Re: [Asterisk-Users] E100P - connected to Cisco
try: span=2,1,0,ccs,hdb3,yellow matteo Il lun, 2004-01-12 alle 16:13, Daniel Bichara ha scritto: Hi, have any one sucessfully connected E100P to Cisco? I am getting singnalling problems (channels becomes up and down)... # Zaptel.Conf: span=2,0,0,ccs,hdb3,yellow bchan=32-46,48-62 dchan=47 # Zapata.conf: callwaiting=yes callwaitingcallerid=yes threewaycalling=no transfer=no cancallforward=no callreturn=no echocancel=yes echocancelwhenbridged=yes group = 2 signalling = pri_net switchtype = national channel = 32-46 channel = 48-62 # My New Cisco Conf: ! Cisco AS5300 - ios c5300-is-mz.122-5.bin isdn switch-type primary-ni isdn voice-call-failure 0 controller E1 3 framing NO-CRC4 pri-group timeslots 1-31 interface Serial3:15 no ip address isdn switch-type primary-ni isdn protocol-emulate network isdn guard-timer 2000 isdn T203 1 isdn T306 3000 isdn T310 6 isdn bchan-number-order ascending no cdp enable My INTENSE debug output: [ [00 [00 01 [00 01 01 [00 01 01 01 [00 01 01 01 ] [00 01 01 01 ] Supervisory frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000EA: 1 Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 000 P/F: 1 0 bytes of data -- Restarting T203 counter [ [00 [00 01 [00 01 00 [00 01 00 00 [00 01 00 00 08 [00 01 00 00 08 02 [00 01 00 00 08 02 00 [00 01 00 00 08 02 00 00 [00 01 00 00 08 02 00 00 46 [00 01 00 00 08 02 00 00 46 18 [00 01 00 00 08 02 00 00 46 18 03 [00 01 00 00 08 02 00 00 46 18 03 a9 [00 01 00 00 08 02 00 00 46 18 03 a9 83 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000EA: 1 N(S): 000 0: 0 N(R): 000 P: 0 13 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 ChanSel: Reserved Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 28 ] Restart Indentifier: [ Ext: 1 Spare: 0 Resetting Indicated Channel (0) ] -- T200 counter expired, What to do... -- Retransmitting 17 bytes [ [00 [00 01 [00 01 00 [00 01 00 01 [00 01 00 01 08 [00 01 00 01 08 02 [00 01 00 01 08 02 00 [00 01 00 01 08 02 00 00 [00 01 00 01 08 02 00 00 46 [00 01 00 01 08 02 00 00 46 18 [00 01 00 01 08 02 00 00 46 18 03 [00 01 00 01 08 02 00 00 46 18 03 a9 [00 01 00 01 08 02 00 00 46 18 03 a9 83 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000EA: 1 N(S): 000 0: 0 N(R): 000 P: 1 13 bytes of data -- Rescheduling retransmission (1) [ [00 [00 01 [00 01 01 [00 01 01 03 [00 01 01 03 ] [00 01 01 03 ] Supervisory frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000EA: 1 Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 001 P/F: 1 0 bytes of data -- ACKing all packets from 0 to (but not including) 1 -- ACKing packet 0, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [ [02 [02 01 [02 01 00 [02 01 00 02 [02 01 00 02 08 [02 01 00 02 08 02 [02 01 00 02 08 02 80 [02 01 00 02 08 02 80 00 [02 01 00 02 08 02 80 00 4e [02 01 00 02 08 02 80 00 4e 18 [02 01 00 02 08 02 80 00 4e 18 03 [02 01 00 02 08 02 80 00 4e 18 03 a9 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ] [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000EA: 1 N(S): 000 0: 0 N(R): 001 P: 0 13 bytes of data -- ACKing all packets from 0 to (but not including) 1 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter Protocol Discriminator: Q.931 (8) len=13 Call
[Asterisk-Users] E100P - connected to Cisco
Hi, have any one sucessfully connected E100P to Cisco? I am getting singnalling problems (channels becomes up and down)... # Zaptel.Conf: span=2,0,0,ccs,hdb3,yellow bchan=32-46,48-62 dchan=47 # Zapata.conf: callwaiting=yes callwaitingcallerid=yes threewaycalling=no transfer=no cancallforward=no callreturn=no echocancel=yes echocancelwhenbridged=yes group = 2 signalling = pri_net switchtype = national channel = 32-46 channel = 48-62 # My New Cisco Conf: ! Cisco AS5300 - ios c5300-is-mz.122-5.bin isdn switch-type primary-ni isdn voice-call-failure 0 controller E1 3 framing NO-CRC4 pri-group timeslots 1-31 interface Serial3:15 no ip address isdn switch-type primary-ni isdn protocol-emulate network isdn guard-timer 2000 isdn T203 1 isdn T306 3000 isdn T310 6 isdn bchan-number-order ascending no cdp enable My INTENSE debug output: [ [00 [00 01 [00 01 01 [00 01 01 01 [00 01 01 01 ] [00 01 01 01 ] Supervisory frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 000 P/F: 1 0 bytes of data -- Restarting T203 counter [ [00 [00 01 [00 01 00 [00 01 00 00 [00 01 00 00 08 [00 01 00 00 08 02 [00 01 00 00 08 02 00 [00 01 00 00 08 02 00 00 [00 01 00 00 08 02 00 00 46 [00 01 00 00 08 02 00 00 46 18 [00 01 00 00 08 02 00 00 46 18 03 [00 01 00 00 08 02 00 00 46 18 03 a9 [00 01 00 00 08 02 00 00 46 18 03 a9 83 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] [00 01 00 00 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 N(S): 000 0: 0 N(R): 000 P: 0 13 bytes of data -- Restarting T203 counter Stopping T_203 timer Starting T_200 timer Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 0/0x0) (Originator) Message type: RESTART (70) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 ChanSel: Reserved Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 28 ] Restart Indentifier: [ Ext: 1 Spare: 0 Resetting Indicated Channel (0) ] -- T200 counter expired, What to do... -- Retransmitting 17 bytes [ [00 [00 01 [00 01 00 [00 01 00 01 [00 01 00 01 08 [00 01 00 01 08 02 [00 01 00 01 08 02 00 [00 01 00 01 08 02 00 00 [00 01 00 01 08 02 00 00 46 [00 01 00 01 08 02 00 00 46 18 [00 01 00 01 08 02 00 00 46 18 03 [00 01 00 01 08 02 00 00 46 18 03 a9 [00 01 00 01 08 02 00 00 46 18 03 a9 83 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] [00 01 00 01 08 02 00 00 46 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 N(S): 000 0: 0 N(R): 000 P: 1 13 bytes of data -- Rescheduling retransmission (1) [ [00 [00 01 [00 01 01 [00 01 01 03 [00 01 01 03 ] [00 01 01 03 ] Supervisory frame: SAPI: 00 C/R: 0 EA: 0 TEI: 000 EA: 1 Zero: 0 S: 0 01: 1 [ RR (receive ready) ] N(R): 001 P/F: 1 0 bytes of data -- ACKing all packets from 0 to (but not including) 1 -- ACKing packet 0, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 counter [ [02 [02 01 [02 01 00 [02 01 00 02 [02 01 00 02 08 [02 01 00 02 08 02 [02 01 00 02 08 02 80 [02 01 00 02 08 02 80 00 [02 01 00 02 08 02 80 00 4e [02 01 00 02 08 02 80 00 4e 18 [02 01 00 02 08 02 80 00 4e 18 03 [02 01 00 02 08 02 80 00 4e 18 03 a9 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ] [02 01 00 02 08 02 80 00 4e 18 03 a9 83 9c 79 01 80 ] Informational frame: SAPI: 00 C/R: 1 EA: 0 TEI: 000 EA: 1 N(S): 000 0: 0 N(R): 001 P: 0 13 bytes of data -- ACKing all packets from 0 to (but not including) 1 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter Protocol Discriminator: Q.931 (8) len=13 Call Ref: len= 2 (reference 32768/0x8000) (Terminator) Message type: RESTART ACKNOWLEDGE (78) Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0 ChanSel: Reserved Ext: 1 Coding: 0 Number Specified Channel Type: 3 Ext: 1 Channel: 28 ] Restart Indentifier: [ Ext: 1 Spare: 0 Resetting Indicated Channel (0) ] Sending Receiver Ready (1) [ [02 [02 01 [02 01 01 [02 01 01 02 [02 01 01 02 ] [02 01 01 02 ]
Re: [Asterisk-Users] E100P connected to Cisco
You need to have HDLC generic support compiled into your kernel ... I think it's not good to have it compiled in modules ... just embedded in kernel. Martin On Sat, 20 Dec 2003, Daniel Bichara wrote: Hi All, I wish to connect * to a Cisco using a E100P board. When I load the driver I got this error message: -bash-2.05b# modprobe wct1xxp ZT_CHANCONFIG failed on channel 1: Function not implemented (38) /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed Follows Cisco configuration: isdn switch-type primary-qsig isdn voice-call-failure 0 controller E1 2 framing NO-CRC4 clock source line primary pri-group timeslots 1-31 interface Serial2:15 no ip address isdn switch-type primary-qsig isdn overlap-receiving T302 2000 isdn incoming-voice modem isdn T310 4 isdn send-alerting no cdp enable voice-port 2:D cptone BR I configured my /etc/zapata.conf: span=1,0,0,ccs,hdb3 nethdlc=1-15 Any clue? Thanks in advance, Daniel ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] E100P connected to Cisco
Hi All, I wish to connect * to a Cisco using a E100P board. When I load the driver I got this error message: -bash-2.05b# modprobe wct1xxp ZT_CHANCONFIG failed on channel 1: Function not implemented (38) /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed Follows Cisco configuration: isdn switch-type primary-qsig isdn voice-call-failure 0 controller E1 2 framing NO-CRC4 clock source line primary pri-group timeslots 1-31 interface Serial2:15 no ip address isdn switch-type primary-qsig isdn overlap-receiving T302 2000 isdn incoming-voice modem isdn T310 4 isdn send-alerting no cdp enable voice-port 2:D cptone BR I configured my /etc/zapata.conf: span=1,0,0,ccs,hdb3 nethdlc=1-15 Any clue? Thanks in advance, Daniel ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
