Carl Andersson wrote:
Maybe this is rather a hardware question, but I am posting it on this
list because the probability of someone else of you having tried this
is greater here than other places I can think of.
I have an ISDN card that is setup in NT mode using the zaphfc driver
in bristuff, and I got it working perfectly with one ISDN phone using
a crossover cable and 100 ohm termination at the end of the cable.
However, if I connect one more ISDN device to the ISDN bus both
devices stop working, so the question is:
Is it only possible to use one device with a HFC card in NT mode or is
there something else I need to do first to make it work with two devices?
Hi Carl,
I just started yesterday afternoon with exactly the same setup so you
are a bit ahead of me.
If anyone answers you directly then please be kind enough to forward
their comments to me.
I have not even tried to sort out trunks, bristuff or anything yet but
it might be worth pointing out that my initial problems were that, using
an old pIII motherboard with pci graphics, network plus 2 HFC bri isdn
cards, I ran out of IRQs. I had to lock down exclude the irq for the
network card before the 2 ISDN cards woke up. I now have the network 1
ISDN card on their own IRQ and the graphics and 2nd ISDN card sharing an
IRQ.
Maybe this could be a similar problem for you?
I'm using this HW with AAH 1.1
Keep in touch,
Cheers,
Zoltan
--
==
Geograph (Pty) Ltd
P.O. Box 31255
Tokai
7966
Tel:+27-21-7018492
Fax:+27-86-6115323
Mobile: +27-83-6004028
==
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
