[Asterisk-Users] Callgroup, Pickupgroup and SIP
I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. -- __ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Callgroup, Pickupgroup and SIP
I think *8# is only in the Zap channel driver. There was talk on the list recently (past day or two) about moving these hard coded codes (like *70 for call waiting, *67 to block caller ID etc) out of the Zap channel driver and in to the dialplan so they could be used on SIP and provide some commonality. I don't think you can do call pickup on SIP although the group may prove me wrong... ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
OK you are correct.. *8 picks up the call..I wonder why *8# does not work?? I also had the same problem that the phone that I collected the call from did not stop ringing.. I have problems with this as well ( similar config ). My CVS is 10 days old. I can get the call picked up with *8 ( *8# does not work ) but the phone B never stops ringing. B rings forever. I'm using SNOM200. --Pertti WipeOut . wrote: I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. -- ** Nordic LANWAN Communication Oy Pertti Pikkarainen vp of engineering E-Mail: [EMAIL PROTECTED] tel: +358-9-5024100 fax: +358-9-5023840 gsm: +358-500-511467 Sinikalliontie 16 02630 Espoo FINLAND ** ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users -- __ http://www.linuxmail.org/ Now with e-mail forwarding for only US$5.95/yr Powered by Outblaze ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
Hello, What configuration should I use for this (I use sip phones)? Best regards, Daniel WipeOut . a crit: OK you are correct.. *8 picks up the call..I wonder why *8# does not work?? I also had the same problem that the phone that I collected the call from did not stop ringing.. I have problems with this as well ( similar config ). My CVS is 10 days old. I can get the call picked up with *8 ( *8# does not work ) but the phone B never stops ringing. B rings forever. I'm using SNOM200. --Pertti WipeOut . wrote: I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. -- ** Nordic LANWAN Communication Oy Pertti Pikkarainen vp of engineering E-Mail: [EMAIL PROTECTED] tel: +358-9-5024100 fax: +358-9-5023840 gsm: +358-500-511467 Sinikalliontie 16 02630 Espoo FINLAND ** ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users -- Daniel ANDRE (mailto:[EMAIL PROTECTED]) IRIS Technologies - http://www.iris-tech.com Serveur kwartz - http://www.kwartz.com
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
- Original Message - From: Paul Crick [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, September 09, 2003 10:16 AM Subject: RE: [Asterisk-Users] Callgroup, Pickupgroup and SIP I think *8# is only in the Zap channel driver. There was talk on the list recently (past day or two) about moving these hard coded codes (like *70 for call waiting, *67 to block caller ID etc) out of the Zap channel driver and in to the dialplan so they could be used on SIP and provide some commonality. I don't think you can do call pickup on SIP although the group may prove me wrong... It would be possible to have the pickup functionality of picking up any phone who rings from another phone by dialing a special number and then the extension of that phone? ... and all of this not depended by the channel or pickup group? Thanks, Dan ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
It's exactly what I have done, I have this log message:
NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to
pick up
WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response):
Unable to determine sequence number from ''
From 276 I dial 326 and trie to pickup using 273. I include my
sip.conf
Regards,
Daniel
WipeOut . a crit:
Just add callgroup={number} and pickupgroup={number} into each SIP phone's config in the sip.conf file..
Hello,
What configuration should I use for this (I use sip phones)?
Best regards,
Daniel
WipeOut . a ?crit:
OK you are correct..
*8 picks up the call..I wonder why *8# does not work??
I also had the same problem that the phone that I collected the call from did not stop ringing..
I have problems with this as well ( similar config ). My CVS is 10 days
old.
I can get the call picked up with *8 ( *8# does not work ) but
the phone B never stops ringing.
B rings forever. I'm using SNOM200.
--Pertti
WipeOut . wrote:
I have just started to play with callgroups and pickupgroups..
I updates my * from CVS this morning (about 15 mins ago)..
I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
Have I not configured somthing correctly or is there a bug??
Later.
--
**
Nordic LANWAN Communication Oy
Pertti Pikkarainen
vp of engineering
E-Mail: [EMAIL PROTECTED]
tel: +358-9-5024100
fax: +358-9-5023840
gsm: +358-500-511467
Sinikalliontie 16
02630 Espoo
FINLAND
**
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
;
; SIP Configuration for Asterisk
;
[general]
port = 5060 ; Port to bind to
bindaddr = 192.168.10.254 ; Address to bind to
context = SIP ; Default for incoming calls
tos=lowdelay
;tos=184
;tos=50
;rxgain=30
;txgain=30
threewaycalling=yes
allow=ALAW
disallow=GSM
disallow=ULAW
; valeurs pas defaut
;téléphone grandstream benoit.
[276]
mailbox=276
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[273] ;téléphone grandstream Antoine
mailbox=273
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[235] ; téléphone grandstream Arnaud
mailbox=235
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[338] ;téléphone grandstream Dominique
mailbox=338
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[222] ; téléphone grandstream Daniel
mailbox=326
type = friend
host = 192.168.0.2
canreinvite = yes
dtmf=inband
[326] ; téléphone grandstream Daniel
mailbox=326
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
When last did you update from the CVS??
But it curently doesn't work anyway so just hang in there and hopefully it will be fixed soon..
It's exactly what I have done, I have this log message:
NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to
pick up
WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response):
Unable to determine sequence number from ''
From 276 I dial 326 and trie to pickup using 273. I include my sip.conf
Regards,
Daniel
WipeOut . a écrit:
Just add callgroup={number} and pickupgroup={number} into each SIP phone's config in the sip.conf file..
Hello,
What configuration should I use for this (I use sip phones)?
Best regards,
Daniel
WipeOut . a ?crit:
OK you are correct..
*8 picks up the call..I wonder why *8# does not work??
I also had the same problem that the phone that I collected the call from did not stop ringing..
I have problems with this as well ( similar config ). My CVS is 10 days
old.
I can get the call picked up with *8 ( *8# does not work ) but
the phone B never stops ringing.
B rings forever. I'm using SNOM200.
--Pertti
WipeOut . wrote:
I have just started to play with callgroups and pickupgroups..
I updates my * from CVS this morning (about 15 mins ago)..
I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
Have I not configured somthing correctly or is there a bug??
Later.
--
**
Nordic LANWAN Communication Oy
Pertti Pikkarainen
vp of engineering
E-Mail: [EMAIL PROTECTED]
tel: +358-9-5024100
fax: +358-9-5023840
gsm: +358-500-511467
Sinikalliontie 16
02630 Espoo
FINLAND
**
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
;
; SIP Configuration for Asterisk
;
[general]
port = 5060 ; Port to bind to
bindaddr = 192.168.10.254 ; Address to bind to
context = SIP ; Default for incoming calls
tos=lowdelay
;tos=184
;tos=50
;rxgain=30
;txgain=30
threewaycalling=yes
allow=ALAW
disallow=GSM
disallow=ULAW
; valeurs pas defaut
;téléphone grandstream benoit.
[276]
mailbox=276
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[273] ;téléphone grandstream Antoine
mailbox=273
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[235] ; téléphone grandstream Arnaud
mailbox=235
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[338] ;téléphone grandstream Dominique
mailbox=338
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[222] ; téléphone grandstream Daniel
mailbox=326
type = friend
host = 192.168.0.2
canreinvite = yes
dtmf=inband
[326] ; téléphone grandstream Daniel
mailbox=326
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
--
__
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr
Powered by Outblaze
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
WipeOut . a crit:
When last did you update from the CVS??
It's from 2003-09-04 CVS
But it curently doesn't work anyway so just hang in there and hopefully it will be fixed soon..
It's exactly what I have done, I have this log message:
NOTICE[114696]: File chan_sip.c, Line 4870 (handle_request): Nothing to
pick up
WARNING[114696]: File chan_sip.c, Line 2220 (__transmit_response):
Unable to determine sequence number from ''
>From 276 I dial 326 and trie to pickup using 273. I include my sip.conf
Regards,
Daniel
WipeOut . a ?crit:
Just add callgroup={number} and pickupgroup={number} into each SIP phone's config in the sip.conf file..
Hello,
What configuration should I use for this (I use sip phones)?
Best regards,
Daniel
WipeOut . a ?crit:
OK you are correct..
*8 picks up the call..I wonder why *8# does not work??
I also had the same problem that the phone that I collected the call from did not stop ringing..
I have problems with this as well ( similar config ). My CVS is 10 days
old.
I can get the call picked up with *8 ( *8# does not work ) but
the phone B never stops ringing.
B rings forever. I'm using SNOM200.
--Pertti
WipeOut . wrote:
I have just started to play with callgroups and pickupgroups..
I updates my * from CVS this morning (about 15 mins ago)..
I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf..
I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB..
Have I not configured somthing correctly or is there a bug??
Later.
--
**
Nordic LANWAN Communication Oy
Pertti Pikkarainen
vp of engineering
E-Mail: [EMAIL PROTECTED]
tel: +358-9-5024100
fax: +358-9-5023840
gsm: +358-500-511467
Sinikalliontie 16
02630 Espoo
FINLAND
**
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
;
; SIP Configuration for Asterisk
;
[general]
port = 5060 ; Port to bind to
bindaddr = 192.168.10.254 ; Address to bind to
context = SIP ; Default for incoming calls
tos=lowdelay
;tos=184
;tos=50
;rxgain=30
;txgain=30
threewaycalling=yes
allow=ALAW
disallow=GSM
disallow=ULAW
; valeurs pas defaut
;t?l?phone grandstream benoit.
[276]
mailbox=276
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[273] ;t?l?phone grandstream Antoine
mailbox=273
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[235] ; t?l?phone grandstream Arnaud
mailbox=235
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[338] ;t?l?phone grandstream Dominique
mailbox=338
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
[222] ; t?l?phone grandstream Daniel
mailbox=326
type = friend
host = 192.168.0.2
canreinvite = yes
dtmf=inband
[326] ; t?l?phone grandstream Daniel
mailbox=326
type = friend
host = dynamic
canreinvite = yes
dtmf=inband
pickupgroup=1
callgroup=1
--
Daniel ANDRE (mailto:[EMAIL PROTECTED])
IRIS Technologies - http://www.iris-tech.com
Serveur kwartz - http://www.kwartz.com
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
I have the same problem with Cisco 7960s. I have found however that if you do the *8 from a Zap channel, then the called phone stops ringing. But if I do *8 from a SIP device, the called phone continues to ring and ring for at least a minute. I think Mark is working on fixing this (or at least was looking at it yesterday evening). Jared On Tue, 2003-09-09 at 02:07, Pertti Pikkarainen wrote: I have problems with this as well ( similar config ). My CVS is 10 days old. I can get the call picked up with *8 ( *8# does not work ) but the phone B never stops ringing. B rings forever. I'm using SNOM200. --Pertti WipeOut . wrote: I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
Know bug http://bugs.digium.com/bug_view_page.php?bug_id=116 Pertti Pikkarainen wrote: I have problems with this as well ( similar config ). My CVS is 10 days old. I can get the call picked up with *8 ( *8# does not work ) but the phone B never stops ringing. B rings forever. I'm using SNOM200. --Pertti WipeOut . wrote: I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Callgroup, Pickupgroup and SIP
know bug http://bugs.digium.com/bug_view_page.php?bug_id=116 WipeOut . wrote: I have just started to play with callgroups and pickupgroups.. I updates my * from CVS this morning (about 15 mins ago).. I have placed callgroup=1 and pickupgroup=1 into each of my 3 phone configurations in sip.conf.. I place a call from phoneA to phoneB, then I go to phoneC and dial *8# , the call does not get picked up by phoneC and continues to ring on phoneB.. Have I not configured somthing correctly or is there a bug?? Later. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
