[Asterisk-Users] 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my *
Hello, I have 2 analogue ports on an AlcatelPBX patched to 2 FXO ports on my *@home 2.8 running on top of CentOS. Both FXO Ports are on ONEDigium card. What I would like is: If someone calls extn 281 on myAlcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4If someone calls extn 282 on myAlcatel PBX it is routed through to Extn 234 on my * thruogh FXO Port/module 3 I have SIP extn 233 set up.I have SIP extn 234 set up. I have one inbound route set up as any DID / any CID with a destination set to 233 (calling 281 from myAlcatel doesring on 233).I have one zap channel set up in trunks as ZAP/g0. Currentzapata-auto.config: ; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit ; Zaptel Channels Configurations (zapata.conf) ; ; This is not intended to be a complete zapata.conf. Rather, it is intended ; to be #include-d by /etc/zapata.conf that will include the global settings ; callerid=asreceived ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" ; channel 1, WCTDM, inactive. ; channel 2, WCTDM, inactive.signalling=fxs_ks ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 3 context=from-pstn group=0 channel = 3 signalling=fxs_ks ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4context=from-pstn group=0 channel = 4 ; Span 2: ZTDUMMY/1 "ZTDUMMY/1 1" My problem is getting 234 to answer when I dial 282 from the Alcatel as I have nothing set up for it and don't seem to be able to work out how to direct different FXO ports to different * extns. I am told that my Alcatel is not passing any info (DID number etc) down the line Any help would be greatfully appreciated. Regards Andy GreenIT ManagerGBeyeLtd1 Russell StKelham IslandSheffieldS3 8RW Tel: 0114 252 1611Fax: 0114 272 9599 mailto:[EMAIL PROTECTED]http://www.businessgbeye.com Please read: CHANGE OF COMPANY NAME. As of 1st January 2006 GB Posters Ltd will be known as GB eye Ltd, please update all records and email addresses: Please replace everything after the @ in email addresses with gbeye.com (e.g. [EMAIL PROTECTED] is now [EMAIL PROTECTED]) The GB eye Ltd business website can be found at http://www.businessgbeye.com, please update your bookmarks and favourites. This e-mail is intended for the addressee(s) named above and any other use is prohibited. It may contain confidential information. If you received this e-mail in error please contact the sender by return e-mail. GB eye Ltd does not accept legal responsibility for the contents of this message if it has reached you via the Internet. Any opinions expressed are those of the author and are not necessarily endorsed by GB eye Ltd. Recipients are advised to apply their own virus checks to this message and all incoming email on delivery. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my *
well, on analog lines you generally you won't have incoming DID informations; so you'll have all calls routed to extension 's' in the context defined for that channels. By the way, you can check in the dialplan which zap channel number the call is coming in from. To do this, you have to extract the channel number with some string manipulation: Zap incoming channel names come in this form Zap/channum-additionaluniqueid So you have to CUT the channel name two times to obtain the zap channel number. Example: ...suppose call is coming in from channel 4 [from-pstn] ;CHANNEL is Zap/4-someexten = s,1,Set(channum=${CUT(CHANNEL|-|1)}) ; channum is now Zap/4 exten = s,2,Set(channum=${CUT(channum|/|2)}) ; channum is now 4 exten = s,3,Gotoif(${channum}=3?233|1) ; go to 233 if channel is 3 exten = s,4,Gotoif(${channum}=4?234|1) ; go to 234 if channel is 4 ... you can add as many as you want... exten = s,n,Goto(233) ; go to your default extension if channel is different from ;the ones specified above ... exten = 233,1,Dial(SIP/233) exten = 234,1,Dial(SIP/234) Hope this helps... 2006/4/26, Andy Green [EMAIL PROTECTED]: Hello, I have 2 analogue ports on an AlcatelPBX patched to 2 FXO ports on my *@home 2.8 running on top of CentOS. Both FXO Ports are on ONEDigium card. What I would like is: If someone calls extn 281 on myAlcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4If someone calls extn 282 on myAlcatel PBX it is routed through to Extn 234 on my * thruogh FXO Port/module 3 I have SIP extn 233 set up.I have SIP extn 234 set up. I have one inbound route set up as any DID / any CID with a destination set to 233 (calling 281 from myAlcatel doesring on 233). I have one zap channel set up in trunks as ZAP/g0. Currentzapata-auto.config: ; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit ; Zaptel Channels Configurations (zapata.conf) ; ; This is not intended to be a complete zapata.conf. Rather, it is intended ; to be #include-d by /etc/zapata.conf that will include the global settings ; callerid=asreceived ; Span 1: WCTDM/0 Wildcard TDM400P REV I Board 1 ; channel 1, WCTDM, inactive. ; channel 2, WCTDM, inactive.signalling=fxs_ks ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 3 context=from-pstn group=0 channel = 3 signalling=fxs_ks ; Note: this is a trunk. Create a ZAP trunk in AMP for Channel 4context=from-pstn group=0 channel = 4 ; Span 2: ZTDUMMY/1 ZTDUMMY/1 1 My problem is getting 234 to answer when I dial 282 from the Alcatel as I have nothing set up for it and don't seem to be able to work out how to direct different FXO ports to different * extns. I am told that my Alcatel is not passing any info (DID number etc) down the line Any help would be greatfully appreciated. Regards Andy GreenIT ManagerGBeyeLtd 1 Russell StKelham IslandSheffieldS3 8RW Tel: 0114 252 1611Fax: 0114 272 9599 mailto:[EMAIL PROTECTED] http://www.businessgbeye.com Please read: CHANGE OF COMPANY NAME. As of 1st January 2006 GB Posters Ltd will be known as GB eye Ltd, please update all records and email addresses: Please replace everything after the @ in email addresses with gbeye.com (e.g. [EMAIL PROTECTED] is now [EMAIL PROTECTED]) The GB eye Ltd business website can be found at http://www.businessgbeye.com, please update your bookmarks and favourites. This e-mail is intended for the addressee(s) named above and any other use is prohibited. It may contain confidential information. If you received this e-mail in error please contact the sender by return e-mail. GB eye Ltd does not accept legal responsibility for the contents of this message if it has reached you via the Internet. Any opinions expressed are those of the author and are not necessarily endorsed by GB eye Ltd. Recipients are advised to apply their own virus checks to this message and all incoming email on delivery. ___ --Bandwidth and Colocation provided by Easynews.com --Asterisk-Users mailing listTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my *
What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my * thruogh FXO Port/module 3 I have SIP extn 233 set up. I have SIP extn 234 set up. snip My problem is getting 234 to answer when I dial 282 from the Alcatel as I have nothing set up for it and don't seem to be able to work out how to direct different FXO ports to different * extns. The most simple way is something like this : in your zapata.conf, or in your case, zapata-auto.conf (remember that if you run genzaptelconf, this file will be overwritten and all changes will be lost), modify it to put each ZAP channel in is own context ex.: context=from-pstn-line1 group=0 channel = 3 context=from-pstn-line2 channel = 4 then, in extension.conf (or for aah, in extension_custom.conf), define those 2 context [from-pstn-line1] exten = s,1,Answer exten = s,n,Dial(Sip/233,20) exten = s,n,Voicemail(u233) [from-pstn-line2] exten = s,1,Answer exten = s,n,Dial(Sip/234,20) exten = s,n,Voicemail(u234) N.B.: this is written from the top of my head, so it may contain some errors but it gives you the direction hth ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users