Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Daiku wrote: Since i have access to a Windows machine at work, i'll try that route as well... If you don't wanna install cygwin you can download iaxyprov compiled with Cygwin from: ftp://ftp.planetarium.com.br/pub/util/voip/iaxyprov/ Bye, Leonardo -- Leonardo Gomes Figueira [EMAIL PROTECTED] ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Quoting from message: 05/01/18 20:24 +0900 sent by Leonardo Gomes Figueira: If you don't wanna install cygwin you can download iaxyprov compiled with Cygwin from: ftp://ftp.planetarium.com.br/pub/util/voip/iaxyprov/ Hi, and thanks for the hint...! A few days ago another helpful list subscriber sent me a small utility that he compiled and tested himself, but since that day i have not been at the place yet where i can use the Windows machine. Sometime this week or next week... I'll report the results here when all is done. Thanks regards: H. D. -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Hi. Due to the lack of any instructions from Digium, I have bought this IAXy but have been completely unable to use it at all. Now that I've tried provisioning my IAXy using the software given below. I get the message Got response back from 192.168.0.3. Does this mean that it has been successfully provisioned? But when I pick up my phone, there is still no dial tone. What am I still missing??? How do I know if my IAXy has been properly provisioned? Thanks!! Daiku wrote on 2005/01/18 20:59: Quoting from message: 05/01/18 20:24 +0900 sent by Leonardo Gomes Figueira: If you don't wanna install cygwin you can download iaxyprov compiled with Cygwin from: ftp://ftp.planetarium.com.br/pub/util/voip/iaxyprov/ Hi, and thanks for the hint...! A few days ago another helpful list subscriber sent me a small utility that he compiled and tested himself, but since that day i have not been at the place yet where i can use the Windows machine. Sometime this week or next week... I'll report the results here when all is done. Thanks regards: H. D. -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
I've actually given up on my two IAXy devices - one of them keeps loosing it's connection and needs to be rebooted, the otherone keeps its connection but periodically loses it's ability to send clear audio and needs to be rebooted. I'm going back to the Grandstream ATAs that work just dandily for me, and are cheaper, to boot. IMHO the IAXy is not yet ready for production use. They're going to go into a box and sit there until a firmware update fixes the problems or until someone braver than me offers to buy them off of me for a cut rate :) regards, Paul - Original Message - From: blackburn [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Tuesday, January 18, 2005 7:38 AM Subject: Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert) Hi. Due to the lack of any instructions from Digium, I have bought this IAXy but have been completely unable to use it at all. Now that I've tried provisioning my IAXy using the software given below. I get the message Got response back from 192.168.0.3. Does this mean that it has been successfully provisioned? But when I pick up my phone, there is still no dial tone. What am I still missing??? How do I know if my IAXy has been properly provisioned? Thanks!! Daiku wrote on 2005/01/18 20:59: Quoting from message: 05/01/18 20:24 +0900 sent by Leonardo Gomes Figueira: If you don't wanna install cygwin you can download iaxyprov compiled with Cygwin from: ftp://ftp.planetarium.com.br/pub/util/voip/iaxyprov/ Hi, and thanks for the hint...! A few days ago another helpful list subscriber sent me a small utility that he compiled and tested himself, but since that day i have not been at the place yet where i can use the Windows machine. Sometime this week or next week... I'll report the results here when all is done. Thanks regards: H. D. -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Quoting from message: 05/01/12 14:23 +0900 sent by [EMAIL PROTECTED]: I just tested another way... On windows, install Cygwin, download iaxyprov, make, and you can run it under Cygwin It works, I just provisioned my IAXy with it Bingo. :-) Since i have access to a Windows machine at work, i'll try that route as well... Thanks regards: Hendrik -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
I just tested another way... On windows, install Cygwin, download iaxyprov, make, and you can run it under Cygwin It works, I just provisioned my IAXy with it ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Hi, hoping that experienced hands will quickly show me the right way: after a fruitless web search i am turning to this list with my rather elementary question: is there any other way to communicate with the IAXy besides using special utility software that needs to be compiled under UNIX? Here is the story: about two months ago, after some not very satisfactory attempts at using SIP (my phone adapter and router don't seem to be able to handle SIP's special requirements for free passage through umpteen ports), i decided to try out hat i think is the conceptually better alternative anyway, IAX, and signed up with Diamondcards, a phone service provider using the IAX protocol. And today the post office delivered the IAXy adapter that i ordered from Digium (i had it shipped surface mail since i live in Okinawa and would have had to pay ovcer 50 bucks for air delivery). To my surprise there was no manual, not even a single sheet with instructions, in the package, but i quickly found a setup guide on Digium's website. However, i can't make much sense of the rather sparse instructions about provisioning the box (what's the difference between configuring and provisioning?). All i want to do is to tell the device my user ID, my password, and the server i want to connect to, but, as i found out at http://ruk.ca/article/2501 , while the Sipura unit has a friendly web-based configuration tool, the IAXy requires compiling a small Unix utility which is then used to provision the IAXy. Well, my two computers are Macs from the OS 7 era, so there is no way i can compile or run that utility to talk to the IAXy. And although i played around a bit with the telephone and even got the dial tone to come up once by punching some random number on the keypad, i am not optimistic that it is actually possible to configure the IAXy via the telephone's key pad - i couldn't find anything about this topic on the web. So... how can i get the IAXy to work? Thank you in advance: H. Daiku -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
I think you need that provisioning tool from digium. And you need a unix system to compile and run it. I dont think theres any port to your OS. Sorry... On Saturday 08 January 2005 08:08, Daiku wrote: Hi, hoping that experienced hands will quickly show me the right way: after a fruitless web search i am turning to this list with my rather elementary question: is there any other way to communicate with the IAXy besides using special utility software that needs to be compiled under UNIX? Here is the story: about two months ago, after some not very satisfactory attempts at using SIP (my phone adapter and router don't seem to be able to handle SIP's special requirements for free passage through umpteen ports), i decided to try out hat i think is the conceptually better alternative anyway, IAX, and signed up with Diamondcards, a phone service provider using the IAX protocol. And today the post office delivered the IAXy adapter that i ordered from Digium (i had it shipped surface mail since i live in Okinawa and would have had to pay ovcer 50 bucks for air delivery). To my surprise there was no manual, not even a single sheet with instructions, in the package, but i quickly found a setup guide on Digium's website. However, i can't make much sense of the rather sparse instructions about provisioning the box (what's the difference between configuring and provisioning?). All i want to do is to tell the device my user ID, my password, and the server i want to connect to, but, as i found out at http://ruk.ca/article/2501 , while the Sipura unit has a friendly web-based configuration tool, the IAXy requires compiling a small Unix utility which is then used to provision the IAXy. Well, my two computers are Macs from the OS 7 era, so there is no way i can compile or run that utility to talk to the IAXy. And although i played around a bit with the telephone and even got the dial tone to come up once by punching some random number on the keypad, i am not optimistic that it is actually possible to configure the IAXy via the telephone's key pad - i couldn't find anything about this topic on the web. So... how can i get the IAXy to work? Thank you in advance: H. Daiku -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
So... how can i get the IAXy to work? Someone you with a linux server can probably provision your IAXy building the provision prog from downloadable source. They would need to know a few things about your network and also the network you need to connect to. Just about anyone with a working asterisk can of course do it for you. Fill out this info and send it to them: ; use ONE of the next two lines (change address if nec) ; dhcp ;ip: 192.168.1.15 ; internal LAN ip address netmask: 255.255.255.0 ; ;gateway: 192.168.1.1 ; change as needed codec: ulaw server:nnn.nnn.nnn.nnn ; IAX2 server user: username pass: password options: register ;heartbeat ;debug ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] How do i talk to the IAXy...? (Newbie Alert)
Quoting from message: 05/01/08 19:12 +0900 sent by Arthur B Olsen: I think you need that provisioning tool from digium. And you need a unix system to compile and run it. I dont think theres any port to your OS. Quoting from message: 05/01/08 20:14 +0900 sent by Wilson Pickett: Someone you with a linux server can probably provision your IAXy building the provision prog from downloadable source. They would need to know a few things about your network and also the network you need to connect to. Just about anyone with a working asterisk can of course do it for you. Thanks, Arthur and Wilson... i got an idea now what to do: i'll try to locate someone who is using Asterisk and who lives right here in Okinawa, so that this job doesn't get too expensive...I suppose there exist some directories of Asterisk users? What would you suggest is a good way to find Asterisk users in Okinawa, to get started? I am hoping that theree might even be a local club / support group of sorts. Thanks again! Regards: H. Daiku -- ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
