Re: [Asterisk-Users] Junghanns, Germany ISDN settings
Thanks for the info, I am confused still ;-) It sounds like I need NT mode -- there are NTBA boxes involved at my location... And then -- what do I do about Termination of S/T Interface ?? and Power Feeding? http://www.junghanns.net/downloads/quadbrijumpersnew.pdf That's what I'm referencing Someone feed me some tips please! - Original Message - From: Florian Overkamp [EMAIL PROTECTED] To: Chris Earle (CBL) [EMAIL PROTECTED]; Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Saturday, March 11, 2006 5:08 AM Subject: Re: [Asterisk-Users] Junghanns, Germany ISDN settings Hi Chris, Chris Earle (CBL) wrote: I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. It really depends what you will be hooking up to the asterisk box. If you are connecting to a telco's S0 bus you want the card to be in TE mode (Terminal Equipment). If you are using multiple ISDN lines that are coupled together as one bundle (ask the telco) you will probably neet to configure it as p2p. If all lines are singular, use p2mp. If you will be connecting to a PBX, everything is dependant on how that PBX is configured. Best regards, Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Junghanns, Germany ISDN settings
Hi Chris, Chris Earle (CBL) wrote: Thanks for the info, I am confused still ;-) It sounds like I need NT mode -- there are NTBA boxes involved at my location... No, thats the point: If your telco delivers NT boxes, your equipment must use TE mode. It's always a pair: One side does NT mode, the other TE. Termination of S/T Interface ?? Usually you don't need to bother with that, the factory setting is fine. Power Feeding? Only needed in NT mode in combination with ISDN phones that require power feeding. Doesn't seem nessecary in your case. Best regards, Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Junghanns, Germany ISDN settings
Hi Chris, Chris Earle (CBL) wrote: I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. It really depends what you will be hooking up to the asterisk box. If you are connecting to a telco's S0 bus you want the card to be in TE mode (Terminal Equipment). If you are using multiple ISDN lines that are coupled together as one bundle (ask the telco) you will probably neet to configure it as p2p. If all lines are singular, use p2mp. If you will be connecting to a PBX, everything is dependant on how that PBX is configured. Best regards, Florian ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Junghanns, Germany ISDN settings
Hi all, I've got a Junghanns QuadBRI card which I'm going to install on a system in Germany Anyone give me some tips on the Jumper settings? I'm guessing it's going to be NT mode with p2p? I haven't used ISDN before. I'm going to also put a Digium TDM400P card in there to plug the analog phones into. I'm just worried about the jumpers and modes. Suggestions appreciated, -- Chris Earle System Solutions Specialist -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users