Re: [Asterisk-Users] Re: Cisco 7970 Won't boot after factory reset
Hi Keith, I have a TFTP server set up with the proper files on it, but after a factory reset, how does the phone know where to find the TFTP server..? I cannot get into it to set the TFTP server IP address. Thanks On Wed, 16 Feb 2005 20:02:22 -0500 Keith O'Brien [EMAIL PROTECTED] wrote: It is trying to download its firmware. You need to setup a TFTP Server. Also be aware that the 7970 only supports SCCP not SIP. Further, the * implementation of SCCP doesn't support the latest version of SCCP which is required for the 7970. I don't see how it would work at all with *. Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do a factory reset before trying to configure it to work with Asterisk. After the factory reset, it will not boot at all, instead sits with the line button lights flashing one at a time in sequence. I have had no luck trying to figure it out - anyone run into the same problem that can lend a hand..? ** Richard J. Sears Vice President American Internet Services [EMAIL PROTECTED] http://www.adnc.com 858.576.4272 - Phone 858.427.2401 - Fax INOC-DBA - 6130 I fly because it releases my mind from the tyranny of petty things . . Work like you don't need the money, love like you've never been hurt and dance like you do when nobody's watching. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] Re: Cisco 7970 Won't boot after factory reset
Colin, Thanks for that pointer. 'preciate it -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Colin Anderson Sent: Thursday, February 17, 2005 12:22 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Re: Cisco 7970 Won't boot after factory reset how does the phone know where to find the TFTP server..? Dude, option 150 in your DHCP server: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note0 9186 a00800942f4.shtml We use the same option for our Mitel phones. HTH. ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: Cisco 7970 Won't boot after factory reset
It is trying to download its firmware. You need to setup a TFTP Server. Also be aware that the 7970 only supports SCCP not SIP. Further, the * implementation of SCCP doesnt support the latest version of SCCP which is required for the 7970. I dont see how it would work at all with *.Hi Everyone - I just got my hands on a Cisco 7970 and was told that I should do afactory reset before trying to configure it to work with Asterisk.After the factory reset, it will not boot at all, instead sits with theline button lights flashing one at a time in sequence.I have had no luck trying to figure it out - anyone run into the sameproblem that can lend a hand..? ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
