Re: [Asterisk-Users] R2 in Bolivia

2005-01-27 Thread Jorge Verastegui Gallardo 



These are log of incoming calls

Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 MFC/R2 call control(1)
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 MFC/R2 make call
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Making a new call with CRN 32769
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Tx bits 0x1   [1/   1/  0/  0]
-- Called g3/70513933
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event 
Dialing - 0x9841460
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Rx bits 0xD   [1/  40/201/  0]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Tx tone 7 on  [2/  40/202/  0]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Rx tone 5 on  [2/  40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Tx tone 7 off [2/  40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Rx tone 5 off [2/  40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Tx tone E on  [2/  40/202/201]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Rx tone 5 on  [2/  40/202/207]
Jan 26 18:17:50 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:50 mfcr2 Tx tone E off [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Rx tone 5 off [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Tx tone E on  [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Rx tone 4 on  [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Tx tone E off [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Rx tone 4 off [2/  40/202/207]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Far end disconnected - state 0x40
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event 
Far end disconnected - 0x9841460
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:3181 handle_uc_event: CRN 32769 - 
far disconnect cause 42
-- Channel 0 got hangup
-- UniCall/1-1 is circuit-busy
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 MFC/R2 call control(6)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 MFC/R2 drop call(cause=16)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Clearing fwd
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Tx bits 0x9   [2/ 800/209/207]
-- Hungup 'UniCall/1-1'
  == Everyone is busy/congested at this time
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Rx bits 0x9   [1/ 800/211/  0]
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Call disconnected - state 0x800
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event 
Drop call - 0x9841460
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 MFC/R2 call control(7)
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 MFC/R2 release call
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:703 unicall_error: UniCall: 
2005/01/26 22:17:51 mfcr2 Destroying call with CRN 32769
Jan 26 18:17:51 WARNING[8573]: chan_unicall.c:2848 handle_uc_event: UC event 
Release call - 0x9841460
-- UC channel 1 released
-- H.323 call 'ip$200.87.125.195:30008/25331' cleared, reason 7 (Remote 
user stopped calling)



On Wed, 2005-01-26 at 07:53 +0800, Steve Underwood wrote:

 Hi Jorge,
 
 You might be the first person to try the Bolivian variant. I need more 
 information to make any sense of the problem. In 
 /etc/asterisk/unicall.conf add the line:
 
 loglevel = 1023
 
 and try again. You should get a much more detailed log of what happens. 
 Send that to me.
 
 Regards,
 Steve
 
 [EMAIL PROTECTED] wrote:
 
 Hi
 I made some tests with new MFC/R2 an unicall support for asterisk
 and now have dialing out problem using UniCall / R2.
 This is the error report in cli
 
  UC channel 30 protocol

[Asterisk-Users] R2 in Bolivia

2005-01-25 Thread jorge 
Hi
I made some tests with new MFC/R2 an unicall support for asterisk
and now have dialing out problem using UniCall / R2.
This is the error report in cli

 UC channel 30 protocol error. Cause 32772


I hope this helps.

Thanks in advance,

Jorge


PD: de conf files
zaptel.conf

   span=1,1,1,cas,hdb3
   cas=1-15:1010
   cas=17-31:1010protocolclass=mfcr2

unicall.conf

protocolvariant=bo,20,4
protocolend=cpe
group = 3
channel = 1-15
;skip time slot 16
channel=17-31

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] R2 in Bolivia

2005-01-25 Thread Miguel Cavazos 
What version are you using for chan_unicall?
On 25/01/2005, at 1:57 PM, [EMAIL PROTECTED] wrote:
Hi
I made some tests with new MFC/R2 an unicall support for asterisk
and now have dialing out problem using UniCall / R2.
This is the error report in cli
 UC channel 30 protocol error. Cause 32772
I hope this helps.
Thanks in advance,
Jorge
PD: de conf files
zaptel.conf
   span=1,1,1,cas,hdb3
   cas=1-15:1010
   cas=17-31:1010protocolclass=mfcr2
unicall.conf
protocolvariant=bo,20,4
protocolend=cpe
group = 3
channel = 1-15
;skip time slot 16
channel=17-31
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

--
Saludos,
Miguel Cavazos
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Re: [Asterisk-Users] R2 in Bolivia

2005-01-25 Thread Steve Underwood 
Hi Jorge,
You might be the first person to try the Bolivian variant. I need more 
information to make any sense of the problem. In 
/etc/asterisk/unicall.conf add the line:

loglevel = 1023
and try again. You should get a much more detailed log of what happens. 
Send that to me.

Regards,
Steve
[EMAIL PROTECTED] wrote:
Hi
I made some tests with new MFC/R2 an unicall support for asterisk
and now have dialing out problem using UniCall / R2.
This is the error report in cli
UC channel 30 protocol error. Cause 32772
I hope this helps.
Thanks in advance,
Jorge
PD: de conf files
zaptel.conf
  span=1,1,1,cas,hdb3
  cas=1-15:1010
  cas=17-31:1010protocolclass=mfcr2
unicall.conf
protocolvariant=bo,20,4
protocolend=cpe
group = 3
channel = 1-15
;skip time slot 16
channel=17-31
 

___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users