[Asterisk-Users] R2 or EM for E1 CAS pbx to pbx link
hi, As i understand (correct me if i am wrong) R2 signalling consists of 2 parts: Line Signalling (supervisory signalling)and the InterRegister Signalling (call control signalling). Now i am testing this in a lab with an Analyzer. TheIdle CAS ABCD bits are 1000. Thelatest problem that i see is that asterisk drops the call after seize acknowledge, where it should answer. I am still looking at it. Has anyone tested the libr2 and found such problems. TheCAS table... I havedemanded one but till the time i get it I am experimenting with the analyzer. I wanted the developer of libr2, Steve Underwood to comment on this.its his code he knows best. Please comment sincerly, Janjua Add photos to your messages with MSN 8. Get 2 months FREE*. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] R2 or EM for E1 CAS pbx to pbx link
M.A. Ali wrote: hi, As i understand (correct me if i am wrong) R2 signalling consists of 2 parts: Line Signalling (supervisory signalling) and the InterRegister Signalling (call control signalling). Now i am testing this in a lab with an Analyzer. The Idle CAS ABCD bits are 1000. The latest problem that i see is that asterisk drops the call after seize acknowledge, where it should answer. I am still looking at it. Has anyone tested the libr2 and found such problems. The CAS table... I have demanded one but till the time i get it I am experimenting with the analyzer. I wanted the developer of libr2, Steve Underwood to comment on this. its his code he knows best. Please comment I keep commenting, and nobody seems to listen. libr2 is a half implemented useless piece of rubbish. The real working R2 is not available from me just yet. Regards, Steve ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] R2 or EM for E1 CAS pbx to pbx link
hi, thanx for the response. I just tried to work on R2 CAS but i found that the libr2 has not been implemented well and tested. I think in addition to EM, R2 can also be used in a pbx to pbx E1 link. what do tou suggest Sam ?? About the R2 implementation for asterisk i have seen in the list that steve has implemented 95% of that...but we dont see any release of that. any current info on R2 development?? and Sam you are right i don't have the CAS table of the other switch. But i think i can get one. help me out in this. I have to make a E1 pbx to pbx connection using CAS. thanks in advance janjua Help STOP spam with the new MSN 8 and get 2 months FREE* ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] R2 or EM for E1 CAS pbx to pbx link
Hi, So, u are using a new thread...it is better if you do notchange the message subject so we can trace u properly. Before dealing with R2 signaling which is register_signaling, you need to deal with CAS or ABCD signaling which is line_signaling and be able to establish (and drop) calls correctly. Once this is done, R2 signalingcan take place ---iffully available in*,and R2 tones will be able totravel between switches thru theestablished voice channel before callers be allowed to talk. So, again... you need de CAS table of the far_end switch or pbx. Get it and attach it to your post. Also, if u thing u will not able to negotiate with your far en party, ask him/her in advance what signaling and start arrangement should you use. Should tell you something like 4wire EM, IMMediate. This info is also crucial. Regards Sam\\\ - Original Message - From: M.A. Ali To: [EMAIL PROTECTED] Sent: Thursday, January 22, 2004 5:01 AM Subject: [Asterisk-Users] R2 or EM for E1 CAS pbx to pbx link hi, thanx for the response. I just tried to work on R2 CAS but i found that the libr2 has not been implemented well and tested. I think in addition to EM, R2 can also be used in a pbx to pbx E1 link. what do tou suggest Sam ?? About the R2 implementation for asterisk i have seen in the list that steve has implemented 95% of that...but we dont see any release of that. any current info on R2 development?? and Sam you are right i don't have the CAS table of the other switch. But i think i can get one. help me out in this. I have to make a E1 pbx to pbx connection using CAS. thanks in advance janjua Help STOP spam with the new MSN 8 and get 2 months FREE* ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
