re: setting zaptel to UK mode Yes, I've set the tonezone, and also when loading the module have set it to OPERMODE=UK Looks like that is working
A few ideas: *Maybe* the opermode code in the zaptel drivers isn't actually working ? Meaning, maybe it's saying it's in UK mode but actually isn't? Is there any way to know really? Another question: Is it possible to run the CVS-HEAD/Stable version of Zaptel (1.2 whatever) with an older version of Asterisk? I'm running 1.09, but I was wondering if I could get at the newer echo cancellers like KB1 and MG2 without upgrading to Asterisk 1.2? Thanks for your suggestions everyone Chris ----- Original Message ----- From: "Tzafrir Cohen" <[EMAIL PROTECTED]> To: "Chris Earle (CBL)" <[EMAIL PROTECTED]> Sent: Thursday, January 19, 2006 1:02 PM Subject: Re: [Asterisk-Users] Re: Connection TDM400P to UK PSTN > On Thu, Jan 19, 2006 at 11:30:25AM -0500, Chris Earle (CBL) wrote: > > Okay, sorry to hash out this discussion again, but it's starting to drive me > > crazy > > > > Successfully got the adapters to allow the BT phones to ring on lines coming > > out of a TDM.......... but now my latest problem is echo. > > > > I have done tweaking of the gains in North and South America, and after a > > bit of work have gotten echo to go away, but this seems to just not want to > > go away. > > > > On an incoming call from the POTS, everything on my end sounds perfect, > > but on the internal extension phone, there is an echo when you speak. An > > almost perfect copy of what you say. If I turn down the gains on that > > channel, it doesn't seem to do much, or causes other volume issues. > > > > Help! > > > > In my research and hunting, I am starting to worry that the US-bought digium > > cards have IMPEDENCE issues in the UK with the BT Lines etc? That would > > seem to explain why the echo is so incessant. I have even tried changing > > Echo Cancellers to MARK3. > > > > Right, this is Asterisk 1.0.9, Zaptel 1.0.9.2 on Debian > > > > Suggestions / Experiences in UK appreciated > > Not sure, but if the card is recent, then its impedence values and such > should be configurable. > > For starters, set the tonoezone (both of them) to "uk" in zaptel.conf > and re-run ztcfg . > > Try to see what exactly is the model of your card and your firmware. I'm > not sure how to check this. Maybe ask Digium support. > > -- > Tzafrir Cohen | [EMAIL PROTECTED] | VIM is -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users