Re: [Asterisk-Users] Double DTMF with tdm card
Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
Did you try relaxdtmf=no Walt Reed wrote: Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
Note this is on external calls to external applications Not Asterisk DTMF detection. It's as though DTMF is distorted when going through a TDM fxs port, or that it's being caught (too late) and then retransmitted. Does * intercept outgoing dtmf? I haven't found good docs that tell exactly what relaxdtmf does. On Thu, Nov 03, 2005 at 08:01:03AM -0600, Eric ManxPower Wieling said: Did you try relaxdtmf=no Walt Reed wrote: Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
Walt Reed wrote: Note this is on external calls to external applications Not Asterisk DTMF detection. It's as though DTMF is distorted when going through a TDM fxs port, or that it's being caught (too late) and then retransmitted. Does * intercept outgoing dtmf? For outgoing DTMF play around with your txgain and rxgain. I suspect your outbound DTMF is either too loud or too soft. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
My problem is slightly different as there is 2 T1 Ports involved - With a T1 test set I can clearly hear two tones sent quickly with each outside caller press. I assume one of the tones is the actual audio passing thru the connection and the other generated by the T1 card itself.If I make the same test with a TDM400 as input connection and the TE410P port as output connection, there is no double dialing. Same results if an inside extension is used as input connection. It only happens if it's a T1 to T1 Bridge... If it is a regenerated tone from the TE410, it seems there should be some option to stop listening for tone touch after connection has been established? Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: Eric ManxPower Wieling [EMAIL PROTECTED] Cc: Walt Reed [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Thursday, November 03, 2005 6:50 AM Subject: Re: [Asterisk-Users] Double DTMF with tdm card Note this is on external calls to external applications Not Asterisk DTMF detection. It's as though DTMF is distorted when going through a TDM fxs port, or that it's being caught (too late) and then retransmitted. Does * intercept outgoing dtmf? I haven't found good docs that tell exactly what relaxdtmf does. On Thu, Nov 03, 2005 at 08:01:03AM -0600, Eric ManxPower Wieling said: Did you try relaxdtmf=no Walt Reed wrote: Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
Frankly, I think this may be happening to me too. It's still a zap to zap channel problem. On Thu, Nov 03, 2005 at 08:27:59AM -0800, Bart Fisher said: My problem is slightly different as there is 2 T1 Ports involved - With a T1 test set I can clearly hear two tones sent quickly with each outside caller press. I assume one of the tones is the actual audio passing thru the connection and the other generated by the T1 card itself.If I make the same test with a TDM400 as input connection and the TE410P port as output connection, there is no double dialing. Same results if an inside extension is used as input connection. It only happens if it's a T1 to T1 Bridge... If it is a regenerated tone from the TE410, it seems there should be some option to stop listening for tone touch after connection has been established? Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: Eric ManxPower Wieling [EMAIL PROTECTED] Cc: Walt Reed [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Thursday, November 03, 2005 6:50 AM Subject: Re: [Asterisk-Users] Double DTMF with tdm card Note this is on external calls to external applications Not Asterisk DTMF detection. It's as though DTMF is distorted when going through a TDM fxs port, or that it's being caught (too late) and then retransmitted. Does * intercept outgoing dtmf? I haven't found good docs that tell exactly what relaxdtmf does. On Thu, Nov 03, 2005 at 08:01:03AM -0600, Eric ManxPower Wieling said: Did you try relaxdtmf=no Walt Reed wrote: Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Double DTMF with tdm card
OK, then... I posted on the Bugs Web Site and markster said: This is a technical support issue. Please pursue through Digium tech support ([EMAIL PROTECTED]) and contact me if you have any issues., Hmmm... So I have written support - still waiting for answer - If I hear anything I'll let you know Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: Bart Fisher [EMAIL PROTECTED] Cc: Walt Reed [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Thursday, November 03, 2005 9:57 AM Subject: Re: [Asterisk-Users] Double DTMF with tdm card Frankly, I think this may be happening to me too. It's still a zap to zap channel problem. On Thu, Nov 03, 2005 at 08:27:59AM -0800, Bart Fisher said: My problem is slightly different as there is 2 T1 Ports involved - With a T1 test set I can clearly hear two tones sent quickly with each outside caller press. I assume one of the tones is the actual audio passing thru the connection and the other generated by the T1 card itself.If I make the same test with a TDM400 as input connection and the TE410P port as output connection, there is no double dialing. Same results if an inside extension is used as input connection. It only happens if it's a T1 to T1 Bridge... If it is a regenerated tone from the TE410, it seems there should be some option to stop listening for tone touch after connection has been established? Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: Eric ManxPower Wieling [EMAIL PROTECTED] Cc: Walt Reed [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Thursday, November 03, 2005 6:50 AM Subject: Re: [Asterisk-Users] Double DTMF with tdm card Note this is on external calls to external applications Not Asterisk DTMF detection. It's as though DTMF is distorted when going through a TDM fxs port, or that it's being caught (too late) and then retransmitted. Does * intercept outgoing dtmf? I haven't found good docs that tell exactly what relaxdtmf does. On Thu, Nov 03, 2005 at 08:01:03AM -0600, Eric ManxPower Wieling said: Did you try relaxdtmf=no Walt Reed wrote: Nope - I saw your posts on it though. Very frustrating. I've had to discontinue use of my TDM FXS ports until some solution is found. On Wed, Nov 02, 2005 at 10:18:47AM -0800, Bart Fisher said: Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http
Re: [Asterisk-Users] Double DTMF with tdm card
Did you ever find a solution for this problem? I have it on latest Beta 2 Bart - Original Message - From: Walt Reed [EMAIL PROTECTED] To: asterisk-users@lists.digium.com Sent: Friday, October 21, 2005 7:26 AM Subject: [Asterisk-Users] Double DTMF with tdm card I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Double DTMF with tdm card
I have a TDM22B (latest rev), Sipura 2000, and Cisco ATA 186. Running CVS HEAD from about a week ago. Calls made from a SIP device on either the cisco or sipura work fine. Call made from an analog phone hooked up to one of the FXS ports on the TDM22B sound fine, but any DTMF entered after the call is bridged to an outside number (like entering a PIN for a bank or external conference bridge) is frequently doubled. Entering 1234 may be recognized as 112344 for example. I ran fxotune, and played with the rx and tx gains a little, but have been unable to resolve the problem... * has no problem dialing outside numbers. It's just DTMf after the call is bridged between zap channels... Any ideas? ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
