R: [Asterisk-Users] TE110P Cable Pin Out
I think you can use normal network cable, I'm from Italy and it's work perfectly Good luck -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Miloš Kocbek Inviato: mercoledì 27 luglio 2005 10.04 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] TE110P Cable Pin Out PRI CARD PINS 1 GREEN 2 RED 3 4 YELLOW 5 BLACK 6 7 8 PROVIDER PINS 1 2 3 YELLOW 4 GREEN 5 RED 6 BLACK 7 8 this setting work for us. We are located in slovenia, europe. On 7/27/05, Paul Dracevich [EMAIL PROTECTED] wrote: I have just got a TE110P card, and I need the cable pin out. Thanks -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.5/58 - Release Date: 7/25/2005 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] I found problem with TE110P and the new kernel of fedora, kernel panic
I installed a new fedora 3 and i did the yum update, In this way I upgrade the kernel 2.6.11-35, before I used the 2.6.9-77 for fedora and it was work perfectly no problem. When I made the upgrade I got the kernel panic every time that I remove the drivers or restart the computer. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
R: [Asterisk-Users] Sound Quality Problems
Try to use 2.6.10 kernel not 2.6.12.3 kernel Coz I got some problems with the kernel 2.6.12, I had the same Digium Wildcard TE110P, Good luck Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Robert Christian Inviato: martedì 26 luglio 2005 19.13 A: asterisk-users@lists.digium.com Oggetto: [Asterisk-Users] Sound Quality Problems Thanks for reading this. Ive been pulling hair for days trying to resolve this, and any help someone can give me would be very much appreciated. I have an Asterisk box that is basically a P4-3GHz, a Digium-recommended SuperMicro X5SSE-GM motherboard, 2GB RAM, 250GB IDE hard-drive with UDMA, a SoundBlaster Live! 24 sound card, a Digium Wildcard TE110P, and a Digium Wildcard TDM400P with 4 FXS modules. Right now the Ethernet is hooked up directly to a single VoIP phone (Grandstream GXP-2000). Im running kernel 2.6.12.3. THE PROBLEM: The problem I am having is when using the speakers hooked into the SB Live! 24 card. When I call through like an intercom (my intention) and have the dialplan play an announcement (for testing purposes, I have used both the included you-sound-cute and lots-o-monkeys), its very choppy to the point of being laughably unacceptable. Then when I talk over the intercom, my voice sounds just as choppy. Interestingly enough, when I go to the console and dial the demo included in the Asterisk sample configuration files (which I left in for testing), the womans voice sounds fine (for 8KHz anyway). But the demo is an IVR menu, and when I dial 2 for more information (for example), it starts playing the next message all choppy. I have read hundreds of mailing list posts and dozens of how-tos and diagnostics suggestions online. Ive tweaked out motherboard settings, kernel options, hard drive parameters, etc. with no success. Ive tried literally dozens of ALSA configurations thinking that the problem could be there. Ive focused on kernel and IRQ optimizing, ALSA configuration, Asterisk configuration, and Zaptel configuration (in case its a timing problem) with no success. I have been completely unable to resolve this problem. I have a PRI line on its way, but since zttest suggests the internal timing of the TE110P is accurate within Digium specs, I dont think external synchronization will help anything. Maybe the SB Live! 24 isnt the best card to use for the console intercom on this system. But supposedly ALSA has full support for it. Any help at all is greatly appreciated. Thank you. - Robert ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
R: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap'
I got the same problem yesterday and i just ch'ange the kernel from 2.6.12-1.1372_FC3 to 2.6.9 kernel of fedora core 3, and now it work perfectly. I think there is some problems with the new kernel of fedora. -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Altus Snyman Inviato: mercoledì 27 luglio 2005 13.45 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] Zaptel error: Unable to create channel op type'Zap' I just did the modprobe 2 times and it worked but that was on the 2.6.9 kernel Something about core 3 taking its time to create the device modprobe zaptel sleep 3 modprobe zaptel :-) Peter Raaijmakers wrote: Hi, In struggeling with this problem for a two weeks now. I have a X100P clone card in my * box but I'm not able to get it to run. I'm running fedora core 3 with kernel 2.6.12-1.1372_FC3 on a VIA EPIAML500EA The compiling of both zaptel and asterisk went without any errors. I can run zaptel and asterisk without any errors. When I run ztcfg I don't get any errors too. But when I try to place a call trough my x100p I get this error message in asterisk: NOTICE app_dial.c:1091 dial_exec_full: Unable to create channel op type 'Zap' Outside calls are not comming in either. Here are my zapata.conf and zaptel.conf: -zapata.conf- [channels] signalling=fxs_ks context=incoming channel=1 -zaptel.conf- loadzone = nl defaultzone=nl fxsks=1 --- The funny part comes here: I'm installing a *box for a friend with a ISDN card and the same problem occures. So I probarbly doing something wrong in fedora... Any ideas??? Thanks, Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
R: [Asterisk-Users] Quadbri trouble
I got the same problem, and what i change it was point-to-point to point-to-multi-point, and I used normal patch cable to connect the ISDN card to ISDN connector, and I used TE mode. In italy work like that I hope that will help you, I used also bristuff. Good luck Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di [EMAIL PROTECTED] Inviato: martedì 19 luglio 2005 16.23 A: asterisk-users@lists.digium.com Oggetto: [Asterisk-Users] Quadbri trouble Hi, I'm trying to configure a quadbri card using the configuration found in Bristuff. I know the configuration of telco is point-to-point and I think the card have to work in NT mode (I presume because I have not found the documentation about this and when attach to the ISDN the led become green). I'm not able to make and receive call. When I receive a call nothing happen in the asterisk cli and from the caller I receive a connection error. When I try to make a call I receive unable to create zap channel THis is my configuration: Zapata.conf switchtype = euroisdn signalling = bri_net pridialplan = local prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 echocancel = yes context=default group = 1 ; S/T port 1 channel = 1-2 signalling = bri_net group = 2 ; S/T port 2 channel = 4-5 signalling = bri_net group = 3 ; S/T port 3 channel = 7-8 signalling = bri_net group = 4 ; S/T port 4 channel = 10-11 signalling = bri_net Zaptel.conf loadzone=it defaultzone=it span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 Bye ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
R: [Asterisk-Users] zaphfc: empty HDLC frame or bad CRC received
I found the same problem, u have to use normal patch cable to connect from ISDN card to ISDN connector, And u r in italy I think, in italy u have to use p2mp TE mode signalling=bri_cpe_ptmp, with telcom, Good luck -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Per conto di Marc Sutter Inviato: lunedì 18 luglio 2005 18.58 A: Asterisk Users Mailing List - Non-Commercial Discussion Oggetto: Re: [Asterisk-Users] zaphfc: empty HDLC frame or bad CRC received there is a list item about this issu: http://lists.digium.com/pipermail/asterisk-users/2004-November/070918.html alternatively you can try this solution on debian: # 4)Modules configuration for startup with zaphfc AND wcfxs on # debian stable 3.1 sarge kernel 2.4.27-2-386 # Here a configuration to fix this issue at boottime emacs /etc/modutils/zaptel # match it to: post-install zaphfc /sbin/ztcfg #post-install tor2 /sbin/ztcfg #post-install wcusb /sbin/ztcfg #post-install wcfxo /sbin/ztcfg #post-install ztdynamic /sbin/ztcfg #post-install ztd-eth /sbin/ztcfg #post-install wct1xxp /sbin/ztcfg #post-install wct4xxp /sbin/ztcfg #post-install wcte11xp /sbin/ztcfg alias wctdm wcfxs #post-install torisa /sbin/ztcfg #post-install wcfxs /sbin/ztcfg # end of file /etc/modutils/zaptel #Update the /etc/modules.conf file with: [EMAIL PROTECTED] update-modules [EMAIL PROTECTED] emacs /etc/modules # add a line like the following at end of the file zaphfc # and finaly reboot for testing [EMAIL PROTECTED] reboot On jeu, 2005-07-07 at 18:18 +0200, Yousef Herzallah wrote: I have this problem zaphfc: empty HDLC frame or bad CRC received My configurations are cat /proc/zaptel/1 Span 1: ZTHFC1 HFC-S PCI A ISDN card 0 [NT] layer 1 ACTIVATED (G3) AMI/CCS 1 ZTHFC1/0/1 Clear 2 ZTHFC1/0/2 Clear 3 ZTHFC1/0/3 HDLCFCS cat /etc/zaptel.conf # hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=it defaultzone=it span=1,1,3,ccs,ami bchan=1-2 dchan=3 cat /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] language=it switchtype=euroisdn ; p2mp TE mode ;signalling=bri_cpe_ptmp ; p2p TE mode ;signalling=bri_cpe ; p2mp NT mode ;signalling=bri_net_ptmp ; p2p NT mode signalling=bri_net pridialplan=dynamic prilocaldialplan=local nationalprefix=0 internationalprefix=00 echocancel=yes echotraining=100 echocancelwhenbridged=yes immediate=yes group=1 context=default channel = 1 channel = 2 ztcfg -vv Zaptel Configuration == SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. Help ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Two ISDN cards on same machine
Hi everybody, I have a Asterisk installation working with a Digi card (HFC-S PCI A ISDN card) and another Asterisk installation with a Digium (Digium Wildcard TE110P T1/E1 Card). For Digium I used zaptel drivers but Digi works with bristuff drivers. Both installations work fine and are connected to two different phone lines. What I want to do is let calls incoming on the Digi installation be redirected to the Digium card. I am wondering if it's possible doing something like this (I think it's possible changing my Digi dialplan), and above all if it's possible to have Digi and Digium cards installed on the same machine. Thanks all, Yousef Herzallah winmail.dat___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] zaphfc: empty HDLC frame or bad CRC received
I have this problem zaphfc: empty HDLC frame or bad CRC received My configurations are cat /proc/zaptel/1 Span 1: ZTHFC1 HFC-S PCI A ISDN card 0 [NT] layer 1 ACTIVATED (G3) AMI/CCS 1 ZTHFC1/0/1 Clear 2 ZTHFC1/0/2 Clear 3 ZTHFC1/0/3 HDLCFCS cat /etc/zaptel.conf # hfc-s pci a span definition # most of the values should be bogus because we are not really zaptel loadzone=it defaultzone=it span=1,1,3,ccs,ami bchan=1-2 dchan=3 cat /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] language=it switchtype=euroisdn ; p2mp TE mode ;signalling=bri_cpe_ptmp ; p2p TE mode ;signalling=bri_cpe ; p2mp NT mode ;signalling=bri_net_ptmp ; p2p NT mode signalling=bri_net pridialplan=dynamic prilocaldialplan=local nationalprefix=0 internationalprefix=00 echocancel=yes echotraining=100 echocancelwhenbridged=yes immediate=yes group=1 context=default channel = 1 channel = 2 ztcfg -vv Zaptel Configuration == SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: D-channel (Default) (Slaves: 03) 3 channels configured. Help ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Can't switch span to E1-mode
Hi, This error I got it just when I gonfigure zaptel support isdneuro 31 channels. But if I configure zaptel to support T1 and just 24 channels I have no problem. # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # loadzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-23 dchan=16 bchan=17-31 [EMAIL PROTECTED] etc]# cat /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file ; ; You need to restart Asterisk to re-configure the Zap channel ; CLI reload chan_zap.so ; will reload the configuration file, ; but not all configuration options are ; re-configured during a reload. [channels] signalling=pri_cpe immediate=no switchtype=EuroISDN pridialplan=unknown context=incoming usecallerid=yes group=1 channel = 1-23 channel = 17-31 [EMAIL PROTECTED] etc]# /etc/init.d/zaptel restart Unloading zaptel hardware drivers: wcusb wctdm wcfxo wcte11xp wct1xxp wct4xxp tor2. Removing zaptel module:[ OK ] Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules:Running ztcfg: ZT_CHANCONFIG failed on channel 25: No such device or address (6) [FAILED] [EMAIL PROTECTED] etc]# dmesg TE110P: Setting up global serial parameters for T1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 [EMAIL PROTECTED] etc]# ztcfg -v Zaptel Configuration == SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) 31 channels configured. ZT_CHANCONFIG failed on channel 25: No such device or address (6) Now I'll show how it work with 24 channels [EMAIL PROTECTED] etc]# dmesg TE110P: Setting up global serial parameters for T1 FALC V1.2 TE110P: Successfully initialized serial bus for card Found a Wildcard: Digium Wildcard TE110P T1/E1 Registered tone zone 11 (Italy) TE110P: Span configured for ESF/B8ZS Calling startup (flags is 4099) wcte1xxp: Setting yellow alarm TE110P: Span configured for ESF/B8ZS Calling startup (flags is 4099) Registered tone zone 11 (Italy) TE110P: Span configured for ESF/B8ZS Calling startup (flags is 4099) Registered tone zone 11 (Italy) usbcore: registered new driver wcusb Wildcard USB FXS Interface driver registered TE110P: Span configured for ESF/B8ZS Calling startup (flags is 4099) Registered tone zone 11 (Italy) TE110P: Span configured for ESF/B8ZS Calling startup (flags is 4099) Registered tone zone 11 (Italy) And no errors. Help, ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] [Help] ZT_CHANCONFIG failed on channel 25
Hi, I a new user of asterisk, I'm trying to in install zaptel drivers on my ISDN card Digium Tiger 3xx TE110P. And my configuration is # # Zaptel Configuration File # span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = it ; ; ; Zapata Configuration file ; [channels] immediate=no switchtype=EuroISDN signalling=pri_cpe pridialplan=unknown context=incoming usecallerid=yes group=1 channel = 1-15,17-31 when I lunch the zaptel sevice I got this problem. Loading zaptel framework: [ OK ] Waiting for zap to come online...OK Loading zaptel hardware modules:Running ztcfg: ZT_CHANCONFIG failed on channel 25: No such device or address (6) [FAILED] I need help ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] ERROR[5539]: chan_zap.c:9750 setup_zap: Unable to load config zapata.conf
Hi, I have this error, I have a digium card TE110P Tiger3xx When I'm load the dirvers by this command modprobe wcte11xp I got this error Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for wct1xxp when I'm Lunch the command ztcfg -vv I got this error. Zaptel Configuration == SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) Channel 02: Individual Clear channel (Default) (Slaves: 02) Channel 03: Individual Clear channel (Default) (Slaves: 03) Channel 04: Individual Clear channel (Default) (Slaves: 04) Channel 05: Individual Clear channel (Default) (Slaves: 05) Channel 06: Individual Clear channel (Default) (Slaves: 06) Channel 07: Individual Clear channel (Default) (Slaves: 07) Channel 08: Individual Clear channel (Default) (Slaves: 08) Channel 09: Individual Clear channel (Default) (Slaves: 09) Channel 10: Individual Clear channel (Default) (Slaves: 10) Channel 11: Individual Clear channel (Default) (Slaves: 11) Channel 12: Individual Clear channel (Default) (Slaves: 12) Channel 13: Individual Clear channel (Default) (Slaves: 13) Channel 14: Individual Clear channel (Default) (Slaves: 14) Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) Channel 18: Individual Clear channel (Default) (Slaves: 18) Channel 19: Individual Clear channel (Default) (Slaves: 19) Channel 20: Individual Clear channel (Default) (Slaves: 20) Channel 21: Individual Clear channel (Default) (Slaves: 21) Channel 22: Individual Clear channel (Default) (Slaves: 22) Channel 23: Individual Clear channel (Default) (Slaves: 23) Channel 24: Individual Clear channel (Default) (Slaves: 24) Channel 25: Individual Clear channel (Default) (Slaves: 25) Channel 26: Individual Clear channel (Default) (Slaves: 26) Channel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) my configuration are /etc/zaptel.conf span=1,1,0,esf,b8zs bchan=1-15,17-31# set this to 1-15,17-31 for E1 dchan=16# set this to 16 for E1 defaultzone=it loadzone=it /etc/asterisk/zapata.conf signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master switchtype=euroisdn echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs. echocancelwhenbridged=yes ; Asterisk trains to the beginning of the call, number is in milliseconds echotraining=400 callerid=asreceived group=1 context=default ; Points to the default context of your extensions.conf channel = 1-15,17-31 ; Set this to 1-15,17-31 for E1 In the end of the [default] context of extensions.conf file exten = 1234567,1,Dial,Zap/g1/${EXTEN} ; Press any 7 digit number and try to dial that number through Zap channel 1 exten = s,1,Wait(1) exten = s,2,Answer exten = s,2,Playback(demo-congrats) ; Plays the demo-congrats file after answering the line exten = s,3,Hangup Thank you, ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] ERROR[6504]: chan_zap.c:6710 mkintf: Channel 24 is reserved for D-channel.
Now I have this errors When I lunch this command I got modprobe wcte11xp This error: Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for wcte11xp And when I lunch this command ztcfg -vv I got these: Zaptel Configuration == SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Individual Clear channel (Default) (Slaves: 01) . . . Channel 15: Individual Clear channel (Default) (Slaves: 15) Channel 16: D-channel (Default) (Slaves: 16) Channel 17: Individual Clear channel (Default) (Slaves: 17) . . . Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. ZT_CHANCONFIG failed on channel 25: No such device or address (6) And when I lunch this command asterisk -vvvgc I got these: . . . -- Registered channel 23, PRI Signalling signalling Jun 14 13:50:58 ERROR[6493]: chan_zap.c:6710 mkintf: Channel 24 is reserved for D-channel. Jun 14 13:50:58 ERROR[6493]: chan_zap.c:9910 setup_zap: Unable to register channel '1-15' Jun 14 13:50:58 WARNING[6493]: loader.c:402 __load_resource: chan_zap.so: load_module failed, returning -1 And in the final of . . . . -- Unregistered channel 22 Jun 14 13:50:58 WARNING[6493]: loader.c:523 load_modules: Loading module chan_zap.so failed! [EMAIL PROTECTED] /]# Ouch ... error while writing audio data: : Broken pipe ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users