Re: [Asterisk-Users] HFC-5/S + Asterisk
On Wed, Feb 02, 2005 at 08:06:35AM +0100, Peer Oliver Schmidt wrote: Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? Timing is done either by Hardware (Digium cards), zaprtc (a rewrite from junghanns for the kernel-rtc module), via rtai (new in bristuff RC5) or via uhci usb (ztdummy). HFC cards do not have timing hardware, so you need something else. -- Best regards Peer Oliver Schmidt ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
Am Mittwoch, den 02.02.2005, 10:41 +0100 schrieb Thomas Niesel: On Wed, Feb 02, 2005 at 08:06:35AM +0100, Peer Oliver Schmidt wrote: Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? Timing is done either by Hardware (Digium cards), zaprtc (a rewrite from junghanns for the kernel-rtc module), via rtai (new in bristuff RC5) or via uhci usb (ztdummy). HFC cards do not have timing hardware, so you need something else. HFC cards do have a timing source. If you run zaphfc you dont need any other zaptel timing source. best regards Klaus ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
On Wed, Feb 02, 2005 at 10:49:26AM +0100, Klaus-Peter Junghanns wrote: Am Mittwoch, den 02.02.2005, 10:41 +0100 schrieb Thomas Niesel: On Wed, Feb 02, 2005 at 08:06:35AM +0100, Peer Oliver Schmidt wrote: Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? Timing is done either by Hardware (Digium cards), zaprtc (a rewrite from junghanns for the kernel-rtc module), via rtai (new in bristuff RC5) or via uhci usb (ztdummy). HFC cards do not have timing hardware, so you need something else. HFC cards do have a timing source. If you run zaphfc you dont need any other zaptel timing source. Hm, I think I missed something. But it's true, on my zaphfc system I dont have any errors/probs on timing. On my capi system I had probs until the use of zaprtc. Sight, too many boxes...:) Sorry Peer, wrong thinking. best regards Klaus ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] HFC-5/S + Asterisk
Hi Guys, I got 2 internal HFC-S[5] (not sure what character this is) internal modem cards yesterday, thought I would get different makes as the one was a named brand, the other not... but anyway... Its picked up by lscpi as a ... Network Controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) I'm using kernel 2.6.10, and I saw I must use CAPI. I compiled this along with the latest mISDN CVS + chan_capi... all went good. I loaded the modules after a reboot, no problem, it detected the controller and I got a message kapi: card 1 mISDN ready., I loaded all the mISDN modules. I then copied over the default mISDN configuration file for asterisk, and fired up asterisk. My problem comes in now, I am in South Africa and have plugged the modem into the first B-Channel on my Telecom's unit, where my very basic little hardware PBX was plugged in. When I fire up asterisk it picks up the CAPI device, lists its capabilities ... etc. When I type capi info it lists 2 B-Channels are available. Cool I continued to dialin... *wait* *wait* *wait* asterisk didn't budge :-(, no incomming call despite the ringing sound on the line I dialed with, no debug messages (even after I added like 1,000 to the chan_capi module) ... nothing. Any ideas, hints... places to look? Thanks guys... -Nigel signature.asc Description: OpenPGP digital signature ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
On Tue, Feb 01, 2005 at 06:13:41PM +, Nigel Kukard wrote: Hi Guys, I got 2 internal HFC-S[5] (not sure what character this is) internal modem cards yesterday, thought I would get different makes as the one was a named brand, the other not... but anyway... Its picked up by lscpi as a ... Network Controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Ah, thats ok I'm using kernel 2.6.10, and I saw I must use CAPI. I compiled this along with the latest mISDN CVS + chan_capi... all went good. Oops, capi with misdn and hfc-based card? Sounds like a mix like QNX with windoom and MAC stuff :) I loaded the modules after a reboot, no problem, it detected the controller and I got a message kapi: card 1 mISDN ready., I loaded all the mISDN modules. Jepp, a mix! I then copied over the default mISDN configuration file for asterisk, and fired up asterisk. My problem comes in now, I am in South Africa and have plugged the modem into the first B-Channel on my Telecom's unit, where my very basic little hardware PBX was plugged in. When I fire up asterisk it picks up the CAPI device, lists its capabilities ... etc. When I type capi info it lists 2 B-Channels are available. Hm, strange! Cool I continued to dialin... *wait* *wait* *wait* asterisk didn't budge :-(, no incomming call despite the ringing sound on the line I dialed with, no debug messages (even after I added like 1,000 to the chan_capi module) ... nothing. Any ideas, hints... places to look? Shure: 1.st the wiki 2.nd make shure you got the right driver for your card 3.rd read the docs for that driver = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. -- Tho/\/\as ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] HFC-5/S + Asterisk
Thomas Niesel wrote: [..] = Your Card should work with i4l (bad) and zaphfc from junghanns (good) Forget about Capi and mISDN, go for kernel 2.6.10 along with zaphfc, ztdummy together with uhci for timing and ask the wiki for more details. Pardon my ignorance, but isn't one of the reasons for zaphfc to provide a ZAP timing source? So, if you have zaphfc card together with the bristuff from http://www.junghanns.net you don't need ztdummy, do you? -- Best regards Peer Oliver Schmidt ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users