Re: [Asterisk-Users] Asterisk as Media Gateway (was: ATT CallVantage Asterisk
I am interested. I'm using Callvantage and Centillium TA. I'm also using Asterisk with a X100P Card. Eventually I want to replace this with my Linksys NSLU2. I'm having mystery power issues with my linux server. Currently I have calls from soft and ip phones going to asterisk then out to the ta fxo to fxs. Regular pots phones go to a telephone distribution panel with the Centillium bringing service to line one. I'm interested in using the MGCP hopefully to be able to use sip outside of my lan. Edwin Horton edhorton at navcorp.com wrote: I noticed that there is some interest in MGCP slave operation for Asterisk to enable it to work with the ATT Callvantage offering. I have tried the FXS/FXO connection to Asterisk and the Linksys TA with little success. Dropped calls are the biggest problem, which does not occur when the phone is directly connected to the TA. Anyway, I am very interested in working on this project if others are still interested. Ed Horton ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk as Media Gateway (was: ATT CallVantage Asterisk)
I noticed that there is some interest in MGCP slave operation for Asterisk to enable it to work with the ATT Callvantage offering. I have tried the FXS/FXO connection to Asterisk and the Linksys TA with little success. Dropped calls are the biggest problem, which does not occur when the phone is directly connected to the TA. Anyway, I am very interested in working on this project if others are still interested. Ed Horton ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk as Media Gateway (was: ATT CallVantage Asterisk)
Hi Philip, Unfortunately, * speaks MGCP only as the Call Agent, rather than as the Media Gateway. MGCP is a master/slave protocol, and it would take some effort to make * work as the slave. I have the same problem: Free Telecom here in Paris includes MGCP service with their DSL. You can call any fixed phone in France at no charge! Rates to mobiles and international are quite aggressive, too. Various ISPs around the world have similar offers, so I'm surprised that nobody has yet implemented a solution for *. In the short term, you could connect the FXS ports on the D-Link to some FXO interfaces (PCI, TDM, SIP, H.323, or even MGCP). Of course, this impairs voice quality, increases delay, may disrupt some functions, is a hassle to administer, etc. But it's better than nothing. I am considering adding MG capability to the * MGCP stack. Do you or does anyone have an interest in helping with this? --Stewart Date: Fri, 18 Jun 2004 10:30:15 -0400 From: Kubat, Philip [EMAIL PROTECTED] Subject: [Asterisk-Users] ATT CallVantage Asterisk I am trying to connect directly to ATT VoIP service CallVanage. I have ATT's ATA (D-Link DVG-1120M). They use mgcp. I have traces of the connects from the Dlink and hoping to setup Asterisk the same. It looks like I need to have Asterisk be a MGCP endpoint (gateway). How do I configure this? Does the mgcp.conf support register like sip etc? What is the syntax? ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
