Re: [Asterisk-Users] PRI signaling experts please help

2005-08-26 Thread Eric Bishop
Already am using this option.


On 8/25/05, Jens von Bülow [EMAIL PROTECTED] wrote:
 Hi Eric,
 
 Don't you need to use out-of-band PRI signaling...
 
 From /etc/asterisk/zapata.conf
 snip
 ; PRI Out of band indications.
 ; Enable this to report Busy and Congestion on a PRI using out-of-band
 ; notification. Inband indication, as used by Asterisk doesn't seem to work
 ; with all telcos.
 ;
 ; outofband:  Signal Busy/Congestion out of band with RELEASE/DISCONNECT
 ; inband: Signal Busy/Congestion using in-band tones
 priindication = outofband
 /snip
 
 Hope that Helps
 Jens
 
 
 -Original Message-
 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Bishop
 Sent: 25 August 2005 09:32 AM
 To: Asterisk Users Mailing List - Non-Commercial Discussion
 Subject: [Asterisk-Users] PRI signaling experts please help
 
 Hi all,
 
 Our Asterisk box sends calls outbound via either SIP (through our VoIP
 provider) or an E1 PRI (directly connected via a TE410P). When we dial
 a number that is engaged via our VoIP provider we get the following on
 the Asterisk console (numbers and IP addresses changed to protect the
 innocent):
 
   -- Called [EMAIL PROTECTED]
-- Got SIP response 486 Busy here back from 123.123.123.123
-- SIP/sip-outbound-af71 is busy
  == Everyone is busy/congested at this time
 
 This is what we want as it then send the call to priority n+101 and we
 can handle it any way we want from there. However if the outbound call
 is made via the PRI (Zap channel) to an enaged number it simply plays an 
 enaged
 signal to the caller and never progresses to priority n+101.
 
 Anyone have any suggestions?
 ___
 --Bandwidth and Colocation sponsored by Easynews.com --
 
 Asterisk-Users mailing list
 Asterisk-Users@lists.digium.com
 http://lists.digium.com/mailman/listinfo/asterisk-users
 To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users

___
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


[Asterisk-Users] PRI signaling experts please help

2005-08-25 Thread Eric Bishop
Hi all,

Our Asterisk box sends calls outbound via either SIP (through our VoIP
provider) or an E1 PRI (directly connected via a TE410P). When we dial
a number that is engaged via our VoIP provider we get the following on
the Asterisk console (numbers and IP addresses changed to protect the
innocent):

  -- Called [EMAIL PROTECTED]
   -- Got SIP response 486 Busy here back from 123.123.123.123
   -- SIP/sip-outbound-af71 is busy
 == Everyone is busy/congested at this time

This is what we want as it then send the call to priority n+101 and we
can handle it any way we want from there. However if the outbound call
is made via the PRI (Zap channel) to an enaged number it simply plays an enaged
signal to the caller and never progresses to priority n+101.

Anyone have any suggestions?
___
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users