Re: [Asterisk-Users] E100P troubles
Thanks, I use an straight through cable and works fine. Jorge - Original Message - From: "Martin Pycko" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 03, 2003 6:07 PM Subject: Re: [Asterisk-Users] E100P troubles > Maybe you need the straight through cable. > > Martin > > On Mon, 3 Nov 2003 [EMAIL PROTECTED] wrote: > > > Hi, > > > > At least I have one E1 to test my E100P. > > > > My telco company in Spain has installed one LiteSpan 1540 NT (UTR 2M) > > > > I make a crossover cable between E100P and UTR. > > > > 1 <-> 4 > > 2 <-> 5 > > > > after loading drivers red led on e100p is blinking and alarm is flashing on > > UTR. > > > > What is wrong ? > > > > my zaptel.conf inf: > > > > span=1,0,0,ccs,hdb3,crc4 > > bchan=1-15 > > dchan=16 > > bchan=17-31 > > > > best regards, > > Jorge Castellet > > [EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] E100P troubles
Maybe you need the straight through cable. Martin On Mon, 3 Nov 2003 [EMAIL PROTECTED] wrote: > Hi, > > At least I have one E1 to test my E100P. > > My telco company in Spain has installed one LiteSpan 1540 NT (UTR 2M) > > I make a crossover cable between E100P and UTR. > > 1 <-> 4 > 2 <-> 5 > > after loading drivers red led on e100p is blinking and alarm is flashing on > UTR. > > What is wrong ? > > my zaptel.conf inf: > > span=1,0,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > best regards, > Jorge Castellet > [EMAIL PROTECTED] > > > > > > - Original Message - > From: "rnc Info Lists" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 03, 2003 4:08 PM > Subject: Re: [Asterisk-Users] New IAX software phone (for WIndows platform) > > > > > Hi , > > > > > > > > > I even think to avoid using an installer mainly because the > installer > > > part is bigger that the application himself. > > > What do you think? > > > > > > > Dan, > > I agree that if an installer or registry entries are not needed then it > > makes an automated rollout much easier. Also makes it possible to run the > > program from a diskette/CD so as to be really portable between systems. > > However, the installer will be necessary for the acceptance by the > > "non-geeks". > > > > I only had a short time to run your program last night but it worked well. > > Configuration was easy and it worked the first time! The problem with > > changing address book entries was encountered but that has already been > > reported. Will do more extensive testing tonight with the version from > > today. Thanks for a good program. Looking forward to it being GPL and > > the further development. > > > > Robert > > Germany > > ___ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] E100P troubles
Hi, At least I have one E1 to test my E100P. My telco company in Spain has installed one LiteSpan 1540 NT (UTR 2M) I make a crossover cable between E100P and UTR. 1 <-> 4 2 <-> 5 after loading drivers red led on e100p is blinking and alarm is flashing on UTR. What is wrong ? my zaptel.conf inf: span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 best regards, Jorge Castellet [EMAIL PROTECTED] - Original Message - From: "rnc Info Lists" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 03, 2003 4:08 PM Subject: Re: [Asterisk-Users] New IAX software phone (for WIndows platform) > > Hi , > > > > > > I even think to avoid using an installer mainly because the installer > > part is bigger that the application himself. > > What do you think? > > > > Dan, > I agree that if an installer or registry entries are not needed then it > makes an automated rollout much easier. Also makes it possible to run the > program from a diskette/CD so as to be really portable between systems. > However, the installer will be necessary for the acceptance by the > "non-geeks". > > I only had a short time to run your program last night but it worked well. > Configuration was easy and it worked the first time! The problem with > changing address book entries was encountered but that has already been > reported. Will do more extensive testing tonight with the version from > today. Thanks for a good program. Looking forward to it being GPL and > the further development. > > Robert > Germany > ___ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users