Re: [Asterisk-Users] Billing: amaflags and accountcode
The way I do it is to make a list of internal extensions and set those to no charge. They get billed at no charge that way and it works fine. /Plug Starts/ This is done using ASTPP www.aleph-com.net/astpp/ /Plug Ends/ Darren Wiebe [EMAIL PROTECTED] Chris Bagnall wrote: Hi all, I have about 10 SIP phones for different users defined in sip.conf, each with their own accountcode= entry. There is a global setting in sip.conf that states amaflags=documentation There are 3 IAX->PSTN gateways defined in iax.conf for outbound calls. These do not have an accountcode=, but do have amaflags=billing defined in each. The theory was that all calls should be logged, those calls either incoming or between SIP users should have amaflags=documentation (which they do, all well and good), but when a user makes an outgoing call via an IAX gateway, it gets amaflags=billing (so I know it's a chargeable call). However, this doesn't seem to work - all call logs, even those to the IAX gateways all have amaflags=documentation. Is there another way around this? How are you good people using amaflags and accountcode to apportion billing to different users, whilst not "billing" them for incoming calls or calls between SIP users? Thanks in advance. Regards, Chris ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Billing: amaflags and accountcode
Hi all, I have about 10 SIP phones for different users defined in sip.conf, each with their own accountcode= entry. There is a global setting in sip.conf that states amaflags=documentation There are 3 IAX->PSTN gateways defined in iax.conf for outbound calls. These do not have an accountcode=, but do have amaflags=billing defined in each. The theory was that all calls should be logged, those calls either incoming or between SIP users should have amaflags=documentation (which they do, all well and good), but when a user makes an outgoing call via an IAX gateway, it gets amaflags=billing (so I know it's a chargeable call). However, this doesn't seem to work - all call logs, even those to the IAX gateways all have amaflags=documentation. Is there another way around this? How are you good people using amaflags and accountcode to apportion billing to different users, whilst not "billing" them for incoming calls or calls between SIP users? Thanks in advance. Regards, Chris -- C.M. Bagnall, Director, Minotaur I.T. Limited This email is made from 100% recycled electrons ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
