Re: [Asterisk-Users] AVM Fritz crash
Hallo Steve Hill On Tue, 25 Jan 2005 09:49:05 + (GMT) you wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > On Tue, 25 Jan 2005, Thomas Niesel wrote: > > >> Does anyone have any suggestions? > >> > > Quick shot: > > SMP, HT? > > It is an SMP machine but it's only running a uniprocessor kernel ATM (I > tried the driver in SMP mode and it crashed in a completely different > way so I thought it might be better to debug the problem in UP mode > which would hopefully be slightly more tested - in SMP mode the module > modprobes ok but if you cat /proc/capi/controllers/1 then it > immediately oopses). Hm... > > > IRQ? > > Try other slot. > > I've tried several slots with the same results. Ok > > > Do you modprobe/insmod the module by hand or via ? > > Modprobed by hand. Do you have a valid capi.conf (for the card, not for asterisk) Try using capiinit start. Finally try another card or try the card in another box > > I'm currently running the Fedora Core 3 2.6.10-1.741_FC3 kernel and it's > on Athlon hardware. > >- Steve Jabber: [EMAIL PROTECTED] Web: >http://www.nexusuk.org/ > >Servatis a periculum, servatis a maleficum - Whisper, Evanescence > > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.2.6 (GNU/Linux) > Comment: Public key available at http://www.nexusuk.org/pubkey.txt > > iD8DBQFB9hYS5zUOsIV3bqERAokeAJ9zMNa3j6umz0/dkxzD4BbeqzaRNQCfdJnI > QuoEpGtwYZHD+1vo2SVSA5I= > =pZZR > -END PGP SIGNATURE- > ___ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: >http://lists.digium.com/mailman/listinfo/asterisk-users > -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] AVM Fritz crash
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 25 Jan 2005, Thomas Niesel wrote: Does anyone have any suggestions? Quick shot: SMP, HT? It is an SMP machine but it's only running a uniprocessor kernel ATM (I tried the driver in SMP mode and it crashed in a completely different way so I thought it might be better to debug the problem in UP mode which would hopefully be slightly more tested - in SMP mode the module modprobes ok but if you cat /proc/capi/controllers/1 then it immediately oopses). IRQ? Try other slot. I've tried several slots with the same results. Do you modprobe/insmod the module by hand or via ? Modprobed by hand. I'm currently running the Fedora Core 3 2.6.10-1.741_FC3 kernel and it's on Athlon hardware. - Steve Jabber: [EMAIL PROTECTED] Web: http://www.nexusuk.org/ Servatis a periculum, servatis a maleficum - Whisper, Evanescence -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Public key available at http://www.nexusuk.org/pubkey.txt iD8DBQFB9hYS5zUOsIV3bqERAokeAJ9zMNa3j6umz0/dkxzD4BbeqzaRNQCfdJnI QuoEpGtwYZHD+1vo2SVSA5I= =pZZR -END PGP SIGNATURE- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] AVM Fritz crash
On Mon, Jan 24, 2005 at 04:31:33PM +, Steve Hill wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > > Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to > work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM > Fritz CAPI driver from the AVM website and compiled against the current > kernel. However, as soon as I modprobe it I get: > CAPI Subsystem Rev 1.1.2.8 > fcpci: module license 'Proprietary' taints kernel. > fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2 > fcpci: (fcpci built on Jan 24 2005 at 13:51:46) > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 > ACPI: PCI interrupt :00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 > fcpci: AVM FRITZ!Card PCI found: port 0x1c00, irq 11 > fcpci: Loading... > fcpci: Driver 'fcpci' attached to stack. (152) > Unable to handle kernel paging request at virtual address ff00 > printing eip: > e0bbe503 > *pde = 2067 > Oops: [#1] > Modules linked in: fcpci(U) kernelcapi nfsd exportfs lockd parport_pc lp > parport md5 ipv6 autofs4 sunrpc video button battery ac ohci_hcd > i2c_amd756 i2c_core crc_ccitt isdn slhc r8169 3c59x floppy dm_snapshot > dm_zero dm_mirror ext3 jbd dm_mod > CPU:0 > EIP:0060:[]Tainted: P VLI > EFLAGS: 00010217 (2.6.10-1.741_FC3) > EIP is at memcpy+0x13/0x30 [fcpci] > eax: e0bbee4f ebx: dc1a403c ecx: 382efb93 edx: e0c14e54 > esi: ff00 edi: e0bbe45e ebp: dbb80e90 esp: dbb80e88 > ds: 007b es: 007b ss: 0068 > Process modprobe (pid: 3995, threadinfo=dbb8 task=db4bae50) > Stack: d995b884 da7224cc e0c0d389 e0bbe45e ff00 e0bbee4f > 1c02 >1c02 0246 0014 dc1a4004 dc1a403c dc1a4004 ffed > e0c0d64c >dc1a4004 e0c0c53f dc1a4058 dc1a4004 e0c0c96d dfc1b000 dfc1b000 > ffed > Call Trace: > [] lock_init+0x3e/0x5b [fcpci] > [] CA_MSEC+0xe/0x10 [fcpci] > [] Wait+0x2f/0x40 [fcpci] > [] table_init+0x2c/0x3e [fcpci] > [] start+0x13/0xa5 [fcpci] > [] add_card+0xb4/0x165 [fcpci] > [] fritz_probe+0x9c/0xee [fcpci] > [] kobject_hotplug+0x2f7/0x2ff > [] pci_device_probe_static+0x2a/0x3d > [] __pci_device_probe+0x1b/0x2c > [] pci_device_probe+0x1b/0x2d > [] driver_probe_device+0x30/0x4d > [] driver_attach+0x37/0x66 > [] bus_add_driver+0x7a/0xa4 > [] driver_register+0x51/0x58 > [] fritz_init+0xb2/0xd3 [fcpci] > [] pci_register_driver+0x8b/0x9e > [] fritz_init+0xbf/0xd3 [fcpci] > [] sys_init_module+0x1c4/0x294 > [] syscall_call+0x7/0xb > Code: 10 c3 e0 ff 50 58 c9 c3 55 89 e5 5d c3 8d 74 26 00 8d bc 27 00 00 00 > 00 55 89 e5 8b 45 10 57 89 c1 56 c1 e9 02 8b 75 0c 8b 7d 08 a5 a8 02 > 74 02 66 a5 a8 01 74 01 a4 5e 5f 8b 45 08 5d c3 89 > > Does anyone have any suggestions? > Quick shot: SMP, HT? IRQ? Try other slot. Do you modprobe/insmod the module by hand or via ? -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] AVM Fritz crash
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to work with Asterisk on a Fedora Core 3 box. I've grabbed the official AVM Fritz CAPI driver from the AVM website and compiled against the current kernel. However, as soon as I modprobe it I get: CAPI Subsystem Rev 1.1.2.8 fcpci: module license 'Proprietary' taints kernel. fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2 fcpci: (fcpci built on Jan 24 2005 at 13:51:46) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt :00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 fcpci: AVM FRITZ!Card PCI found: port 0x1c00, irq 11 fcpci: Loading... fcpci: Driver 'fcpci' attached to stack. (152) Unable to handle kernel paging request at virtual address ff00 printing eip: e0bbe503 *pde = 2067 Oops: [#1] Modules linked in: fcpci(U) kernelcapi nfsd exportfs lockd parport_pc lp parport md5 ipv6 autofs4 sunrpc video button battery ac ohci_hcd i2c_amd756 i2c_core crc_ccitt isdn slhc r8169 3c59x floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod CPU:0 EIP:0060:[]Tainted: P VLI EFLAGS: 00010217 (2.6.10-1.741_FC3) EIP is at memcpy+0x13/0x30 [fcpci] eax: e0bbee4f ebx: dc1a403c ecx: 382efb93 edx: e0c14e54 esi: ff00 edi: e0bbe45e ebp: dbb80e90 esp: dbb80e88 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 3995, threadinfo=dbb8 task=db4bae50) Stack: d995b884 da7224cc e0c0d389 e0bbe45e ff00 e0bbee4f 1c02 1c02 0246 0014 dc1a4004 dc1a403c dc1a4004 ffed e0c0d64c dc1a4004 e0c0c53f dc1a4058 dc1a4004 e0c0c96d dfc1b000 dfc1b000 ffed Call Trace: [] lock_init+0x3e/0x5b [fcpci] [] CA_MSEC+0xe/0x10 [fcpci] [] Wait+0x2f/0x40 [fcpci] [] table_init+0x2c/0x3e [fcpci] [] start+0x13/0xa5 [fcpci] [] add_card+0xb4/0x165 [fcpci] [] fritz_probe+0x9c/0xee [fcpci] [] kobject_hotplug+0x2f7/0x2ff [] pci_device_probe_static+0x2a/0x3d [] __pci_device_probe+0x1b/0x2c [] pci_device_probe+0x1b/0x2d [] driver_probe_device+0x30/0x4d [] driver_attach+0x37/0x66 [] bus_add_driver+0x7a/0xa4 [] driver_register+0x51/0x58 [] fritz_init+0xb2/0xd3 [fcpci] [] pci_register_driver+0x8b/0x9e [] fritz_init+0xbf/0xd3 [fcpci] [] sys_init_module+0x1c4/0x294 [] syscall_call+0x7/0xb Code: 10 c3 e0 ff 50 58 c9 c3 55 89 e5 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 8b 45 10 57 89 c1 56 c1 e9 02 8b 75 0c 8b 7d 08 a5 a8 02 74 02 66 a5 a8 01 74 01 a4 5e 5f 8b 45 08 5d c3 89 Does anyone have any suggestions? - Steve Jabber: [EMAIL PROTECTED] Web: http://www.nexusuk.org/ Servatis a periculum, servatis a maleficum - Whisper, Evanescence -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Public key available at http://www.nexusuk.org/pubkey.txt iD8DBQFB9SLq5zUOsIV3bqERApGYAKCKilFLFldoDGMk6ymp5C8nieikLACffhVu 8y1i068ds9mxwWOb7vlyBAA= =qh6H -END PGP SIGNATURE- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
