[Asterisk-Users] Calls not going through
When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Calls not going through
I had a similar problem, basically asterisk would be sending dialled digits before the telco was ready to pick them up, in my case some numbers would work but most wouldn't and i'd get messages from the telco like you described, the solution I'm using: put a delay before dialing the number: from my extensions.conf: PAUSE=w [trunklocal] exten = _NXX,1,Dial(${TRUNK}/${PAUSE}${EXTEN},${TIMEOUT},W) exten = _NXX,2,Congestion similar for the long distance and international calls basically dial a w before sending the actual number. HTH On Thu, 2006-02-23 at 07:33 -0700, [EMAIL PROTECTED] wrote: When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Best regards, Duane Pudenz Network Infrastructure Manager Shasta Industries ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Regards, Gerard Saraber Network Admin, Rarcoa, Inc. (630) 654-2580 x11 [EMAIL PROTECTED] ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Calls not going through
When a call is placed out the Zap interface there is a long pause followed by an error message from the telco that the call can not be placed as dialed. We have a tdm2413e with 11 1FB (POTS) lines. The number being dialed is a working local number, all dialed numbers get the same error. What should we be looking for ? Asterisk is probably dialing to quickly and the CO is yet ready to receive dtmf digits. Rather common problem. Insert a w in your dial string just before the $EXTN (or whatever you're using for a string). The w is not really documented in the 'show application dial', but it does insert a delay of about 250 milliseconds. If that doesn't work, then try multiple w's (as in www). ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users