Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *-Euroisdn Italy
- Original Message - From: Emanuele Pucciarelli [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, June 24, 2005 11:12 PM Subject: Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *-Euroisdn Italy Robert Rozman wrote: I wanted to do this (it's principle I always follow) , but we even haven't received offer to pay for the stuff (we applied twice for offer of two cards), so bought where we actually could buy something... A customer of mine has had the same problem with the Italian dealer: they behaved as though they didn't want to sell :( I had this experience with original company No answer for 14 days... So I got a little precausious, how would SW-drivers support look like, if someone even doesn't want to sell HW... Regards, Rob. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *-Euroisdn Italy
Robert Rozman wrote: I had this experience with original company No answer for 14 days... So I got a little precausious, how would SW-drivers support look like, if someone even doesn't want to sell HW... Well, at least they wrote them :) Anyway, a bri [intense] debug is in order to help you on the dropped calls problem :) -- Emanuele (from Videm ;) ) ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- * - Euroisdn Italy
Robert Rozman wrote: I'm pulling my hair down and getting bold :-) . I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk) (hint: spend the extra $$ and support who's written the software!) I'm trying to do just plain transfer of call from pbx to ISDN through Asterisk... I'm doing that without any problems via normal HFC-S PCI A cards with Samsung PBX's. It seems like PBX hangsup, when call is progressing with no apparent reason. I'd kindly ask for any advice or some working example for this Would you mind checking if Layer 1 is UP (cat /proc/zaptel/*) and reporting bri debug span ... traces? On isdn side I also have a problem. Asterisk quite often says that it cannot create ZAP channel, although partticular span is reported up and active. I've also tried to connect loop between NT and TE port and call doesn't get through So it looks like it does not depend on the Panasonic gear! -- Emanuele ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *- Euroisdn Italy
- Original Message - From: Emanuele Pucciarelli [EMAIL PROTECTED] To: Asterisk Users Mailing List - Non-Commercial Discussion asterisk-users@lists.digium.com Sent: Friday, June 24, 2005 5:32 PM Subject: Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *- Euroisdn Italy Robert Rozman wrote: I'm pulling my hair down and getting bold :-) . I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk) (hint: spend the extra $$ and support who's written the software!) Hi, I wanted to do this (it's principle I always follow) , but we even haven't received offer to pay for the stuff (we applied twice for offer of two cards), so bought where we actually could buy something... What is your experience of authors of software ( I guess we all know whom we talk about) Regards, Rob. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- *- Euroisdn Italy
Robert Rozman wrote: I wanted to do this (it's principle I always follow) , but we even haven't received offer to pay for the stuff (we applied twice for offer of two cards), so bought where we actually could buy something... A customer of mine has had the same problem with the Italian dealer: they behaved as though they didn't want to sell :( What is your experience of authors of software ( I guess we all know whom we talk about) Here I don't see exactly what you mean. I referred to Klaus-Peter Junghanns, anyway! -- Emanuele ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Loosing hair on connecting Panasonic PBX- * - Euroisdn Italy
Hi, I'm pulling my hair down and getting bold :-) . I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk) I'm trying to do just plain transfer of call from pbx to ISDN through Asterisk... It seems like PBX hangsup, when call is progressing with no apparent reason. I'd kindly ask for any advice or some working example for this On isdn side I also have a problem. Asterisk quite often says that it cannot create ZAP channel, although partticular span is reported up and active. I've also tried to connect loop between NT and TE port and call doesn't get through I'd really appreciate if anyone has any advice on this problem, or any experience or working example for italian ISDN and particular Panasonic PBX. Thanks in advance, regards, Rob. I'm getting this : Jun 22 16:25:13 VERBOSE[5536]: -- Accepting overlap voice call from '432575513' to '000' on channel 0/2, span 4 Jun 22 16:25:21 VERBOSE[5536]: -- Executing [1;36;40mDial[0;37;40m([1;35;40mZap/11-1[0;37;40m, [1;35;40mZAP/g1/38670613063|60[0;37;40m) in new stack Jun 22 16:25:21 VERBOSE[5536]: -- Called g1/38670613063 Jun 22 16:25:32 DEBUG[5536]: Queuing frame from PRI_EVENT_PROCEEDING on channel 0/2 span 1 Jun 22 16:25:32 VERBOSE[5536]: -- Zap/2-1 is making progress passing it to Zap/11-1 Jun 22 16:25:32 DEBUG[5536]: Received AST_CONTROL_PROGRESS on Zap/11-1 Jun 22 16:25:32 DEBUG[5536]: Dunno what to do with control type 15 Jun 22 16:25:34 VERBOSE[5536]: -- Channel 0/2, span 4 got hangup Jun 22 16:25:34 DEBUG[5536]: Set option AUDIO MODE, value: ON(1) on Zap/2-1 Jun 22 16:25:34 DEBUG[5536]: Hangup: channel: 2 index = 0, normal = 33, callwait = -1, thirdcall = -1 Jun 22 16:25:34 DEBUG[5536]: Not yet hungup... Calling hangup once with icause, and clearing call Jun 22 16:25:34 DEBUG[5536]: disabled echo cancellation on channel 2 Jun 22 16:25:34 DEBUG[5536]: Set option TDD MODE, value: OFF(0) on Zap/2-1 Jun 22 16:25:34 DEBUG[5536]: Updated conferencing on 2, with 0 conference users Jun 22 16:25:34 DEBUG[5536]: Set option AUDIO MODE, value: OFF(0) on Zap/2-1 Jun 22 16:25:34 DEBUG[5536]: disabled echo cancellation on channel 2 Jun 22 16:25:34 VERBOSE[5536]: -- Hungup 'Zap/2-1' Jun 22 16:25:34 DEBUG[5536]: Exiting with DIALSTATUS=CANCEL. I have zapata.conf: [channels] switchtype = euroisdn pridialplan = dynamic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 usecallingpres=yes callerid=asreceived overlapdial=yes usecallingpres=yes echocancel = yes echocancelwhenbridged = yes echotraining = 100 ;--- ; p2p TE mode (for connecting ISDN lines in point-to-point mode) signalling = bri_cpe ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) ;signalling = bri_cpe_ptmp context=from-isdn group = 1 ; S/T port 1-4 (first quadBRI, or lower ports of an octoBRI) channel = 1-2 channel = 4-5 channel = 7-8 ;channel = 10-11 ;--- ; p2p NT mode (for connecting an ISDN PBX in point-to-point mode) ;signalling = bri_net ; p2p NT mode (for connecting an ISDN PBX in point-to-multipoint mode) signalling = bri_net_ptmp context=from-pbx group = 2 ;overlapdial=no ; S/T port 5-8 (second quadBRI, or upper ports of an octoBRI) channel = 10-11 ;channel = 13-14 ;channel = 16-17 ;channel = 19-20 ;channel = 22-23 ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Loosing hair on connecting Panasonic PBX- *- Euroisdn Italy
Date: Thu, 23 Jun 2005 08:50:50 +0200 From: Robert Rozman [EMAIL PROTECTED] Subject: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- * - Euroisdn Italy I'm pulling my hair down and getting bold :-) . I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk) Plenty of experience with the Panasonics, but not the EuroISDN. Contact me offline if you have KXTD816 questions. Regards, Justin [EMAIL PROTECTED] Newman Telecom, Inc. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Loosing hair on connecting Panasonic PBX- * - Euroisdn Italy
On Thu, 23 Jun 2005, Robert Rozman wrote: I'm pulling my hair down and getting bold :-) . I have Asterisk between Panasonic KXTD816 and Euroisdn in Italy (beronet octobri and bristuff Asterisk) I'm trying to do just plain transfer of call from pbx to ISDN through Asterisk... It seems like PBX hangsup, when call is progressing with no apparent reason. I'd kindly ask for any advice or some working example for this On isdn side I also have a problem. Asterisk quite often says that it cannot create ZAP channel, although partticular span is reported up and active. I've also tried to connect loop between NT and TE port and call doesn't get through I'd really appreciate if anyone has any advice on this problem, or any experience or working example for italian ISDN and particular Panasonic PBX. Look at the logs from a pri intense debug span X to see what causes the lines to be hung up. Make sure progress detection is disabled. Peter ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users