Re: [Asterisk-Users] Budge Tone-100 as a Ext in the LAN
Grandstream has been very well detailed on the wiki. www.voip-info.org - Original Message - From: luke devon To: Astericks Sent: Friday, January 06, 2006 6:10 AM Subject: [Asterisk-Users] Budge Tone-100 as a Ext in the LAN HI , I installed asterisk in fedora core 3 machine perfectly. and i have 10 units of GrandStream IP phone ( Budge Tone-100 ) . I wanted to know how can i use it as extentions in my LAN ? Asterisk PBX alredy there. I didn't try to do any configurations of any files . What are the configurations has to be made with asterisk ? Thanx in advance, Luke. Send instant messages to your online friends http://uk.messenger.yahoo.com ___--Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users No virus found in this incoming message.Checked by AVG Free Edition.Version: 7.1.371 / Virus Database: 267.14.14/222 - Release Date: 1/5/2006 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] GSM Gateway / Terminal for sale
I have got one and and is working fine. It's exactly for cards lying around still inside their 12-month contracts.. Actually it's full extend PnP-SIM-card-GSM-gateway(I forgot to unlock the pin:) so keep this in mind). There are 2 fxs ports, but I use just one; points to a SPA3000. The other could go to a phone set, too(I did test it) And that's it... pretty much . Anything else you want to do is * job and dial plans. When one calls from outside, first is getting authenticated against CallerId and could then dial internal or any other destination. It's a week I have it and works no problem. It is a little big, but much cheaper than other solutions, I have checked around. Sounds pretty cool! Is the antenna detachable? Can you replace it with a longer antenna which can be stuck somewhere with decent GSM reception? Cheers, Jean-Michel. Can it be used to send SMS via asterisk? Thanks, Steve ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] TE110p and pri_cpe signalling not recognized
I had this problem and while not 100% sure. I think the solution was whitespace at the end of the lines in the conf file. Opened the file with vi, went to each line and hit end to make sure there were no extra spaces, there were, removed them, rebooted and issue went away. Hi guys, I've been installing and configuring a TE110p card. The compile and install went very well. I'm using this on FC4 and I compile with linux26 as well checked I on the udev configs. zttool and ztcfg both indicate that the card is ready. But when I try to load chan_zap.so then I get the following Unable to load module chan_zap.so Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10546 setup_zap: Unknown signalling method 'pri_cpe' Jan 5 21:43:33 ERROR[6808]: chan_zap.c:10171 setup_zap: Signalling must be specified before any channels are. Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1 My config is here below. TIA Arnar Gestsson /etc/zaptel.conf span=1,1,0,ccs,hdb3,crc4 loadzone = nl loadzone=de defaultzone=nl bchan=1-5,7-15,17-31 dchan=16 /etc/asterisk/zapata.conf [trunkgroups] trunkgroup = 1,16 spanmap = 1,1 [channels] language=en context=default switchtype=euroisdn pridialplan=unknown signalling=pri_cpe ;rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=5.0 txgain=1.0 echotraining=yes group=1 callgroup=1 pickupgroup=1 immediate=no channel = 1-15,17-31 -- Arnar Gestsson [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.371 / Virus Database: 267.14.13/221 - Release Date: 1/4/2006 ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
