[Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
Hi,
Let me explain a little about our system here first.
We have a Digium TE110P card hooked up to an isdn 30 line. (Australia
EuroISDN) This works fine.
We also have a Digium TDM400P with 2 FXS modules installed.
(The green modules)
The /etc/zaptel.conf file has nothing but the following in
it.
-=-=-=-
span=1,1,1,ccs,hdb3,crc4
dchan=16
bchan=1-15,17-31
defaultzone=au
loadzone=au
##tdm card
fxoks=33-34
-=-=-=-
The /etc/asterisk/zapata.conf has been stripped down to
include only the following.
-=-=-=-
[trunkgroups]
[channels]
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=yes
faxdetect=both
jitterbuffers=24
signalling=pri_cpe
switchtype=euroisdn
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=default
channel = 1-15,17-31 ; Set this to 1-15,17-31 for E1
signalling=fxs_ks
context=uniware_sendfax
channel =33-34
-=-=-=-
What we want to be able to do is plug a standard telephone
into an fxs port on the tdm card, and have it get a line from the E1 when the handset
is picked up.
The problem is that when the handset is picked up, the phone
automatically gets picked up by asterisk as an incoming call, and the call is managed
by the incoming call part of the extensions.conf.
IE: the part of the extensions.conf with the following line.
Exten = s,1,MakeReceptionPhoneRing.
This is fantastic if I needed an instant dial to chat with
our receptionist.
What I was expecting was that it would go to the part in the
extensions.conf where it detects the numbers dialed.
Ie:
exten = _NXXX,1,Dial(Zap/g1/${EXTEN}|20,t)
Thus allowing us to dial a number and have asterisk direct
it to the appropriate outgoing line.
I could possibly be going about this completely the wrong
way. Ideally I would have thought that a bridge between cards was possible
outside of asterisk.
Any ideas or thoughts on this would be appreciated.
--Dennis
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
WaitExten perhaps?
Paul Hales
Technical Manager
AsteriskIT
Dennis [EMAIL PROTECTED] wrote:
Hi,
Let me explain a little about our system here first.
We have a Digium TE110P card hooked up to an isdn 30 line. (Australia -
EuroISDN) This works fine.
We also have a Digium TDM400P with 2 FXS modules installed. (The green
modules)
The /etc/zaptel.conf file has nothing but the following in it.
-=-=-=-
span=1,1,1,ccs,hdb3,crc4
dchan=16
bchan=1-15,17-31
defaultzone=au
loadzone=au
##tdm card
fxoks=33-34
-=-=-=-
The /etc/asterisk/zapata.conf has been stripped down to include only the
following.
-=-=-=-
[trunkgroups]
[channels]
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=yes
faxdetect=both
jitterbuffers=24
signalling=pri_cpe
switchtype=euroisdn
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=default
channel = 1-15,17-31 ; Set this to 1-15,17-31 for E1
signalling=fxs_ks
context=uniware_sendfax
channel =33-34
-=-=-=-
What we want to be able to do is plug a standard telephone into an fxs port
on the tdm card, and have it get a line from the E1 when the handset is
picked up.
The problem is that when the handset is picked up, the phone automatically
gets picked up by asterisk as an incoming call, and the call is managed by
the incoming call part of the extensions.conf.
IE: the part of the extensions.conf with the following line.
Exten = s,1,MakeReceptionPhoneRing.
This is fantastic if I needed an instant dial to chat with our receptionist.
What I was expecting was that it would go to the part in the extensions.conf
where it detects the numbers dialed.
Ie:
exten = _NXXX,1,Dial(Zap/g1/${EXTEN}|20,t)
Thus allowing us to dial a number and have asterisk direct it to the
appropriate outgoing line.
I could possibly be going about this completely the wrong way. Ideally I
would have thought that a bridge between cards was possible outside of
asterisk.
Any ideas or thoughts on this would be appreciated.
--Dennis
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
Hi Dennis,
You need to add immediate=no before your channel assignment; asterisk
will then give you a dialtone when you pick up the handset. Also the
context uniware_sendfax must have the pattern match and associated zap
dial that you need.
HTH.
Cheers,
Paul
www.austechpartnerships.com
t) +61 (0)3 9221 0888
SIP) [EMAIL PROTECTED]
IAX) [EMAIL PROTECTED]
IAXtel) 1700-482-8273
ATP Centrex)
Dennis wrote:
signalling=fxs_ks
context=uniware_sendfax
channel =33-34
-=-=-=-
What we want to be able to do is plug a standard telephone into an fxs
port on the tdm card, and have it get a line from the E1 when the
handset is picked up.
exten = _NXXX,1,Dial(Zap/g1/${EXTEN}|20,t)
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
Hi,
Thanks for that Paul, it has solved that problem at least.
In doing so however it broke the incoming calls on the other card.
To fix this we need both immediate=yes set before the TE110P channels, and
then immediate=no after that but before the TDM channel assignment.
It all works for now, but is this how the configuration for these files is
meant to be?
Either way, thanks for your help. This has had me completely confused for
several days now.
Regards,
Dennis Corp
Uniware Pty Ltd.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Liew
Sent: Friday, 31 March 2006 12:08 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
Hi Dennis,
You need to add immediate=no before your channel assignment; asterisk
will then give you a dialtone when you pick up the handset. Also the
context uniware_sendfax must have the pattern match and associated zap
dial that you need.
HTH.
Cheers,
Paul
www.austechpartnerships.com
t) +61 (0)3 9221 0888
SIP) [EMAIL PROTECTED]
IAX) [EMAIL PROTECTED]
IAXtel) 1700-482-8273
ATP Centrex)
Dennis wrote:
signalling=fxs_ks
context=uniware_sendfax
channel =33-34
-=-=-=-
What we want to be able to do is plug a standard telephone into an fxs
port on the tdm card, and have it get a line from the E1 when the
handset is picked up.
exten = _NXXX,1,Dial(Zap/g1/${EXTEN}|20,t)
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Config TE110P and TDM400 with 2 FXS modules
Hi Dennis, Yes, you've got it correct. Glad its working for you. Cheers, Paul www.austechpartnerships.com t) +61 (0)3 9221 0888 SIP) [EMAIL PROTECTED] IAX) [EMAIL PROTECTED] IAXtel) 1700-482-8273 ATP Centrex) Dennis wrote: Hi, Thanks for that Paul, it has solved that problem at least. In doing so however it broke the incoming calls on the other card. To fix this we need both immediate=yes set before the TE110P channels, and then immediate=no after that but before the TDM channel assignment. It all works for now, but is this how the configuration for these files is meant to be? ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
