[Asterisk-Users] PANASONIC KX-TS208W - Speakerphone Incompatible With Asterisk 1.2.3

2006-04-22 Thread broadbandvoice

I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does not work with it. It works fine when you pick up the handset. Anyone experinced this problem before, the speaker works fine with Verizon line. The phone is behind a Linsys router RT31P2.

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [Asterisk-Users] PANASONIC KX-TS208W - Speakerphone Incompatible With Asterisk 1.2.3

2006-04-22 Thread John Novack





[EMAIL PROTECTED] wrote:

I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does 
not work with it. It works fine when you pick up the handset. Anyone 
experinced this problem before, the speaker works fine with Verizon 
line. The phone is behind a Linsys router RT31P2.

Replace the batteries! Alkaline only, replace every 6 months
1.2.3 is also defective for other reasons. Upgrade
Using a TDM400, an ATA or ??
The phone works best with a 48V 20mA or better loop, so the FXS source 
voltage  may have an effect, and this cheap phone has no previsions 
for external power.


John Novack



___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [Asterisk-Users] PANASONIC KX-TS208W - Speakerphone Incompatible With Asterisk 1.2.3

2006-04-22 Thread broadbandvoice

Thanks for the response, I'll ask the client to change batteries, though it is a new phone less than two weeks. is there any reason why the Lanline(Verizon) work and not the Asterisk? The only differences is the Asterisk, Linksys router and the DSL modem. One of these 3 should be interfering.

-- Original message -- From: John Novack [EMAIL PROTECTED]  [EMAIL PROTECTED] wrote:I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W - Speakerphone does   not work with it. It works fine when you pick up the handset. Anyone   experinced this problem before, the speaker works fine with Verizon   line. The phone is behind a Linsys router RT31P2.   Replace the batteries! Alkaline only, replace every 6 months   1.2.3 is also defective for other reasons. Upgrade   Using a TDM400, an ATA or ??   The phone works best with a 48V 20mA or better loop, so the FXS source   voltage may have an effect, and this cheap phone has no previsions   for external power. 
   
  John Novack___  --Bandwidth and Colocation provided by Easynews.com --   Asterisk-Users mailing list  To UNSUBSCRIBE or update options visit:  http://lists.digium.com/mailman/listinfo/asterisk-users 

___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


Re: [Asterisk-Users] PANASONIC KX-TS208W - Speakerphone Incompatible With Asterisk 1.2.3

2006-04-22 Thread John Novack




The book states "batteries
not supplied" so perhaps they were never installed?

And what FXS circuit are you using to interface to Asterisk?
The difference in loop current between VeriZon and the local interface
could be an answer

John Novack


[EMAIL PROTECTED] wrote:

  Thanks for the response, I'll ask the client to change
batteries, though it is a new phone less than two weeks. is there any
reason why the Lanline(Verizon) work and not the Asterisk? The only
differences is the Asterisk, Linksys router and the DSL modem. One of
these 3 should be interfering.
  
  --
Original message -- 
From: John Novack [EMAIL PROTECTED] 

 
 
 
 
 [EMAIL PROTECTED] wrote: 
 
  I'm using Asterisk 1.2.3 and PANASONIC KX-TS208W -
Speakerphone does 
  not work with it. It works fine when you pick up the handset.
Anyone 
  experinced this problem before, the speaker works fine with
Verizon 
  line. The phone is behind a Linsys router RT31P2. 
  Replace the batteries! Alkaline only, replace every 6 months 
  1.2.3 is also defective for other reasons. Upgrade 
  Using a TDM400, an ATA or ?? 
  The phone works best with a 48V 20mA or better loop, so the
FXS source 
  voltage may have an effect, and this cheap phone has no
previsions 
  for external power. 
  
  John Novack 
 
 
 ___ 
 --Bandwidth and Colocation provided by Easynews.com -- 
 
 Asterisk-Users mailing list 
 To UNSUBSCRIBE or update options visit: 
 http://lists.digium.com/mailman/listinfo/asterisk-users 



___
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users