vlasis. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] ZapRTC loading problems
Hallo Matthew Boehm On Mon, 20 Sep 2004 16:54:33 -0500 you wrote: I finally got 2.4 recompiled with RTC as a module: Module Size Used byNot tainted autofs 13684 0 (autoclean) (unused) acenic241092 0 (unused) iptable_filter 2412 0 (autoclean) (unused) ip_tables 15864 1 [iptable_filter] e100 62340 1 rtc 9084 0 (autoclean) Here is my compile/load output from zaptelrtc: [EMAIL PROTECTED] zaptelrtc]# make cc -c zaprtc.c -D__KERNEL__ -DMODULE -DEXPORT_SYMTAB -fomit-frame-pointer -O2 -Wal l -I/usr/src/linux-2.4/include -I../zaptel -Wall -DMODVERSIONS -include/usr/src/linux-2.4/include/linux/modversions.h gcc -s -Wall -Wstrict-prototypes rtctest.c -o rtctest rtctest.c: In function `main': rtctest.c:30: warning: implicit declaration of function `exit' gcc -s -Wall -Wstrict-prototypes rtcsetup.c -o rtcsetup rtcsetup.c: In function `main': rtcsetup.c:31: warning: implicit declaration of function `exit' rtcsetup.c:23: warning: unused variable `i' rtcsetup.c:23: warning: unused variable `irqcount' rtcsetup.c:24: warning: unused variable `tmp' rtcsetup.c:24: warning: unused variable `data' rtcsetup.c:25: warning: unused variable `rtc_tm' sync [EMAIL PROTECTED] zaptelrtc]# ls Makefile README rtcsetup rtcsetup.c rtctest rtctest.c zaprtc.c zaprtc.o [EMAIL PROTECTED] zaptelrtc]# make load sync modprobe zaptel insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. IMHO you have to _replace_ rtc with zaprtc (unload rtc first, load zaprtc second) You may find more information in syslog or the output from dmesg make: *** [load] Error 1 [EMAIL PROTECTED] zaptelrtc]# insmod ./zaprtc.o ./zaprtc.o: init_module: Input/output error Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg [EMAIL PROTECTED] zaptelrtc]# uname -a Linux localhost.localdomain 2.4.20-8custom #1 SMP Mon Sep 20 14:39:43 CDT 2004 i686 i686 i386 GNU/Linux Any ideas on the I/O error? syslog and dmesg show the same error. Nothing extra. Thanks, Matthew ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Current bristuff error report
On Thu, Sep 16, 2004 at 01:17:12PM +0200, Pawlowski Julian wrote: Hello, I just noticed an error in the current version of Klaus-Peter Junghanns bristuff package, especially in the HFC module. Everytime I try to unload the HFC module with modprobe -r I got a kernel panic and the complete server hangs up so I need to do a hard reset. Well, on my box I do a reload from (*) and! zaphfc every morning and it works. Using Debian unstable, Kernel-2427, bristuff010RC4a Regards, Julian Pawlowski ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Galaxy Voice Configuration Question
Hallo Kevin On Sun, 12 Sep 2004 22:25:41 -0400 you wrote: I am using Galaxy Voice until recently I can receive any inbound calls. Thats done via the register entry If I remove the [galaxy voice] context in my sip file the call rings in but I obviously can't make any outgoing calls. Any suggestions? Shure, looks like you have a entry inside your extensions.conf using the [galaxivoice] information from your sip.conf register=2125551212:pass:[EMAIL PROTECTED]/7600 [galaxyvoice] port=5060 fromuser=2125551212 fromdomain=216.229.127.40 username=user type=friend secret=pass auth=md5 host=216.229.127.40 defaultip=216.229.127.40 reinvite=no canreinvite=no dtmfmode=rfc2833 context=internal qualify=yes disallow=all allow=ulaw BTW, why do you hide your question within a thread??? Would be better to start a new one next time :) -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk make
GDay On Tue, Sep 14, 2004 at 12:36:01PM +0800, Dinesh wrote: cd ../asterisk # make clean; make install Hello when I do a make clean and make install, I get this error message on my asterisk box. bdb1.a stdtime/libtime.a -ldl -lpthread -lncurses -lm -lresolv -lssl /usr/bin/ld: cannot find -lssl ^ You need some ssl(ssl-dev) support Check your distro for more details on how it is called. collect2: ld returned 1 exit status make: *** [asterisk] Error 1 Any ideas? Dinesh. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] internal s0 using chancapi
On Sun, Sep 05, 2004 at 10:51:32PM +0200, [EMAIL PROTECTED] wrote: Hi, just a short question: Can I use * with chan-capi to build up an internal S0 (for ISDN)? No, cause chan_capi uses isdn-cards in TE mode. You will need a card in NT mode to connect a isdn-phone to. Therefor you need a isdn-card based on HFC chipset. See the wiki for details on zap(channels) and (zap)hfc. Also have a look at www.pbx4linux.de to get some basics. Regards and tia Daniel -- NEU: Bis zu 10 GB Speicher f?r e-mails Dateien! 1 GB bereits bei GMX FreeMail http://www.gmx.net/de/go/mail ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC- Colongne TE Mode
Hallo Junaid Saeed Uppal On Wed, 7 Jul 2004 15:41:49 +0500 you wrote: Hello There, I am trying to get Asterisk to work with Billion ISDN Adaptor, But i couldnt get isdn4linux to work. I am pretty new with isdn card but this is the only available option here right now , I've looked at this post and found that the author has been successful in installation of the same card. Can someone please help me out by giving the author's email address , so i can actually talk to him directly. ? or with configuration of this adaptor. I am using redhat 9 , default install. http://lists.digium.com/pipermail/asterisk-users/2004-February/037641.html i4l is the wrong way for that card! Have deep look in here: http://www.voip-info.org/tiki-index.php?page=Asterisk%20zaphfc This will help -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] missing .gsm in VoiceMailMain(2)
Hi Folks I try the following within context: exten = foo,foo,VoiceMailMain After providung MailBoxNumber I get asked for PassWord. If now the input fails I see on CLI Playing 'vm-incorrect' followed by Playing 'vm-password' and I can hear both messages. Next try is: exten = foo,foo,VoiceMailMain(MBNumber) which jumps straight to the MB and asks my for PW If now the input fails I see on CLI Playing 'vm-incorrect' followed by Playing 'vm-password' but I can hear only the 'vm-password' message. So, the sample is there, CLI shows that it is played but I can't hear anything! Version is CVS-04/25/04-01:56:59 Any hints? Thanks -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] missing .gsm in VoiceMailMain(2)
Hallo Jean-Yves Avenard On Tue, 6 Jul 2004 22:08:39 +1000 you wrote: On 06/07/2004, at 10:00 PM, Thomas Niesel wrote: I try the following within context: exten = foo,foo,VoiceMailMain After providung MailBoxNumber I get asked for PassWord. If now the input fails I see on CLI Playing 'vm-incorrect' followed by Playing 'vm-password' and I can hear both messages. Next try is: exten = foo,foo,VoiceMailMain(MBNumber) which jumps straight to the MB and asks my for PW Did you at least configure the mailbox and mailbox password in the mailbox.conf file? Jepp, shure What did you define foo as? it has to be a number Of course, I just post one line from the context. Jean-Yves ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] capi.so problem on startup
Hallo Tobi Anton On Wed, 23 Jun 2004 12:26:37 +0200 you wrote: Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with asterisk -c I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] = (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23 12:04:33 NOTICE[1075622560]: chan_capi.c:2654 load_module: this box has 1 capi controller(s) (...) == ast_capi_pvt(1272580,1272580,isdndefault,0,2) (0,0,64) == ast_capi_pvt(1272580,1272580,isdndefault,0,2) (0,0,64) Jun 23 12:04:33 WARNING[1075622560]: chan_capi.c:2784 load_module: Unused contr1 Jun 23 12:04:33 WARNING[1075622560]: channel.c:174 ast_channel_register_ex: Already have a handler for type 'CAPI' ^ Look like you try to load some modules more then once?! and here my modules.conf: ; Module Loader configuration file ; ; Asterisk configuration file ; ; Module Loader configuration file ; [modules] autoload=yes Here you set to load everything at startup... ; ; If you want, load the GTK console right away. ; Don't load the KDE console since ; it's not as sophisticated right now. ; noload = pbx_gtkconsole.so ;load = pbx_gtkconsole.so noload = pbx_kdeconsole.so ; ; Intercom application is obsoleted by ; chan_oss. Don't load it. ; noload = app_intercom.so ; ; Explicitly load the chan_modem.so early on to be sure ; it loads before any of the chan_modem_* 's afte rit ; load = chan_modem.so load = res_musiconhold.so Here you load some modules once again... Use autoload=yes together with noload=module_name Don't use load=modules_name too! Use autoload=no together with load=module_name. -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Outgoing DTMF when using BRI i4l (Eicon Diva) - problems
On Tue, Jun 15, 2004 at 07:43:32PM +1000, Shaun Ewing wrote: That's the last thing I wanted to hear :-( Apparently my ISDN card (Eicon Diva 2.02 as I mentioned) supports CAPI, but I've only been able to find Windows drivers for it. Have a look at http://www.melware.de Maybe that helps. -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] german localization for mailbox available?
On Mon, Jun 14, 2004 at 06:44:45PM +0200, Frank Sautter wrote: hi, i just wanted to ask if there is a german localization for the audio files of the mailbox available on the net. Shure! Just ask the wiki about voices it might share the secret with you :) regards frank sautter ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] chan_capi and DDI (Anlagenanschluss)
Hallo Holger Schurig On Mon, 7 Jun 2004 15:17:17 +0200 you wrote: Did you configure your CAPI driver to run in PTP mode? (not PTMP mode) Hmm, I guess you brought me on the rigth track. # cat /proc/capi/controllers/1 name fritz-pci io 0xA800 irq 5 type A1 class10 ver_driver 3.11-02 ver_cardtype fritz-pci protocol DSS1 linetype point to multipoint How can I change this? No way, sorry. Read the notes from avm, they don't support p2p for passive cards, only for active like b1,c2,c4. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] AVM B1 and PTP mode
Hallo Holger Schurig
On Mon, 7 Jun 2004 17:08:53 +0200 you wrote:
Hi !
I've fetched a spare AVM B1 card from the cellar, and installed it.
After modprobe b1pci I did capiinit and capiinit moaned about a
missing t1.b4.
Dont use modprobe, use capiinit start !
Configure the card via /etc/isdn/capi.conf
The capiinit will do all the rest :)
So I search the web and found one at
http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the
controller, I finally see p2p-mode:
Get latest Firmware from:
ftp://ftp.in-berlin.de/pub/capi4linux/firmware/b1/3-11-03/
# cat /proc/capi/controllers/1
name b1pciv4-a400
io 0xa400
irq 5
membase 0xf180
type B1 PCI
ver_driver 3.09-10
ver_cardtype B1
ver_serial 39032287
protocol DSS1
linetype point to point
cardname B1
csr (cached) 0x30004000
csr 0x30004000
txoff4
txlen0
rxoff0
rxlen4
Now, I compiled chan_capi-0.3.3 against Asterisk CVS head (of course
with CFLAGS+=-DUNSTABLE_CVS). And when I start now asterisk, it
hangs.
With some debugging statements I found out that it hangs right here in
chan_capi.c:
if (Listen(ALL_SERVICES) != 0) {
ast_log(LOG_NOTICE,unable to listen!\n);
return -1;
}
Any ideas?
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Tho/\/\as
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Syntax for 2 ISDN Cards
On Tue, Jun 01, 2004 at 11:34:28PM +0200, Gunnar Schaller wrote: ...cut When I try to make 3 simultaneous connections from SIP to ISDN the first and second one works, but on the third connection this happens: -- Executing Dial(SIP/gunnar-26ea, CAPI/7501:7986:bBYEXTENSION) in new stack chan_capi.c:1147 capi_request: didn't find capi device with outgoing msn = 7501. you should check your config! app_dial.c:673 dial_exec: Unable to create channel of type 'CAPI' == Everyone is busy at this time -- Executing Dial(SIP/gunnar-26ea, CAPI/7502:7986:bBYEXTENSION) in new stack chan_capi.c:1147 capi_request: didn't find capi device with outgoing msn = 7502. you should check your config! app_dial.c:673 dial_exec: Unable to create channel of type 'CAPI' == Everyone is busy at this time Do you have 4 b-channels? (2 Lines with 2 channels) According to your email you are in germany, there you need a 2nd NTBA. Well, I could be wrong at all, just my thoughts. -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Syntax for 2 ISDN Cards
On Wed, Jun 02, 2004 at 09:27:14AM +0200, Gunnar Schaller wrote: ...cut chan_capi.c:1147 capi_request: didn't find capi device with outgoing msn = 7502. you should check your config! app_dial.c:673 dial_exec: Unable to create channel of type 'CAPI' == Everyone is busy at this time Do you have 4 b-channels? (2 Lines with 2 channels) According to your email you are in germany, there you need a 2nd NTBA. Well, I could be wrong at all, just my thoughts. Yes there are 4 b-channels and yes it's germany :o) There are 2 lines with 2 b-channels each. My Asterisk operates at a internal telephone system. As I wrote I can do 2 simultaneous connections, in this case capi info shows that contr1 has no free channels. Next questions: Can you see any messages from 2nd line/card via isdnlog? Can you call your * via the other cards? What msn's do the two established calls use? Do you try to access a 3rd call with msn's from first line? Is it right that you have only two msn's in the capi.conf -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] outgoing MSN on zaphfc
Hi folks I'am looking for the right way to select the outgoing MSN on zaphfc for Euro-ISDN. I found some notes on the Wiki and I know it has to be done in the dialplan. Does anyone know the right way/code? THX -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] outgoing MSN on zaphfc
On Wed, May 26, 2004 at 05:54:52PM +0200, Julian Pawlowski wrote:
Hi Thomas!
you have to set the MSN this way for zaphfc when you use the dial command:
exten = _0Z.,5,Dial(CAPI/MyMSN:${EXTEN},90,mT)
zap=capi???
For Capi its clear but...
Maybe my mistake but I have zaphfc in TE Mode connected to TelCo and like
to use different MSN via the dialplan.
It could be that there is a code like *55(MY_MSN)# to prefix the call.
But I'am not shure if euroISDN has such thing.
Perhaps I'am totaly wrong??
It works with i4l, capi why not having the choice with zaphfc? :)
Of course you have to set MyMSN to your MSN.
Regards,
Julian
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Tho/\/\as
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] outgoing MSN on zaphfc
On Wed, May 26, 2004 at 08:29:19PM +0200, Klaus-Peter Junghanns wrote:
Hi,
like any other zaptel device, zaphfc uses the callerid from the
originating channel. If you want to override that callerid use:
exten = _X.,1,SetCallerID(MyMSN)
Light, light...
If you want to restrict the outgoing callerid (CLIR) make sure
you have usecallingpres=yes in zapata.conf and use:
exten = _X.,1,CallingPres(32)
Even more light, I can see now...:)
Thanks, exactly what I 'am looking for.
Even with the Handbook on PoP (PlainOldPaper) its sometimes better to have
someone who tells you things in another way:)
best regards
Klaus
--
Klaus-Peter Junghanns
CEO, CTO
Junghanns.NET GmbH
Breite Strasse 13a - 12167 Berlin - Germany
fon: (de) +49 30 79705390
fon: (uk) +44 870 1244692
fax: (de) +49 30 79705391
iaxtel: 1-700-157-8753
http://www.Junghanns.NET/asterisk/
Am Mi, 2004-05-26 um 20.04 schrieb Thomas Niesel:
On Wed, May 26, 2004 at 05:54:52PM +0200, Julian Pawlowski wrote:
Hi Thomas!
you have to set the MSN this way for zaphfc when you use the dial command:
exten = _0Z.,5,Dial(CAPI/MyMSN:${EXTEN},90,mT)
zap=capi???
For Capi its clear but...
Maybe my mistake but I have zaphfc in TE Mode connected to TelCo and like
to use different MSN via the dialplan.
It could be that there is a code like *55(MY_MSN)# to prefix the call.
But I'am not shure if euroISDN has such thing.
Perhaps I'am totaly wrong??
It works with i4l, capi why not having the choice with zaphfc? :)
Of course you have to set MyMSN to your MSN.
Regards,
Julian
--
Tho/\/\as
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] fax/sandsp segfaulting asterisk
On Tue, May 25, 2004 at 08:37:34AM -0600, Dan Cunningham wrote: I downgraded to 3.5.7 and that seemed to work, for others with this issue I just manually downloaded these packages from debian/testing and downgraded with dpkg -i libtiff*.pkg , this worked with no dependency problems. Think about to put this package on hold! -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] sip 4 fedora
Hallo Altus Snyman On Wed, 21 Apr 2004 09:54:42 +0200 you wrote: Do you have a copy for me,the page seems to be closed and it redirect me to http://swpat.ffii.org/ and I cant read that Thanks Try this: http://www.linphone.org/linphone.php?lang=usrubrique=1 On Wed, 2004-04-21 at 09:16, Tracy R Reed wrote: On Wed, Apr 21, 2004 at 09:20:54AM +0200, Altus Snyman spake thusly: I'm still looking for a SIP client that will work on fedora core 1? Thanks linphone? www.linphone.org ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Two AVM Fritz Card (hack does not work) what I am doing wrong?
Hallo Jakob Strebel On Tue, 23 Mar 2004 09:07:20 +0100 you wrote: Thomas, Thank you for your help. Which Kernel version do you run? I have debian 2.4.24, may be I could use your patched object code? I wrote: I do not use this I use the b1. Could you please send it to me if it makes sense. My primary mail is jakob-at-teamstrebel.ch Doing it this way would make my second ISDN line operational. Later I will track the problem and document it. ...up to you I viewed this article too and just found that you maybe made a mistake by changing only the source. Contact the author for further information. I will do that and add the result to the Documentation. or use one PCI and one ISA card to get around! (???) My board does not have any ISA slots You also could ask AVM to supply a driver who is able to handle more cards... I asked AVM. They like to sell the 2port and 4port card, which are significant more expensive. May be this is the reason for this limitation that the Fritz driver supports only one card. Shure, just think of using 2 cheap cards instead of selling expensive... jakob ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Convert ISDN Card in NT Mode
Hallo Ignace CARIA On Tue, 23 Mar 2004 09:35:27 +0100 you wrote: Hello everybody, I try to connect directly to Asterisk an ISDN DECT base station. Here is the scheme: ISDN Line--ISDN CARD(CAPI)--+Asterisk+--ISDN CARD(???)-DECT Base station. My question is: is it possible to convert the second ISDN card into NT-Mode? If yes, which card must I use? How should I configure it? Checkout: http://www.voip-info.org and look for zaphfc and http://isdn.jolly.de Thank you Ignace ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Two AVM Fritz Card (hack does not work) what I am doing wrong?
Hallo Jakob Strebel On Mon, 22 Mar 2004 18:27:44 +0100 you wrote: Hi, I tried to install the following hack. http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO But the 2nd AVM Fritz PCI card is still not showing up. My environment is: debian 2.4.24 (asterisk 0.72) Just a quick explanation what I did: - edited the filed as described above - make clean - make - make install - reboot my machine - modprobe capi - insmod -f fcpci What do I miss? What did I do wrong? regards jakob asterisk:~# lsmod Module Size Used byTainted: PF fcpci 532320 2 ^^^OK 1 card found capi6528 4 kernelcapi 30624 3 [fcpci capi] capiutil 22912 0 [kernelcapi] asterisk:~# asterisk:/var/log# capiinit start modprobe: Can't locate module capifs modprobe: Can't locate module capifs WARNING: filesystem capifs not available modprobe: Can't locate module f2pci ^No module for the second one ERROR: failed to load driver f2pci asterisk:/var/log# ...cut Looks like you did not all the steps! Don't edit the source, you have to edit the binary file! Read and do it once again like the README says. -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Two AVM Fritz Card (hack does not work) what I am doing wrong?
Hallo Jakob Strebel On Mon, 22 Mar 2004 22:56:09 +0100 you wrote: Thomas, I restarted the hack and found that I did not edit all the files in src.drv. My mistake sorry. No prob. ...cut So I fixed this, changed all _fcpci_ to _f2pci_. Now I am running into a new problems. IF I change _fcpci_ to f2pci in defs.h (but change all fcpci to f2pci in driver.c and main.c )then I get the following error: ...cut Sorry but I dont use this. I viewed this article too and just found that you maybe made a mistake by changing only the source. Contact the author for further information or use one PCI and one ISA card to get around! (???) You also could ask AVM to supply a driver who is able to handle more cards... -- Tho/\/\as ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
